Used Wet Sharpening Machine for sale (65,196)

Condition: good (used), With the OptiControl instrument measuring system from WEINIG, you can optically measure drills, PowerLock and hydraulic instruments and transmit the highly accurate measurement results to the woodworking machine. The device's 20x optical magnification ensures accurate measurement results. The measurement results are transmitted to the planer via a computer and the PowerCom software. The machine can also create completely new profiles. OptiControl PowerCom offers you: measuring instruments recording data from measured instruments creating new profiles Online data transmission optimization of work tasks time saving when setting up the planerTool measuring stand for measuring tool radius and height. Measurements can be read of digital read-outs. Technical details Tjdpfx Abjyl Rm Reteb Tool diameter min - 100mm Tool diameter max - 300mm Tool length maximum - 330mm 220v - 50hz Weight - 180 kg Supplied with operating instructions.

Condition: excellent (used), Year of construction: 2023, Deburring machine for band saw blades model LV60. It removes the residual welding bead. Linear removal movement and manual fixing clamps. Tedpjrzqa Hofx Abtsb

Condition: ready for operation (used), functionality: fully functional, Wurster & Dietz Trimming and Re-Cutting Machine Type FR7 with in-machine adjustment Star-delta soft start Feed roller table Single-blade spiral roller chip separator Chips discharged into a trolley Main product on the feed roller table Tsdpfxjv I D Shj Abtjb

Condition: used, Automatic sharpening machine Vollmer, model CHC 21 H; minimum and maximum width of bandsaws: 65–200 mm, tooth pitch: 12–80 mm, minimum tooth height: 5 mm, set per side from 0.3 to 1.5 mm, power: 0.55 kW, estimated machine weight: 550 kg, year: 1981, serial no. 364 Tsdsy Swluopfx Abtsb

Condition: good (used), Year of construction: 1975, Schmid saw blade sharpening machine Saw blade sharpening machine type AS 4 for circular saw blades diam.: 20 - 400 mm for circular cut-off saws up to diam.: 550 mm tooth pitch up to: 22 mm with dividing disk: 28 mm Saw blade width up to: 6.0 mm Grinding wheel diam.: 150 mm Grinding wheel speed: 3500 rpm. Infinitely variable speed control: 70 - 200 rpm. Drive power: 0.55 kW - Base frame - Grinding wheel - accessories Tsdpoq S Uwbofx Abtsb used

Condition: used, Year of construction: 1974, Technical details: total power requirement: 1,65 kW Tsdpfx Aowqplkebteb weight of the machine approx.: 620 kg Saw Blade Sharpening Machine Machine not complete - grinding spindle motor missing! for sale as spare part dispenser! *

Condition: excellent (used), functionality: fully functional, For sale: VOLLMER CX100 CNC (Germany) sharpening machine for circular saw blades. It operates automatically and features oil cooling, ensuring high-quality sharpening. Sharpening occurs on both the front and back edges of the teeth. Many basic programs are available, but you can also create your own custom program for your saw. Tjdpfsy Ectksx Abteb Easy setup and maintenance. A factory-installed ventilation hood is included. A video showing how it works is available.

Condition: good (used), CV saw grinder VOLLMER model CNE Tjdpfsvgdc Djx Abteb

Year of construction: 2002, condition: good (used), Vollmer CA 200 Tsdefbgvdjpfx Abtob

Condition: used, machine/vehicle number: 1339, Lederschärfmaschine / Leather sharpening machine ZPS Gottwaldov KS-3 Serial-No. 01339/P2 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Tsdpfx Aetzc N Usbteb On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2008, grinding diameter 160 mm dist. between centers 645 mm centre height 320 mm control SIN 840D turning speeds 27.000 U/min x-axis 550 mm y-axis 235 mm z-axis 300 mm A - axis 360 ° C-axis 270 ° total power requirement 20 kW Tjdpfxexxbzds Abtjb

Condition: used, Sharpening and leveling machine, Oppliger. Tedpfodm I R Hox Abtsb

