Used Weima Zmk 40 for sale (83)

Condition: ready for operation (used), 🔧 Key Specifications Cutting System: Four-shaft configuration with two cutting shafts and two clearing shafts. Fpodewnx Uiepfx Afpsi Cutting Disc Diameter: Approximately 280 mm (11 inches). Cutting Unit Dimensions: Working width of 1,000 mm and length of 700 mm. Hopper Opening: Approximately 1,400 mm x 1,600 mm. Motor Power: Typically equipped with two 18.5 kW motors. Operating Speed: Low-speed operation at around 25 rpm for high torque and reduced noise levels. Weight: Approximately 2,500 kg

Condition: new, Year of construction: 2026, Exceptional special price, as it was used at our in-house trade fair. Operating hours: 2 Immediately available – subject to prior sale. First come, first served. Compact design, high reliability, and excellent value for money: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foams, or paper. A special feature is the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Fjdpfelht H Esx Afpopi Throughput (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press Powerful pressing mechanism with wear-resistant, chrome-plated jaws Pre-compactor with end-position dampened cylinder and bolted cover Switchgear with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Tank with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Fpsdpfx Astnz Hbefpei Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: new, Year of construction: 2026, Compact design, high reliability, and excellent value for money: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foams, or paper. A special feature is the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30-40 Hydraulic oil capacity (l): 100 Weight (kg): 530 Equipment: Press Powerful pressing mechanism with wear-resistant, chrome-plated clamp Fpedpfxjbtnf Es Afpei Pre-compactor with end-position dampened cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Condition: used, Year of construction: 2018, total length: 2,400 mm, total height: 1,000 mm, total width: 1,200 mm, Colour: Red Empty weight: 1.000 kg - Year: 2018 - Documentation available: No - CE certificate present: No - Serial number: 600-797 - Main motor power [kW]: 22,2 - Rotation speed [rpm]: 1770 - Rotor width [mm]: 400 - Number of shafts [pcs.]: 2 - Opening width [mm]: 385 - Opening length [mm]: 93 - Sieve perforation [mm]: 20 - Number of fixed knives [pcs.]: 18 - Transport dimensions: 2400mm x 1200mm x 1000mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Fjdpfsy Tmu Uex Afpspi VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1992, functionality: fully functional, WEIMA TH 400 briquetting machine - after technical overhaul - Made in Germany - very good condition - year of manufacture 1992 TECHNICAL PARAMETERS: power of main engine 7.5 kW Fedpet U Et Njfx Afpepi machine output approx. 80 kg/h briquette diameter 50 mm feeding dimension 2000 x 1800 mm adder feeding the material to the piston stirrer machine overall dimensions (length / width / height) 240 / 190 / 200 cm weight ~ 850 kg TH hydraulic briquetting machines are compact equipment for briquette production. Briquetting machines can be filled manually or automatically directly into the hopper. The units of this series, by their small size and quiet operation, are ideal for setting up on the production floor. Characteristics: - reduction of production waste volume - low purchase costs - low energy consumption - compact design takes up little space - excellent processing quality - durable construction and long service life - trouble-free maintenance and low consumption - simple operation The main application scopes of briquetting presses are, for example: - in combination with a dust extraction or filtration and dedusting plant - for manual feeding of material - as a whole combined with a chipper (e.g. WEIMA WL4) - with a screw feeder or conveyor belt - with a mobile dust extraction system or combustion furnace

Condition: good (used), Year of construction: 1999, Chipper with inclined feed, suitable for roofers and carpenters, ideal for shredding roof battens with nails. Max. feed opening: 400 x 80 mm Fpodpsxlm Ntsfx Afpsi Slow speed: 250 rpm Motor: 18.5 kW Large rotor diameter Large knives 40 x 40 mm, set diagonally

