Used Welded Beam for sale (9,688)

Condition: new, neu ca. 2 Wochen ab Auftragse 3165 € 28 mm Cpjdpfx Asyq Sq Iogksw Accessory set consisting of: 8 pcs. screw clamp 180° HIS28Z3000 4 pcs. screw clamp 45° HIS28Z3045 4 pcs. V-support HIS28VP100 20 pcs. quick clamping bolt short HIS28SB100 4 pcs. connnection bolt HIS28BS100 2 pcs. manetic bolt HIS28MB100 4 pcs. stop rail 150mm HIS28FA150 6 pcs. stop rail 225mm HIS28FA225 4 pcs. stop angle 175mm HIS28WA175 2 pcs. stop angle 275mm HIS28WA175275 1 pc. stop angle HIS28WA325L 1 pc. stop angle HIS28WA325R 1 pc. support angle 800 HIS28W800L 1 pc. support angle 800 HIS28W800R 1 pc. cleaning brush Nylon HIS28RB 1 pc. torch holder HIS28BH and 1 care set (consisting of 1 pc. HIS-Cleaner-1L and HIS-Premium-1L) OPTION: Tool cart HIS28WW1000 € 545,--

Condition: new, neu ca. 6-8 Wochen ab Auftrag 10265 € 197.09 € 4000 x 2000 mm 850 mm 8000 kg 2340 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. Cpodpfx Ajyq Sqzsgkjw - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2590 € 16 mm The set for everyday and universal use with an extensive range of clamps, brackets and clamping options. Including tool trolley for an optimised and fast workflow. Consisting of: 10 screw clamps 180° HIS16Z3000 4 screw clamps 45° HIS16Z3045 4 V-support HIS16VP100 8 stop brackets 90x37, 5mm HIS16WA9037 8 pieces stop bracket 90x90mm HIS16WA9090 2 pieces stop bracket 300mm HIS16WA300 1 piece stop bracket 500mm HIS16WA500L 1 piece stop bracket 500mm HIS16WA500R 4 pieces stop bar 75mm HIS16FA075 8 pieces stop bar 115mm HIS16FA115 28 pieces quick clamping bolt short HIS16SB100 1 piece cleaning brush HIS16RB 1 piece torch holder HIS16BH Cpedpfxoyq Sqho Agksw 1 piece cleaner HIS- Cleaner-1L 1 piece Anti-stick agent HIS-Premium-1L

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 1725 € 16 mm The extended entry level with added value in the set configuration for the most common work steps and applications. Consisting of: Codpfx Agsyq Sqbjkopw 8 screw clamps 180° HIS16Z3000 2 screw clamps 45° HIS16Z3045 2 V-support HIS16VP100 4 stop brackets 90x37, 5mm HIS16WA9037 6 pieces stop bracket 90x90mm HIS16WA9090 2 pieces stop bracket 300mm HIS16WA300 2 pieces stop bar 75mm HIS16FA075 8 pieces stop bar 115mm HIS16FA115 20 pieces quick clamping bolt short HIS16SB100 1 piece cleaning brush HIS16RB 1 piece torch holder HIS16BH 1 piece cleaner HIS-Cleaner-1L 1 piece anti-adhesive agent HIS-Premium-1L OPTION: Tool trolley HIS16WW1000 € 449,--

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 929 € 16 mm Starter set for anyone who wants to work professionally and efficiently contains the most important tools as basic equipment. Cpedpfx Asyq Sp Rsgkjw Consisting of: 4 pieces screw clamp 180° HIS16Z3000 4 pieces stop bracket 90x37.5mm HIS16WA9037 4 pieces stop bracket 90x90mm HIS16WA9090 4 pieces stop bar 115mm HIS16FA11512 pieces quick clamping bolt short HIS16SB100 1 piece cleaning brush HIS16RB 1 piece torch holder HIS16BH 1 piece cleaner HIS-Cleaner-1L 1 piece anti-adhesive agent HIS-Premium-1L OPTION: Tool trolley HIS16WW1000 € 449,--

Condition: used, gebraucht 2468D prompt, Zwischenverkauf v Deutschland 2970 € 1 1890 € 195 kg 28 mm DEMO SET / MINT CONDITION consisting of: * 1x accessories car (Delivery is galvanised) * 4x angle stop 350 x 20 mm * 4x adjustable angle stop 250 x 20 mm Cedpfxoyq Spqo Agkopw * 15x Adjustment clamp * 4x Multi-clamp * 6x Stand angle, adjustable 175 x 20 mm * 2x Stand angle, adjustable 225 x 21 mm * 8x Stop rail 225 x 20 mm * 10x Socket bolt * 15x Plug holder * 3x Ball Tension Bolt * 4x Claw clamping bolt 28 x 100 mm * 15x Spacer ring

