Used Welded Beam for sale (9,241)

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine Njdpfey Au Eyex Akfocr -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Condition: used, Year of construction: 2015, 2015 Cloos GLW 270 CNC Welder and Plasma Cutter with Robot Nsdpfxjy Dr Iho Akfocr CNC Control: Qirox C QRC 350, Welding source: Cloos Qineo Pulse 450, TIG Welding source: Cloos GLW 270, Plasma: Hypertherm HPR260XD, Basic parameters: diameter of processed ends from 500 to 5000 mm, end weight up to 5000 kg, diameter of processed pipes up to 1000 mm, length of processed pipes up to 3000 mm, pipe weight up to 500 kg, maximum cutting current of the plasma generator 230 A, maximum TIG welding current 270 A, maximum MAG welding current 450 A, Robotic station functionality: plasma cutting and chamfering of holes in bottoms with diameters ranging from 500 to 5000 mm, plasma cutting and chamfering of holes in shells with diameters ranging from 500 to 5000 mm (shell axis vertical), including at an angle to the vertical axis of the bottom, plasma cutting and chamfering of nozzles with a diameter of up to 1000 mm, welding of nozzles in bottoms with guaranteed penetration layers. The condition for obtaining proper penetration welds is proper preparation and assembly of the part – e.g., lack of end ovality (faulty material), even gap (incorrect assembly), etc. In the case of densely packed nozzles in the bottom, welds may be impossible due to lack of access with the welding torch. - welding of nozzles in shells, welding of tubes in tube sheets with diameters ranging from 500 to 5000 mm. The tubes in the tube sheets should be repeatedly secured and expanded. When welding tubes in tube sheets with diameters greater than 3000 mm, it will be necessary to rotate the tank several times. TIG process, MAG process, Maximum bottom thickness: 20 mm, Maximum jacket thickness: 12 mm, Station equipped with a filtration system, Station equipped with an automatic torch change system, Station equipped with a system enabling automatic joint position recognition, Station equipped with a vision system enabling process monitoring on a separate monitor with the option of connecting a plant recorder, Welding parameter recording and reading system, Manifold with a solenoid valve for shielding gas in the rotary table, Self-centering chuck in the 500-5000 range for the rotary table, Self-centering chuck for a vertical rotary table up to Ø600, S/No: 163 (2015)

Condition: ready for operation (used), Resistance Welding Machine, Resistance Welder, Meritus RAS 150 VSH, Used Machine Manufacturer: Meritus Type: RAS150VSH, MPW-RW 811-1410 Overall dimensions: 900 x 1370 x 2450 mm Electrical data: 415 V; 150 kVA; 50 Hz Ncedpfxsrdf Acs Akfjr Equipped with light gate Tool water cooling

Condition: used, Year of construction: 2002, Equipment: documentation/manual, Technical data in the attachment. Robot including workpiece positioner and welding technology. Nodpfey Emz Ssx Akfjcr

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Nsdpfxoyqr Sxo Akfscr

Condition: new, Year of construction: 2025, 99% filtration efficiency – removes smoke, vapors, and fine metal dust. Ncodpfxjyi Utvj Akfsr Automatic filter cleaning – the impulse system maintains full performance without requiring frequent maintenance. High extraction capacity – up to 3000 m³/h – effectively eliminates contaminants without compromising visibility of the work area. Quiet operation (≤78 dB) – enables comfortable use in confined spaces. Integrated work table – ergonomic work surface with lower and rear extraction. Sturdy steel construction – resistant to vibration and intensive use. Mobile – equipped with locking transport wheels, easy to move. Safe operation – protection against overheating and particle ignition. Power supply: 380 V / 50 Hz Motor power: 3.0 kW Air flow: 2500–3000 m³/h Operating pressure: 2600–3050 Pa Filtration efficiency: 99% Filters: 2 × polyester cartridges Filter cleaning: Pneumatic, pulse (backflush) Dust container capacity: 50 l Noise level: ≤78 dB(A) Device dimensions: 1500 × 1200 × 1600 mm Table work surface: 1500 × 700 × 750 mm Weight: approx. 200 kg

