Used Waterjet Head for sale (9,885)

Condition: used, Schmid-Kosta TWS/6 Dividing Head Horizontal/Vertical Quick-Change Dividing Head – Schmid-Kosta Type/Model: TWS/6 Condition: Used Technical Data Center height: 200 mm Clamping surface 1: 200 mm x 250 mm Clamping surface 2: 350 mm x 250 mm Bore: 72 mm Rotary table: Ø 250 mm Weight: approx. 60 kg Isdpfezw H Iyjx Aiyebb

Condition: good (used), functionality: fully functional, For sale is a cylinder head resurfacing machine/cylinder block milling machine in good condition. This machine has never been used for grinding, only for milling. The machine can be inspected at any time. An invoice with 19% VAT shown separately will be issued. Iedpfx Aiey Spmdeyebb

Condition: used, Year of construction: 1975, machine/vehicle number: 2622, functionality: unexamined, throat depth: 300 mm, Column drilling machine Alzmetall AB 35 S, serial no. 2622, year of manufacture 1975. Drilling capacity: Ø 35 mm, overhang: 300 mm. Round drilling table with T-slots, height-adjustable, mounted on a round column with a base plate. Isdoz A Uqwopfx Aiysbb Control panel with main switch and cutting speed chart on the drilling head. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex works; dismantling and loading upon agreement. All information without guarantee.

Condition: used, Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 9615, total length: 31,200 mm, total height: 2,300 mm, total width: 4,600 mm, overall weight: 9,000 kg, Equipment: rotational speed infinitely variable, safety light barrier, SC3-200-5 fully automatic cutting system Angle and inclination drive for the sawing station Automatic infeed system Feed cross conveyor (6 strands, wood length up to 14 m) Component support for small cross-sections Control unit for waste disposal Conveyor belt for waste disposal (integrated) 6-arm stacking table (wood length up to 10 m) Combination support for vertically operating tools 2x Vertical drilling unit 2.2 kW 2x Vertical chain mortiser 5.5 kW Additional combination support, vertical, for rotary milling cutter Rotary milling head 7.5 kW Ibjdpfxjzyihuj Aiyeb Combination support for horizontally operating tools 2x Horizontal drilling unit 2.2 kW Marking device, rear Marking device, bottom Marking device, front Angled conveyor, right

Condition: good (used), Year of construction: 2003, High-quality veneer saw with planer head for subsequent trimming. Iedpfxezlqbao Aiyjbb Maximum cutting length: 3050 mm. Equipped with a rear finger stop.

Condition: like new (used), Year of construction: 2022, Complete weighing and bagging line, all stainless steel. Consists of PFM Zenith EW EVO vertical bagging machine with Yamato 14 head multi-head weigher with 7 litre buckets. Minimum weight 20 grams - max weight 3000 grams. Complete with incline feeding conveyor and heavy duty stainless steel gantry. Ijdpfx Ajz Dhr Djiyjbb

Year of construction: 1996, condition: used, For sale is a heavy-duty CNC milling head, SK50. This is a universal milling head in a heavy-duty design for SK50 toolholders. It is ready for immediate use. It can be manually swiveled and does not have internal cooling. It is suitable for various machines, such as CME, MTE, and others. It offers excellent clamping force, runout, and smooth operation. It can be test-run on our machines. It was removed from an MTE BF2200, which was in production until the very end. If you are interested, please contact us. The price does not include transportation. Ibjdpfxjzmq Icj Aiyeb

Year of construction: 2012, condition: excellent (used), Welding and cleaning line in a 90° configuration, running from right to left, consisting of a 4-head welding machine SMK 504, a cooling table, and an automatic cleaning machine EPA 479 with a turning station. Maximum welding size = 3,570 mm x 2,500 mm, currently programmed for Kömmerling 76 AD, 88 MD profiles. CNC cleaning machine with corner and shear hinge drilling device for Siegenia fittings, sealing strip holder, WINDOWS control system on the welding and cleaning machines, and safety fences. Ijdez Dihyjpfx Aiyjbb Currently set for V-groove processing.