Condition: used, suction capacity: 1,600 m³/h, negative pressure: 2,800 Pa, Mobile station welding fume extractor, dust extractor , filter ESTA SRF K-15 FM Fan of 2.2 Kw (three-phase) located on the clean side Cjdpfotpui Isx Agkspw Extraction arm with a range of 3 m Capacity 1600 m3/h Vacuum pressure 2800 Pa Possibility to connect a second extraction arm( inlet 2 x 140mm) SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust contaminants. Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge. During welding, the device does not need to be connected to the compressed air network and thus remains mobile.

Condition: used, Year of construction: 2015, Type: LBS043 / 80 / 1.5 Coil joining machine. With Fronius Trans Tig 2200 Job G/F Arc welding machine. Pneumatic clamping. Csdpjlddxhjfx Agkopw Siemens HMI touch screen control. Year of manufacture: 2015. Coil/strip width up to 80 mm. Used machine in working condition. Strip width: 15 – 80 mm. Strip thickness: 0.5 – 1.5 mm. Power: 400 V / 50 Hz. Shears on the right not included. Including operating instructions in German, schematics and packing. Delivery from stock. On stock more used machines made by Ideal, Bruderer, Schaal, Mabu, Bihler...

Year of construction: 2026, condition: new, functionality: fully functional, AVANTECHNO 411 is a professional mobile system for line boring and internal build-up welding, designed for precision restoration of worn cylindrical bores and pivots directly on site. The system integrates boring, internal welding (overlaying), facing, drilling, and thread cutting into a single portable unit. The equipment is mounted directly onto the workpiece, allowing on-site repair without the need for disassembly or transportation of heavy components. The coaxial centering system ensures high concentricity when restoring spaced bores. Technical specifications: - Boring diameter range: Ø 22 – 400 mm (up to 1,000 mm with additional kits) - Internal build-up welding range: Ø 25 – 400 mm - External build-up welding range: Ø 20 – 250 mm - Accuracy: up to 0.01 mm (H7 tolerance field) - Feed rate: 0 – 0.5 mm/rev - Maximum spindle speed: up to 450 rpm - Continuous feed travel: 250 mm (extendable via bar length) - Drive type: DC motor with permanent magnets - Power supply: 220 V / 50 Hz - Maximum power consumption: 3 kW - Operating temperature range: −30°C to +40°C - Weight of electromechanical module: approximately 42 kg Functional capabilities: - Single-pass coaxial restoration of multiple aligned bores - Internal hole welding with continuous spiral overlay technology - Facing of flanges and mounting surfaces - Restoration of bearing seats and circlip ring grooves - Restoration of blind bores - Quick change of boring bar with welding shaft without the need for re-centering Applications: Suitable for maintenance and repair of: - Excavators, loaders, and construction equipment Cpsdpfx Agjyq Rldekew - Mining machinery and processing equipment - Agricultural machinery - Cranes and lifting equipment - Industrial and heavy mechanical assemblies Advantages: - On-site repair without disassembly - Significant reduction of downtime and transport costs - Compact and portable design - Manufactured in the EU with a 24-month warranty - Engineered for heavy-duty industrial applications

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: DC, input voltage: 220 V, overall weight: 50 kg, warranty duration: 24 months, AVANTECHNO 611 is a heavy-duty mobile line boring and internal welding system, designed for precise on-site restoration of worn cylindrical bores and pivot joints. The machine combines boring, internal welding, facing, drilling, and thread cutting in a single portable unit. It mounts directly onto the workpiece, allowing repairs without dismantling heavy components, while maintaining precise coaxial alignment of multiple bores. Technical specifications: - Boring diameter range: Ø 62 – 600 mm (Ø 32 – 1,000 mm with additional kits) - Internal welding range: Ø 350 – 1,000 mm - Accuracy: up to 0.01 mm (H7 tolerance) - Feed rate: 0 – 0.5 mm/rev - Maximum bar rotation speed: up to 300 rpm - Continuous feed travel: 300 mm (extendable) - Drive type: DC motor with permanent magnets - Power supply: 220 V / 50 Hz - Maximum power consumption: 2.5 kW - Weight of electromechanical unit: approximately 50 kg Applications Suitable for repairing: - Excavators and construction machinery - Mining and industrial equipment - Agricultural machinery - Cranes and lifting equipment - Heavy-duty mechanical assemblies Advantages: - On-site repair without disassembly - Reduced downtime and transport costs Cedpsyq Rivsfx Agkspw - Portable and robust construction - Manufactured in the EU with a 24-month warranty - Designed for heavy industrial applications