Condition: excellent (used), Manufacturer: REHM Model: Synergic. PRO 2 350-4 Machine condition: Very good used condition ///// Price listed is for 1 unit ///// Welding current adjustment range: 45A/16V - 450A/36.5V Weight: approx. 130kg SMC Technology – Smart Machine Control A unique step-regulated control concept developed by Rehm: The arc length is regulated not only by measuring voltage and welding current, but also by the digital determination of wire feed speed. This enables excellent welding results while keeping operation easy and safe. - SDI – Stepless Dynamic Induction The continuously adjustable coil automatically ensures exceptional arc ignition properties and high arc stability during welding. Fine-tuning can be performed manually using the SDI knob. This allows adjustment of heat input, which can positively influence the amount of post-weld work required. - RSC – Realtime Speer Control Digital monitoring and regulation of the wire feed speed with high precision and in real time. With the use of RSC, changes in arc length are compensated for more quickly and efficiently. - CCM – Characteristic Curie Memory Built-in database of expert welding parameters. By selecting the wire type, diameter, and desired welding voltage, the system synergistically sets the optimal preset welding parameters. During operation, actual parameter values are constantly compared to the preset values, and automatically adjusted as needed. - RMI – Rehm Machine Interface Ncodpfxjv Nrfxj Akfsr The machine’s control panel is extremely user-friendly and ensures error-free selection. Simple parameter selection makes the operator’s job easier, helping to minimize mistakes and reduce setup time.

Condition: new, table length 1000 mm table width 1000 mm table height 100 mm Nsdpfsyzty Hjx Akfecr bore 16 mm weight 200 kg Special offer: Exhibition use – slight scratches on the surface Features: - Surface holes in a 50x50 mm grid - Holes in the side panels in a diagonal grid - 4 feet – standard configuration 750 mm - Through-hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 – 13 mm - Side panel made of high-quality steel S355J2+N + plasma nitriding - Hole Ø 16 mm - Corners, edges and holes rounded - Side panel height 100 mm - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise set-ups

Condition: used, mileage: 50,820 km, power: 294 kW (399.73 HP), first registration: 09/2022, overall weight: 18,000 kg, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 07/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Steering arrangement RIGHT, operating hours: 2033 ASR, BrakeMatic, unison horn, ESS, EBA2, BT FSE, RIO Box, MAN Tronic, Radio MAN Media Truck 7- color display and navigation, LGS IV, two engine variant with built-in engine JCB 129 kW level 3b, front disc brush - sideways shiftable, double-sided sweepings pickup, HD washing system 200 bar, hydraulic suction hose boom at the rear, gross volume 9 m³, water system approx. 4320 liters, weed brush preparation, container 9 m³ volume, built-in engine JCB 129kW/level 3b, feeder brush fixed 5 x 1300mm, total water volume 4320 liters, fuel tank 350-400 liters, coated suction nozzles double-sided, 15m hose reel, 200 bar 106l/min, rear area observation, rear suction hose Njdpfjt Hcfgex Akfscr

Condition: like new (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, arm reach: 1,437 mm, For sale: Panasonic robotic TIG welding workstation purchased from ValkWelding. Workstation includes: Panasonic TM 1400 G3 robot (6 axes, reach 1437 mm, payload 6 kg), two-axis L positioner PD1000/500, TIG welding unit Tetrix 352 AC/DC Synergic CW, accessories, and safety equipment. Nsdpfxey Efmgj Akfecr This workstation is distinguished by its ability to safely weld not only steels and stainless steels but also aluminum. The process is highly synchronized with wire feeding and is capable of seam tracking and adapting to changes in arc height. A very versatile device. I am selling this system because our original capacity expectations have not been met (we don’t have work in the hundreds or thousands of pieces). Over its entire lifetime (approximately 5 years), the workstation was powered on for around 200 hours and did actual test welding for less than an hour in total. It is practically in like-new condition. It would be a pity for it to just “collect dust.” All support has been directly provided by ValkWelding. In case of sale, they will arrange installation, commissioning, and personnel training as agreed.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 3,310 h, load capacity: 4,000 kg, lifting height: 4,100 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, motor manufacturer: KUBOTA V2403-T, gearing type: hydrostat, fork carriage width: 4,000 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,100 kg, empty load weight: 6,100 kg, total height: 2,400 mm, total length: 2,300 mm, total width: 2,300 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🔶 COMBILIFT C4000 – 2017 – 3310 HOURS – DIESEL – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for operation. No compromises. This COMBILIFT C4000 is not just a machine — it is a guarantee that your logistics will run smoothly, reliably, and without downtime. Designed for demanding working environments and fully serviced both technically and visually, the truck presents itself as new and is ready for immediate use. 📌 Key technical specifications: 📅 Year of manufacture: 2017 ⏱️ Operating hours: 3310 🔥 Drive: Diesel 💪 Lifting capacity: 4000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1320 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Superelastic (100%) 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2400 mm | Length 2300 mm | Width 2300 mm 🏗️ Overall height: 2800 mm 🛞 Tyres: SE – Front 200/50-10 | Rear 27x10-12 📦 Ideal for: 📚 Narrow-aisle warehouses 🪵 Wood, steel, and pipe industry Nsdpfey Axcpsx Akfscr 📏 Handling long loads 🏭 Indoor and outdoor use FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,672 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,900 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 4,000 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 355X65-15, overall weight: 9,800 kg, empty load weight: 6,800 kg, total height: 2,550 mm, total length: 2,100 mm, total width: 2,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, pallet forks, sideshift, 🔶 COMBILIFT C3000XL – 2011 – 5672 HOURS – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS Ncsdey Ar Ncjpfx Akfjr ✔️ Ready for operation. No compromises. This COMBILIFT C3000XL is not just a machine — it is a guarantee that your logistics will proceed smoothly, reliably, and without interruption. Designed for demanding applications and fully reconditioned both technically and visually, the forklift presents as new and is ready for immediate use. 📌 Key Technical Data: 📅 Year of manufacture: 2011 ⏱️ Operating hours: 5672 🔥 Drive: LPG 💪 Load capacity: 3000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1340 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Super elastic (100%) 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2550 mm | Length 2100 mm | Width 2300 mm 📦 Overall height: 2900 mm 🛞 Tyres: SE – Front 23x10-12 | Rear 355x65-15 🏗️ Free lift: 2000 mm 📦 Perfect for: 📚 Narrow aisle warehouses 🪵 Steel, timber and pipe industries 📏 Handling long loads 🏭 Indoor and outdoor operations FT LOGISTICS – Quality you can rely on. Service you can trust.