Condition: good (used), Year of construction: 1997, functionality: fully functional, Stürtz horizontal 4-head welding machine for welding plastic components. Welding dimensions: 2600 x 3000 mm Iedpfx Aiszfky Noyebb Weld bead height limit: 2.0 mm (adjustable to 0.2 mm) Suitable for welding entrance doors. Penetration depth: 6.0 mm Operation via PC Jetter (Dell PC conversion kit)

Condition: used, Year of construction: 1989, Plastic screwcap Ibjdpfxjzzpklj Aiyob

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 41,622 h, controller model: Siemens Sinumerik 840 D, laser power: 3,000 W, sheet thickness (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale is a TRUMPF TruLaser 5030 fiber (L41) including LiftMaster Compact! The machine will remain powered on until September 23, 2026. Disassembly will be carried out by a certified TRUMPF partner. TECHNICAL DETAILS Laser power: 3,000 W Working area (X / Y / Z): 3,000 × 1,500 × 115 mm Sheet metal thickness steel max.: 15 mm Sheet metal thickness stainless steel max.: 20 mm Sheet metal thickness aluminum max.: 15 mm Simultaneous speed max.: 235 m/min Accuracy: ± 0.1 Sheet metal format max.: 3,000 × 1,500 mm Sheet metal format min.: 1,000 × 1,000 mm Sheet metal thickness max.: 25 mm Sheet metal weight max.: 900 kg Stack height loading side max.: 90 mm Part size min.: 150 × 150 mm Sheet metal thickness max.: 25 mm Sheet metal weight max.: 900 kg Stack height unloading side max.: 250 mm MACHINE DETAILS Control model: Siemens SINUMERIK 840D SL Touch color screen: 17" Operating hours: 81,443 / 76,533 / 41,622 h Dimensions & Weight Dimensions (L x W x H): 9,373 x 2,964 x 2,383 mm Weight of base machine: 12,700 kg EQUIPMENT LiftMaster Compact 1530 AL21 Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives Closed beam guidance via laser light cable (LLC) Machine cooling unit water-air Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Power supply for TruDisk via the machine Work area lighting Ibodpez A S Dzefx Aiyjb Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Solid-state laser TruDisk 3001 with one LLC output Light guide cable according to standard layout Laser cooling unit water-air Excitation via pump diodes Laser power control Laser logbook function Universal cutting head with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine for height control and sheet metal edge detection Simple workshop programming Extended workshop programming Fast reproduction Integrated technology data Automatic shutdown Programmable cutting gas pressure FastLine USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Integrated compact dust extraction system Machine enclosure with certified viewing window and door on the right Synchron loader Scrap removal device and double sheet detection Movable removal rake Loading and unloading station Separation of thin sheet metal for synchronous loader Raw material and unpacking station Extended pallet extension on the machine Inventory interface

Condition: good (used), Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, universal drilling head, boring tool, facing head -Manufacturer: Schmid, plan and boring head -Type: S.AdK 6 -Recording: SK50 -Adjustment accuracy: 0.01 mm Iedsxdwx Aepfx Aiyjbb -Dimensions: 175/150/H305 mm -Weight: 24 kg

Condition: good (used), Year of construction: 2016, 2016 Tornos DT 26 Swiss Type CNC Sliding Head Lathe With Fanuc Series 31i-Model B Control & Tornos SBF326-3.2M Bar Feeder Maximum Bar Ø25.4mm. Rapid Traverse 32m/min. Standard Workpiece Length With Guide Bush 225mm. Standard Workpiece Length Bushless 50mm. Main Spindle- Spindle Speed Range 0-10,000rpm (10.5kW Motor). Maximum Turning Tools 6 (Shank 12 x 12mm.). Number Of Frontal Tools (Main-Operation/Counter-Operation) 4/4. Max Front Drilling Ø12mm, Max Front Tapping M10 x 1.5.Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter Spindle-Maximum Bar Ø25.4mm. Main Spindle- Spindle Speed Range 0-15,000rpm (5kW Motor). Max Insertion Length Of Workpiece Into Counter Spindle 100mm. Max Standard Length Of Workpiece 120mm. Max Back Drilling Ø10mm, Max Back Tapping M6 x 1. Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter-Operation-Max Number Of Tool Positions 8, Max Rotating Tool Speed 7,200rpm (1kW Motor). S/No. 2581050017 (2016). Please note a loading charge of £200 + VAT to be added to buyer's invoice. Ibjdpfx Aioz Dg Evjyeb With Coolant System, Hennig Chip Conveyor, Krauft Bauer Fire Suppressor Unit, SEI Mist Extraction Unit, Parts Catcher, Parts Conveyor, Signal Tower, Tool Kit, Cromar Swarf Bin & Manuals. Overall Dimensions L2,230 x W1,250 x H1,730mm. Weight 2,400kg.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Fully reconditioned milling head from a Gleason Pfauter P210L – manufactured in 2004. Isdpfx Aozr Hd Rjiyobb