Condition: excellent (used), Year of construction: 2018, Catalogue number 7974 TECHNICAL DATA - Infeed opening of widened hopper: 1500x1730mm - Discharge outlet for shredded wood: 200mm diameter - Rotor working width: 990mm - Main motor: 22kW - Pump motor: 0.75kW - Number of knives: 54 pcs - Knife dimensions: 40x40mm - Screen: 20mm - Hydraulic feed drawer - Electric auto-reverse Fedpfxezadxcs Afpspi - Dimensions (L/W/H): 2500x2200x2350mm - Weight: approx. 2000kg ADVANTAGES – German made - Pulse feed pusher - Halfway pusher - Fast/forward pusher – automatic feed drawer speed adjustment – Original DTR documentation + CE, year 2018 – Hydraulic feed drawer – Auger – screw conveyor for chip transport – Auto-reverse – Used chipper, in very good condition Net price: 115,900 PLN Net price: 27,600 EUR based on exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8038 TECHNICAL DATA - Inlet of the loading hopper: 800x600mm - Outlet for shredded wood: diameter 160mm - Working width of the rotor: 600mm - Main engine: 15kW - Pump engine: 0.75kW - Tank capacity: 0.4m3 - Number of blades: 14 pcs - Blade dimensions: 30x30mm - Screen: 15/10mm - Presser drawer Fjdjzkvb Aspfx Afpepi - Electric auto-reverse - Dimensions (length/width/height): 1800x1120x1760mm - Weight: 930kg ADVANTAGES - German production - Presser drawer - Auto-reverse - Used wood chipper, very good condition Net price: 31900 PLN Net price: 7595 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), CATALOG NO. 6907 TECHNICAL DATA - Top loading hopper inlet: 1980x1050mm - Bottom loading hopper inlet: 980x1050mm - Outlet for shredded wood: Ø210mm - Rotor working width: 980mm - Main motor: 30kW Fjdpszh Iq Defx Afpepi - Pump motor: 1.1kW - Number of knives: 36 pcs - Knife dimension: 40x40mm - Screen: 18mm - Pressure drawer - Electric autoreverse - Dimensions (L/W/H): 2100x2030x2070mm - Weight: approx. 3500kg – French made – Like WEIMA WL 10 – Fitted with new knives – Autoreverse – Pressure drawer – Very good condition – Used chipper Net price: 82,900 PLN Net price: 19,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant fluctuations in the exchange rate, the price may change)

Condition: excellent (used), Catalogue number 7672 TECHNICAL DATA - Loading hopper inlet: 1200x1000mm - Outlet for processed wood: diameter 160mm - Rotor working width: 980mm - Main motor: 18.5kW - Number of knives: 24 pcs - Knife size: 30x30mm - Screen: 20mm - Feed drawer - Electric auto-reverse - Dimensions (L/W/H): 2500x1700x1850mm - Weight: approx. 2500kg ADVANTAGES – Made in Germany – Auto-reverse – Feed drawer – Very good condition – Used chipper Fpsdpfx Afszh Imropoi Net price: 85,900 PLN Net price: 20,450 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7725 TECHNICAL DATA - Loading hopper inlet 1200x1000mm - Outlet for shredded wood ø 200mm - Rotor working width 980mm - Main motor 22kW - Number of knives 24 pcs Fpsdozh Il Ujpfx Afpsi - Knife dimensions 30x30mm - Screen 16/11mm - Feed drawer - Electric auto-reverse - Dimensions (L/W/H) 2600x2000x1720mm - Weight 2125kg ADVANTAGES – German production – Auto-reverse – Feed drawer – Very good condition – Used wood shredder Net price: 95,900 PLN Net price: 22,830 euro depending on exchange rate, 4.2 euro (Prices may vary in case of significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 6114 TECHNICAL DATA Fsdpfjzh H T Dox Afpepi - Loading hopper inlet: 800x1000mm - Rotor working width: 800mm - Pump motor: 0.75kW - Main motor: 15kW - Number of knives: 21 pcs - Knife dimensions: 30x30mm - Screen: 0.8x10mm - Pusher drawer - Electric auto-reverse - Discharge augers 2×1.1kW - Dimensions (L/W/H): 2460x1800x2250mm - Weight: 1660kg – German-made – Auto-reverse – Pusher drawer – Unpainted – Very good condition – Used shredder Net price: 59,900 PLN Net price: 14,260 EUR (depending on the exchange rate, 4.2 EUR) (Prices may vary in case of significant fluctuations)