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA Nedeykvdlepfx Akfecr - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: excellent (used), Year of construction: 2011, operating hours: 1,000 h, functionality: fully functional, overall weight: 300 kg, load capacity: 500 kg, arm reach: 3,000 mm, pivoting range: 270 °, controller manufacturer: Tawers, teach pendant manufacturer: Panasonic, control cabinet width: 600 mm, control cabinet height: 2,000 mm, input voltage: 220 V, input current: 22 A, type of input current: three-phase, Equipment: documentation/manual, type plate available, Panasonic industrial welding robot. Model: YA-1 TAR81 Axes: 6 Maximum payload: 8 kg Weight: 204 kg Maximum reach: 1796 mm Ncedpfoyzn D Hsx Akfor Welding rotators Year of manufacture: 2011 Country of manufacture: Japan Very good functional condition.

Condition: used, Year of construction: 1997, Beam planer 260 x 160 mm, trailing chamfer unit on the upper spindle, air cushion table with two-axis control for left and upper spindle, factory-new control system (latest Weinig version) Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW (shared motor with left spindle) 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Height adjustment of upper spindle: electric Optionally with/without feed Feed brake system: Yes Feed speed infinitely variable up to: 3 – 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. planing depth: 10 mm Jointing cutter on jointer: Yes Powered rollers in table: 1 Control type: PLC control Spindle position display: mechanical numerical display Infeed rollers before jointer: Yes Air cushion table: triple track Central lubrication point: Yes Description: short infeed table 1050 mm with internal lighting Nodpfx Akewwwkhjfjcr Location: Nattheim

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Manufacturer: Dalex, 2 coupled spot welding machines, with storage table -Type: SL 25/EA -Rated power: 25 kVA each Ncjdpfx Akjyz Rd Asfsr -Projection: 600 mm -Intermediate dimension: up to 1590 mm -Operation: via foot pedal -Individual components: see photos -Dimensions: Machine 2140/1160/H1220 mm / Table 1565/1075/1140 mm -Weight: 535 kg / 112 kg

Condition: good (used), suction capacity: 3,300 m³/h, negative pressure: 2,000 Pa, Dust extraction, welding fume extractor, self-cleaning filter, cartridge filter for plasma, laser, sandblasting, shotblasting The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: DUST HOG / UAS Model: SBS-4-2 SD Engine power 4 Kw Fan in sound-absorbing housing Capacity 3300 m3/h Vacuum - 2000 Pa Nsdpfx Aeunh Uvjkfjcr Filtration area - 112m2 Inlet diameter - 300 mm Cartridge filter cartridges - 4 pieces. Height - 3.90 m depth - 1.70m width - 1.25m