Condition: good (used), Year of construction: 2013, operating hours: 18,600 h, functionality: fully functional, water pressure: 4,000 bar, Waterjet FLOW MACH 3 Ijdpfx Aiswmcmtsyobb Year of production: 2013 Working area: 3000x2000 Working hours: 18600 Advantage of the machine DWJ - automatic compensation of the verticality of the cut Availability: 6 months Location: Croatia Parity: EXW Belišće

Condition: used, Year of construction: 2006, Masterfill Filling Machine S 500 The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products. Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards. The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill S 500 integrates seamlessly into existing production lines. Key Features - High-precision volumetric filling system - Suitable for liquid and semi-viscous products - Hygienic stainless-steel construction - Easy-to-use control interface - Adjustable filling speed and volume - Low maintenance and easy cleaning - Compact and space-efficient design Applications - Milk and dairy products - Yogurt and desserts - Cream and sauces - Beverage and liquid food products Materfill S500 6 head fill while rise filler M2-AF Serial number 4716 YOM 2006 Filling capacity 2ml to 2000 ml The filler is a 6 head automatic filler, with the capacity to store 50 separate preset menus, Brief FDS • Controlled by Siemens S7 PLC via Mitsubishi Beijer HMI • Jars feed in vis constant stainless steel slat band • Jars indexed via program-controlled infeed and outfeed pneumatic gates. • Jars filled via positive pressure within 50 ltr holding tank (this could be changed easily to a constant positive pressure into manifold via modulating pump) • Volume controlled via Nixon BNO turbine flow meters communications with siemens high speed counter. • Liquid feeds into jar with rise during fill or above jar for fill time • Full SIP, CIP, and flush capability programs available Dico CapperSerial number 3/379Brief FDS  Capper with rotating starwheel  Will cap Square of round Jar/ Bottles (change parts included)  Jar enters, signals PEC starwheel turns 90⁰ under capping head  Capping lowers on cam, retracts on cam  Jar/ bottle clamp activated of adjustable cam onto 5/2 valve  Starwheel turns 90⁰ onto exit conveyor  Current capping head removable, for 40mm cap (no alternative head)  All systems work on cams and relays, no PLC  Motor runs on DOL for capping (clutch adjusted and variable speed gearbox)  Cam motor uses inverter. Guards with interlocked access doorway Required services.  3 Phase 32-amp electrical supply  7 Bar air pressure Main control panel Cap sorter and feederRNASRC-N 400-2LSerial no 00801Brief FDS  40mm cap sorter and feeder Ibsdpfx Aioywuczeyeb  Vibrating bowl agitates caps upwards  Air jets and cut outs sort caps placing in correct orientation  Cap chute allows smooth passage to dispensing head with some adjustment  Cap dispenser works on bottle/jar passing under and catching cap, this allows the retaining jaws to open and release cap  Side or over independent speed controlled wheel assists in cap leveling Required services.  240V electrical supply  3 Bar air pressure Filling volume: 25-2000 ml Controls: SIEMENS S7 via Mitsubishi H...