Condition: excellent (used), Weima Hacker 20 hp with only 1935 operating hours, knives newly replaced. Fpodpfx Aszkvc Tsfpoi

Condition: used, Year of construction: 2011, WEIMA WL 6 S 30 kW – Single-Shaft Shredder For sale: WEIMA WL 6 S industrial single-shaft shredder with a 30 kW motor. A robust, German-made machine designed for continuous industrial operation. Main specifications: Motor power: 30 kW Rotor: Ø370 × 800 mm Rotor speed: 100 rpm 42 reversible cutting knives Hydraulic ram feeding system Interchangeable screens (10–60 mm) Weight: approx. 2,600 kg Fpjdpfx Afezhbdkopsi The machine is ideal for shredding wood, MDF and particle boards, plastics, paper, cardboard, and various types of production waste. The machine is available for inspection and test runs. Additional photos and a video of the machine in operation are available upon request.

Condition: used, Year of construction: 2011, WEIMA WL 6 S 30 kW – Single-Shaft Shredder For sale: WEIMA WL 6 S industrial single-shaft shredder with a 30 kW motor. A robust, German-made machine designed for continuous industrial operation. Main specifications: Fodpfx Afszhbbvspepi Motor power: 30 kW Rotor: Ø370 × 800 mm Rotor speed: 100 rpm 42 reversible cutting knives Hydraulic ram feeding system Interchangeable screens (10–60 mm) Weight: approx. 2,600 kg The machine is ideal for shredding wood, MDF and particle boards, plastics, paper, cardboard, and various types of production waste. The machine is available for inspection and test runs. Additional photos and a video of the machine in operation are available upon request.

Condition: used, Year of construction: 2011, WEIMA WL 6 S 30 kW – Single-Shaft Shredder For sale: WEIMA WL 6 S industrial single-shaft shredder with a 30 kW motor. A robust, German-made machine designed for continuous industrial operation. Main specifications: Motor power: 30 kW Fjdpfszha Syox Afpepi Rotor: Ø370 × 800 mm Rotor speed: 100 rpm 42 reversible cutting knives Hydraulic ram feeding system Interchangeable screens (10–60 mm) Weight: approx. 2,600 kg The machine is ideal for shredding wood, MDF and particle boards, plastics, paper, cardboard, and various types of production waste. The machine is available for inspection and test runs. Additional photos and a video of the machine in operation are available upon request.

Condition: excellent (used), Year of construction: 1997, Single shaft shredder form Weima Fpsdpoivpttsfx Afpsi Model -WL6S Main motor -22kw

Condition: used, machine/vehicle number: 13163, Rotor diameter: 368 mm Rotor width: 1000 mm Fpsdpfezhpz Rox Afpei Number of rotor blades: 52 Stator blades: 1 row Inlet cross-section: approx. 1000 x 1200 mm Drive motor: 37 kW

Condition: excellent (used), Weima WL6 wood chipper 18.5kW engine rotor length 800mm, Fjdpfjzkqnqex Afpspi 21 knives on the rotor, hydraulic hopper, automatic reverse function 15mm screen at the bottom and 20mm screen at the top Machine has undergone inspection, in very good condition Weight approximately 1500kg