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 246393272, input voltage: 230 V, pneumatic connection: 10 bar, Description: For sale is a Dürkopp Adler 745-35 F Premium programmable pocket welting industrial sewing unit, offered as a complete automated workstation. This system is designed for high-precision, repeatable sewing operations such as pocket setting and garment component processing. It features an advanced programmable control system, automated clamping and positioning, and integrated material handling. The machine enables consistent production quality and efficient workflow in demanding industrial environments. The unit has been used in a professional garment factory and was operational prior to factory shutdown. The machine has been serviced and maintained, with the latest maintenance completed on 27.2.2026. Original purchase price approximately €38,000. Includes: • Dürkopp Adler 745-35 Premium sewing unit • Integrated electronic control panel • Automated clamping and positioning system • Conveyor / transfer unit • Pneumatic system and air regulation components • Complete industrial workstation table and frame • Foot pedal controls • Material supports and guides Technical details: • Manufacturer: Dürkopp Adler AG • Model: 745-35 F • Type: Programmable automated sewing unit • Voltage: 1 x 190–230 V • Frequency: 50/60 Hz • Pneumatic system required Condition: Nodpfx Akey Agrljfecr Used industrial condition. Operational prior to factory shutdown. Serviced and maintained, latest maintenance 27.2.2026. Inspection possible prior to dismantling. Typical applications: • Automated pocket setting (jeans, trousers) • Reinforcement operations • Repetitive precision sewing • Industrial garment manufacturing Sales terms: This equipment is sold due to factory closure and is being liquidated directly from production use. Sold as-is, where-is. Buyer is responsible for ensuring suitability for their own materials and production. No claims accepted after sale. Removal & transport: Buyer responsible for dismantling and transport. Loading assistance available, but performed at buyer’s risk and cost. Video from working situation was taken on 5.3.2026. Ask for video.

Condition: used, Dalex Works Ncodpfx Asg Rcpxokfsr Pms 10-2 380V 50Hz rated power at 50 duty cycle: 63 kVA secondary short circuit current: 45 kA rated primary voltage 380 V - 50 Hz open circuit voltage of 5,6 V electrode force: 65-390 daN Machine weight 341 kg

Condition: good (used), Year of construction: 2010, MIG MAG inert gas welding machine Esseti Query 500 c with removable wire feed case 60 % 500 AH Ncodpfet Iq Edex Akfor 100 % 380 AH Torch MB 501 4 meter incl. pressure reducer

Condition: used, MIG MAg welding machine Unistep 320 with removable wire feed case with torch MB 401 incl. pressure reducer Nsdpfx Aot Iq E Rskfscr

Condition: excellent (used), Year of construction: 1995, Various scribing and straightening plates, different sizes: 2000x7000x300 mm 1500x3000x205 mm 1500x3000x255 mm 2000x4000x100 mm 2000x4000x150 mm 2320x4675x460 mm 2400x4000x400 mm 2000x3000x300 mm 1500x3005x260 mm 2000x7000x300 mm Nodpfx Aksyh A Aaofjcr 150x6000x210 mm 1500x3000x200 mm 1500x3000x200 mm 1500x3010x200 mm 1000x2000x150 mm Available individually.

Year of construction: 1970, condition: used, Spot welding machine Make Dalex type SF 16 Continuous power 16 KVA at 50 % ED Njdpfjk Tt Hfox Akfscr

Condition: good (used), Year of construction: 2003, machine/vehicle number: 18220203, System for automated robot welding Mains voltage:3 x 400 V Mains voltage tolerance:+ /- 15 Mains frequency:50 / 60 Hz Mains fuse protection:35 A slow-blow Primary continuous current:18 - 29.5 A - 100 duty cycle Primary continuous power:13.1 kVA Power factor:0.99 Efficiency:0.9 Welding current range:MIG/MAG: 3-500 A Rod Electrode: 10-500 A TIG: 3-500 A Welding current:40 duty cycle: 500 A 60 duty cycle: 450 A 100 duty cycle: 360 A Welding voltage range:MIG/MAG: 14.2 - 39.0 V Rod electrode: 20.4 - 40.0 V TIG: 10.1 - 30.0 V Max. Welding voltage:49.2 V Open circuit voltage (OCV):70 V Dimensions (mm) H x W x D:626 x 287 x 477 mm Weights:35.6 kg Included in the scope of delivery: Power source on steel platform (RS 422 interface) Cooling unit (FK 4000-R) Fronius VR 1500 4R/W/E robot wire feed case Supply voltage 55 V DC Rated current 4 A Wire diameter 0.8 - 1.6 mm 0.03 - 0.06 in. Wire speed 0.5 - 22 m/min 19.69 - 866.14 ipm. Torque 4 Nm Protection class IP 21 Dimensions I x w x h 405 x 208 x 205 mm 15.94 x 8.19 x 8.07 in. Weight 7 kg 15.43 Ib. Drive 4 roller drive Maximum shielding gas pressure 7 bar 101 psi. Coolant Original Fronius coolant Maximum coolant pressure 6 bar 87 psi. Welding torch Robacta Drive W/E/6.25m Hose package 6.5m Various wearing parts (e.g. pipe bends, gas nozzle, contact pieces) Ncjdjqpgntopfx Akfer Suction unit with hose guide

Condition: good (used), Year of construction: 1980, TIG welding machine Messer Griesheim GW 200 DC 400 Volt Ncedpfetd Hhdsx Akfjr