Condition: like new (used), VMK Automatic Heading Machine for Pelagic Fish VMK industrial heading machine for pelagic fish, designed to automate the cutting and removal of fish heads within industrial processing lines for seafood products. The equipment allows for the continuous performance of feeding, positioning, and heading operations, reducing manual handling and facilitating a uniform flow towards subsequent processing stages. Its industrial construction, primarily in stainless steel, is specifically designed for operation in humid and demanding environments typical of fish processing plants. MAIN FEATURES -Manufacturer: VMK -Type: Automatic fish heading machine -Application: Pelagic fish -Function: Cutting and removal of the head -Controlled feeding and positioning of the fish -Automatic and continuous processing -Integrated transport system -Multiple feeding channels -Construction primarily in stainless steel -Hygienic design for the food industry -Robust construction for industrial use -Accessibility for cleaning and maintenance -Integrable into existing fish processing lines -Suitable for continuous operation in seafood processing plants Ibsdoyuffyepfx Aiysb APPLICATION The VMK heading machine is designed to be integrated into the preparation area of an industrial processing line for pelagic fish. The fish is fed and guided in a controlled manner towards the cutting area, where the heading operation is performed automatically. Subsequently, the product can continue to the next preparation or processing stages. It can be integrated with: Fish feeding systems Conveyors Sorting and grading machines Cutting and evisceration equipment Filleting machines Fish washers Inspection tables and belts Freezing systems Packaging equipment Complete fish processing lines APPLICATIONS Particularly suitable for canning industries, fish processing plants, and companies specializing in seafood products that need to automate the preparation of pelagic species. It can be used as part of lines designed for the processing of sardines, mackerel, and other species of pelagic fish, depending on the format, product dimensions, and installed configuration. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 37,000 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Laser power: 3,200 watts Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,250 mm Travel range, Z-axis: 115 mm Iedpsz A D Irefx Aiyebb Sheet thickness, structural steel max.: approx. 20 mm Sheet thickness, stainless steel max.: approx. 15 mm Sheet thickness, aluminum max.: approx. 8 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Total connected load approx.: 88 kVA Machine hours: 74,000 h Beam hours: 37,000 h Dimensions & Weight Footprint: 8,660 x 6,110 x 2,700 mm Machine weight: approx. 7,300 kg EQUIPMENT Closed machine frame with integrated laser unit Automatic pallet changer TFT color screen Positioning laser diode Spray device Motion unit for high-precision machining Additional high-dynamic Yp axis Drives with maintenance-free three-phase servomotors Closed beam guidance Conveyor for small parts and waste TRUMPF laser CO2 laser TruFlow 3200 High-frequency excitation Low-maintenance turbo radial blower Gas mixer (integrated) Laser power control Laser logbook function Laser cutting head with 5" lens Laser cutting head with 7.5" lens Universal quick-change device ControlLine Control system SINUMERIK 840D Automatic shut-off ContourLine SprintLine Teleservice Microweld RJ45 network connection Network connection via telediagnostics CE marking Light barriers Multi-chamber extraction system Compact dust collection system

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: CC41011401EJ, working width: 2,000 mm, cutting width (max.): 2,000 mm, cutting height (max.): 70 mm, Investronica CV040/070 automatic multi-ply cutting system, built February 2003 in Madrid. In working order. TECHNICAL DATA Manufacturer: Investronica Sistemas, Madrid (Spain) Model: CV040/070 Identification: LOOCC4.100V000.B0 Serial number: CC41011401EJ Date of manufacture: February 2003 Useful cutting width: 2,000 mm Cutting height: 70 mm compressed fabric Cutting window: 2,200 mm, continuous length with conveyor belt Vacuum system: high-efficiency vacuum generation, integrated module Feed: automatic advance system Sharpening: automatic blade sharpener on the cutting head Blade speed: variable control Table: evacuation table with conveyor belt Approximate weight: 3,000 - 4,000 kg, to be confirmed on dismantling EQUIPMENT INCLUDED 1. Investronica CV040/070 automatic cutting table with cutting head, blade sharpener, integrated vacuum module and evacuation table with conveyor belt. 2. Control station built into the machine, with monitor, keyboard and computer. Iedpfx Aisz Atvuoyjbb 3. Investronica P2000 pattern plotter. The machine is installed and running in Seville. It can be seen and tested in operation by appointment. Machine owned by the seller, free of encumbrances.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, empty load weight: 130 kg, input voltage: 400 V, warranty duration: 6 months, KARCHER HDS SUPER M Eco HOT WATER PRESSURE WASHER NEW PUMP HEAD The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A NEW durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 900 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3-phase Ibsdpfx Asxdxxdeiyjb Discharge capacity [l/h]: 900 Operating pressure [bar]: 180 Max. heating temperature [°C]: 90/155 Connection power [kW]: 6.4 Cleaning agent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW PUMP HEAD NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to use servicing The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Condition: used, functionality: fully functional, INATEC slot die coating system, type 100050 500 Heated multi-nozzle coating head for continuous, web-width application of hot melt adhesive Iodjzt Ip Repfx Aiyebb onto web-shaped materials. The bar features a number of pneumatically controlled individual coating heads, which can be switched on individually or together. Electrical heating power 11 kW, operating voltage 230 V, protection rating IP 44. Adhesive supply via external pump/drum melter. Manufacturer: INATEC GmbH, Leverkusen. Identification No. 950672. Year of manufacture probably around 1995.