Condition: used, Year of construction: 1998, total length: 2,100 mm, total height: 1,730 mm, total width: 1,700 mm, Colour: Red Empty weight: 1.500 kg Price: On request - Details: - └ Description: 400 volt recording 45 A Fuse 63A - Year: 1998 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 500-3752 - Main motor power [kW]: 18,5 - Rotation speed [rpm]: 90 - Hydraulic unit power [kW]: 0.8 - Oil tank capacity [L]: 20 - Rotor width [mm]: 800 - Number of shafts [pcs.]: 1 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 700 - Opening width [mm]: 800 - Opening length [mm]: 1000 - Sieve perforation [mm]: 20 - Number of rotating knives [pcs.]: 21 - Transport dimensions: 2100mm x 1700mm x 1730mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Fjdpfx Afozhtm Dspspi Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2001, operating hours: 13,602 h, total length: 2,200 mm, total height: 1,100 mm, total width: 1,550 mm, Colour: Red Empty weight: 1.200 kg Price: On request - Details: Fpodjzhr Tvspfx Afpsi - └ Description: 400 volt take-up 48A fuse 63A - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 600-229 - Operating hours: 13602 - Main motor power [kW]: 18,5 - Rotation speed [rpm]: 380 - Rotor width [mm]: 600 - Number of shafts [pcs.]: 2 - Opening width [mm]: 550 - Opening length [mm]: 50 - Sieve perforation [mm]: 20 - Number of rotating knives [pcs.]: 32 - Transport dimensions: 2200mm x 1550mm x 1100mm (l x w x h) - Transport weight [kg]: 1200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2026, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Storage location: Supplier Fedpfx Aey D E U Iefpjpi

Condition: used, Year of construction: 2026, Special Price - Showroom Machine Garbsen Our Machine Concept WL 6 The Weima High-Performance - Shredders with their flexible application possibilities can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) into fuel chips, achieving enormous volume reduction of material for bulky items. Functionality: The machine is equipped with a large feed hopper and can be fed with a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher supplies the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependently controlled. The internal pusher guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended in a cardanic way to avoid lateral forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concavely ground, aggressive, and 4-times reversible knives / cutting crowns are located in milled knife pockets on special knife holders; this patented system guarantees high throughput performance, low energy consumption, and optimum discharge of shredded material by reducing the cutting gap between counter knife and rotor for the first time. The screen located under the rotor determines chip size (10 - 100 mm ). A hydraulically opening screen basket is available upon request. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Precise cut at high throughput with profiled V-rotor The specially developed by WEIMA V-rotor can be used universally and is made from solid material. Its aggressive material intake with up to two rows of knives guarantees high throughput with low power requirements. It can be equipped with hardened steel cutting knives with edge lengths of 30 mm and 40 mm. These can be turned several times in case of wear, which drastically reduces maintenance costs. Intuitive operation via Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. We use only high-quality components – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the pusher stroke or stop ensure high throughput. The built-in overload protection also prevents defects on the machine. Technical Specification WL 6Feed opening 800 x 1,250 mmHopper capacity 0.9 m³Rotor length 800 mmRotor diameter 256 mmDrive power 22 kWRotor speed 90 rpmMax. number of knives 42 piecesKnife type and size concave / 40 x 40 mm, cutting crownsScreen perforation 10-60 mmPaint finish WEIMA Standard RAL 2022 / 7016Connection value 400 V +/- 5% / 50 HzWeight approx. 1,600 kgIncluding: - Control cabinet* (Rittal) incl. electrical control (Moeller/Siemens) and S Fpjdsy D E Tdspfx Afpji

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, total length: 4,500 mm, total width: 3,375 mm, WEIMA Crusher Series HWV 3000 (37 kW) and the Single-Shaft Shredder WL12 (30 kW) Ideal for pre-shredding wood waste such as pallets, followed by metal separation and secondary shredding. Advantages: Two-stage process: Pre- and post-shredding for maximum efficiency. Versatile use: Wood chips for heating systems or briquetting presses. Low-noise operation Technical details – HWV 3000: - Power: 37 kW - Dimensions (hopper): 3375 mm width x 1630 mm height - Cutting knives: 58 knives in two rows Technical details – WL12/30: - Power: 30 kW - Shaft diameter: 368 mm - Screen: 15/20 mm Fpsdpey Ubvpofx Afpoi Applications - Wood waste processing and recycling - Energy generation through wood chips or briquetting