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Cpodpoyqr Sxjfx Agkjw

Condition: used, Year of construction: 2009, suction capacity: 16,000 m³/h, negative pressure: 2,500 Pa, Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side, which reduces the risk of explosion to a minimum. Cpsdpfx Aork Itcjgkjw 15 Kw fan Capacity 16000 m3/h Vacuum 2500 Pa Filter cartridges - 13 pieces. Filtration area 260m2 Inlet diameter - 2x 560 mm Year of production - 2009 Dimensions of the device: height - 2.70m width - 5.70m x 1.85m weight - 2600kg

Condition: excellent (used), Year of construction: 2012, Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. The device is equipped with a pre-separator and a mechanical spark trap. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: Donaldson Torit Model: DFPRO 12-CYCLO Year of production - 2012 Donaldson Torit Ultra WEB patron filter cartridges - 12 pcs. Filtration area of 215 m2 18.5 Kw fans. Cjdpfxjiypxie Agkjpw Capacity 11000 m3/h Vacuum 3900 Pa Inlet diameter - 500 mm We also offer on request new filter cartridges tailored according to the purpose of the device. Dimensions: height - 5.00 m length. - 3.50 m width - 1.70 m weight - 2200 kg

Condition: used, Year of construction: 1997, Beam planer 260 x 160 mm, trailing chamfer unit on the upper spindle, air cushion table with two-axis control for left and upper spindle, factory-new control system (latest Weinig version) Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW (shared motor with left spindle) 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Height adjustment of upper spindle: electric Optionally with/without feed Feed brake system: Yes Feed speed infinitely variable up to: 3 – 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. planing depth: 10 mm Jointing cutter on jointer: Yes Powered rollers in table: 1 Control type: PLC control Spindle position display: mechanical numerical display Infeed rollers before jointer: Yes Air cushion table: triple track Central lubrication point: Yes Description: short infeed table 1050 mm with internal lighting Cedpfx Agewwwkhskepw Location: Nattheim

Condition: ready for operation (used), Year of construction: 2013, This CLOOS QRH 390 was manufactured in 2013. It features a QRH 390 with a QIROX Controller V6 and a C-stand MH=24330. Equipped with advanced welding technology and an extraction system, this welding robot is ideal for enhancing your production capabilities. Contact us for more information about this machine. Application Types Welding Cedpfx Asx S Siusgkjpw

Year of construction: 1993, condition: ready for operation (used), This Hollinger MSE-II-EP-SB-300-450 was manufactured in 1993. It is part of a comprehensive line that includes various welding and cutting machines, enhancing versatility and productivity in operations. Ideal for those looking to get high-quality welding capabilities, consider the Hollinger MSE-II-EP-SB-300-450 machine we have for sale. Contact us for more information about this machine. Cpodpfx Ajx Nr Ncsgkew Application Types Welding

Condition: ready for operation (used), Year of construction: 2019, Main Drive Max payload 15 kg Media Power consumption 36 kVA This CLOOS QIROX QRC 350-E was manufactured in 2019. It features a maximum payload of 15 kg and a working range up to 4500 mm. Equipped with a QC 2 Master control system, it includes a handheld programming device with an 8.4" touchscreen. The robot supports expansion up to 12 axes and comes with integrated welding software and a digital interface. Consider the opportunity to buy this CLOOS QIROX QRC 350-E welding robot. Contact us for more information about this machine. Cpsdpfxsx D Hdhj Agksw Application Types Welding

Condition: used, Year of construction: 2008, type of input current: three-phase, filter area: 10 m², suction capacity: 1,000 m³/h, negative pressure: 3,000 Pa, arm reach: 3,000 mm, Mobile welding fume extractor, dust extraction unit, self-cleaning filter, pneumatic, vacuum type KEMPER. Suitable for welding, grinding, and all types of dry dust. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high efficiency of the device. Model: Filter-master XL Fan power: 1.5 kW Airflow: 1000 m3/h Vacuum: 3000 Pa Cedpfx Ajymkq Sjgkjpw Cartridge filter element. Stock no.: 1110