Condition: used, Zalkin type CA4 I 300 - serial no. 24361 Stelvin Lux cap 30 x 60 mm with cap feed 4 pcs. cap heads type VS 150, 250 litres cap feed with bars. Iedpjz A Dg Iofx Aiyobb

Condition: used, Year of construction: 2004, functionality: fully functional, The machine is used, but in good condition. It can be inspected while in operation. Iodpfx Aozp Ik Tjiyobb

Condition: used, mileage: 18,600 km, power: 130 kW (176.75 HP), first registration: 09/2025, fuel type: diesel, next inspection (TÜV): 09/2028, color: white, gearing type: automatic, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, second-hand vehicle warranty, soot filter, Citroën Spacetourer M for sale Identical model to Opel Zafira 9 seats Used as a school bus by a German bus company. Vehicle is from a German dealer and not a re-import. The vehicle will be sold with the existing wrap design (applied as a sticker) in its current condition. Easy to remove, even for non-professionals. The price is a fixed price. The vehicle is fitted with all-season tires. The price refers to 1 vehicle and not both. Mileage is almost identical. Special features: Seat configuration: 9-seater, fabric, Curitiba Black Additional features: Airbag, driver/passenger side, Audio system: MyCitroen Play, Exterior mirrors, electrically adjustable, heated, and foldable, Exterior mirrors painted, Floor covering, front (rubber), On-board computer, Parking assistance, rear, Automatic activation for headlights, Driving assistance system: Emergency braking assistant, Driving assistance system: Emergency call and assistance system (CITROEN Connect), Grip Control, Rubber floor mat, passenger/cargo area, Rear window, heated, Rear window wiper, Body/structure: Station wagon, Head airbag system, Head airbag system, rear, Steering column (steering wheel) mechanically adjustable in height/length, Model refinement, Engine 2.0 Ltr. - 130 kW Blue-HDI FAP, Parking brake, electric, Wheelbase 3275 mm, Tire repair kit, Low emissions according to emission standard Euro 6e, Sliding doors on both sides, SCR system (AdBlue technology), Side airbag, front, Rear and rear window tinted, Side protection strips, body color, Seat cover / upholstery: Fabric, Special paint: Ice White / Kaolin White, Sun visors with mirror (illuminated), Steel rims 7x17, Socket (12V connection) in the luggage compartment/cargo area, Socket (12V connection) in the center console, front, Stop-start system, Bumpers painted, Door handles, exterior painted, Underride protection , Rain sensor, Rear and rear window tinted Iodsz Dhi Ajpfx Aiyebb Net export possible.

Condition: used, Year of construction: 2013, machine/vehicle number: 320.002.13, functionality: fully functional, operating hours: 3,600 h, power: 12 kW (16.32 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,150 mm, workpiece height (max.): 100 mm, number of axes: 4, number of slots in tool magazine: 18, controller manufacturer: Felder, year of last overhaul: 2025, Equipment: CE marking, CNC machining center Profit H10 22.43 Year of manufacture: 2013 Operating hours: approx. 3600 h System: Matrix table made of phenolic resin Slotted table with two rows of stops Automatic central lubrication HARDWARE: Control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine frame: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Extraction: Central extraction via combined connections (D=250 mm) Software: Woodflash German (H20/H08/H10/H50) Travel range of the axes H10 22.43 X = 5230 mm Y = 2560 mm Z = 280 mm Working area: X = 4300 mm Y = 2160 mm Z = 105 mm Axis positioning speed: X = 100 m/min Y = 100 m/min Z = 30 m/min Ijdszwt Ndjpfx Aiyobb The machine will be in operation until calendar week 38 of 2026, after which it will be dismantled. In addition, 2 swivel heads for 5-axis machining can be purchased. These are not included in the quoted price and will be priced separately. The price applies ex works, including loading. Transport can be arranged and ordered separately. Assembly and installation assistance can also be offered as an option.