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, WE Flexmaster 400 laser welding machine Year of manufacture: 2010 Laser unit TruDisk 3302, Trumpf company Cooling unit P805-17640, Termotek company Material: black sheet metal and stainless steel sheet Cpedpfxov Ipcfs Agkew Sheet thickness: 0.6 - 2.0 mm Pipe diameter: 80 - 600 mm Pipe length: 100 - 1250 mm

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Cpodpjt Awm Defx Agkjw Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Condition: ready for operation (used), Year of construction: 2008, number of axes: 6, This 6-axis PANASONIC TA-1800WG Welding Robot was manufactured in 2008. It includes a 350A welding source, a VWP 316/351/95-3 welding gun, a BRG 2000 mechanical cleaner, an 800mm plinth, and a 750 H-manipulator. If you are looking to get high-quality welding capabilities, consider the PANASONIC TA-1800WG machine we have for sale. Contact us for more information. • 6-axis welding robot Additional equipment Cpedpfx Ajyfd N Ejgkjw • Welding source: 350A (SP-Mag / Hyper Dippulse) • Welding gun: VWP 316/351/95-3 • Mechanical cleaner: BRG 2000 • Plinth: TA, H=800 mm • H-manipulator: 750

Condition: used, Year of construction: 1987, volume capacity / length / mm height / mm Cpedpfx Agjyrt A Uskow

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 3,310 h, load capacity: 4,000 kg, lifting height: 4,100 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, motor manufacturer: KUBOTA V2403-T, gearing type: hydrostat, fork carriage width: 4,000 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,100 kg, empty load weight: 6,100 kg, total height: 2,400 mm, total length: 2,300 mm, total width: 2,300 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🔶 COMBILIFT C4000 – 2017 – 3310 HOURS – DIESEL – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for operation. No compromises. This COMBILIFT C4000 is not just a machine — it is a guarantee that your logistics will run smoothly, reliably, and without downtime. Designed for demanding working environments and fully serviced both technically and visually, the truck presents itself as new and is ready for immediate use. 📌 Key technical specifications: 📅 Year of manufacture: 2017 ⏱️ Operating hours: 3310 🔥 Drive: Diesel 💪 Lifting capacity: 4000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1320 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Superelastic (100%) 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2400 mm | Length 2300 mm | Width 2300 mm 🏗️ Overall height: 2800 mm 🛞 Tyres: SE – Front 200/50-10 | Rear 27x10-12 📦 Ideal for: 📚 Narrow-aisle warehouses 🪵 Wood, steel, and pipe industry 📏 Handling long loads Codjyrxv Tepfx Agkepw 🏭 Indoor and outdoor use FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: excellent (used), Pressure beam saw PANHANS ECOPAN - used - PC control with optimization, scoring unit, Csdpfjyrqrtsx Agkepw automatic cutting length detection, side pressure device, air cushion tables, stepless feed of the saw carriage, label printer ----- Technical Data ----- Cutting length: 4,200 mm, cutting width: 4,200 mm, max. cutting height: 72 mm, number of clamps: 6 pcs, max. saw unit feed: 100 m/min, max. rip fence feed: 80 m/min, main saw motor power: 11 kW, scoring saw motor power: 1.5 kW, main saw blade Ø: 300 x 30 mm, scoring saw blade Ø: 180 x 30 mm, dust extraction port Ø bottom: 140 mm, dust extraction port Ø at pressure beam: 3 x 100 mm, airflow: 5,000 m³/h, compressed air connection: 6 bar, air consumption: 140 l/min, rated current: 38 A, max. pre-fuse: 50 A Quality information: - complete basic inspection - complete basic cleaning - electrical system checked - immediately ready for operation

Condition: good (used), Year of construction: 2018, overall weight: 1,000 kg, volume flow: 2,000 m³/h, Herding Extraction System COMP 1500-8/9 SB Manufacturer: Herding GmbH Filter Technology Model: Herding COMP 1500-8/9 SB Year of manufacture: 2018 Type: Industrial Extraction / Filtration System Airflow rate: 2000 m³/h Weight: 1000 kg Control unit: Herding MP 12 Filter cleaning: Pneumatic pulse cleaning Machine ID: 28694 Machine ID: 28695 CE marking: present Quantity: 2 Codsyrndtopfx Agkjpw