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: CAL 200, For Sale: Vollmer CA 200 Circular Saw Blade Grinding Machine – Fully Refurbished – Year 1996 Manufacturer: Vollmer Model: CA 200 Year of Manufacture: 1996 Condition: Fully refurbished, excellent working condition A Vollmer CA 200 circular saw blade grinding machine is offered for sale. This machine was manufactured in 1996 and has been fully refurbished. It has always been well maintained and is in excellent technical condition. The machine is fully operational and ready for immediate use. It delivers the precision, reliability, and durability for which Vollmer machines are well known. Features: Fully refurbished Tjdpfx Abozwv Sbstjb Excellent technical condition Regularly maintained 100% functional and production-ready High-precision grinding performance Includes complete grinding instructions/documentation Inspection and demonstration available upon request This machine is an excellent investment for sharpening companies, sawmills, woodworking manufacturers, and tool service providers looking for a reliable and cost-effective Vollmer grinding machine.

Condition: ready for operation (used), NN wet battering machine Workshop-tested, fully functional Belt width: 40 cm Dimensions: 230x110x125 cm Tjdpfoykkrqox Abtsb Sale without warranty, no returns accepted

Condition: new, Year of construction: 2026, Yanigav AP350 Sharpener • Weight: 750 kg • Drive: Hub drive PTO • Maximum opening: 350 mm Tjdpfx Ajr Ezfdebtjb • Cylinder stroke: 750 mm • 4 adjustable sharpening angles • Blade holder with polyamide bushings • Pedal-operated for left- and right-handed use

Condition: good (used), Year of construction: 1963, machine/vehicle number: 30769, saw blade diameter: 300 mm, input frequency: 50 Hz, input voltage: 380 V, Heller Brothers SA 315 -WKG 972 On offer here is an automatic saw blade grinding machine from Gebrüder Heller. Technical data: Saw blade diameter: 300 mm Clamping angle: 20 ° Lateral displacement: 73 mm Power supply / connected load: 380 Volt 50 HZ Factory No.: 30769 Tsdpfx Aeurkypobtjb Rated current: 2 A

Condition: good (used), Alber sharpening machine for band saw blades Blade width 50 - 206mm Tooth pitch 20 - 50mm Todpoglui Asfx Abtob

Condition: new, The ideal addition to your grinding/deburring machine (we also have the suitable deburring machine in stock!): Ulmatec Wet Separator Extracted materials: steel / stainless steel / aluminium, dry dust All water-contact parts made of stainless steel. Control via display. Motor: 7.5 kW, 400 V, 50 Hz, IE3 Max. airflow: approx. 11,000 m³/h Max. negative pressure: approx. 4,000 Pa Inlet diameter: Ø 355 mm Discharge: Drain valve Filling: Automatic via solenoid valve Included: HEPA post-filter (for stainless steel processing) ATEX version (e.g. for aluminium processing) Excluding piping Tjdpfx Abex Diiaotjb Maximum distance between extraction unit and machine: 10 m Connection to the on-site supply network is to be carried out by the customer.

Condition: used, functionality: fully functional, 1. CNE 1965 €1,300 2. CNE 1970 €1,400 Todpswb Smlefx Abteb 3. CNE 1970 €1,400 4. CNG 1970 €1,100 5. CNS 1957 €800 6. CNL 1970 €800 7. CNG 1972 €1,100 8. CNE 1968 €1,400 9. CNS 1975 €1,600 10. CNE 1966 €1,300 11. CMS 1959 €800 12. CNS 1955 €800 13. CNE 1969 €1,400 14. CNE 1968 €1,400 15. CNH 1970 €2,400

Condition: new, Year of construction: 2026, CNC grinding machine new model - all tooth shapes - for sharpening band saw blades from 25mm to 400mm width - desired tooth shape can be drawn - easy programming Tjdpjytx Hnofx Abteb - automatic saw height positioning - automatic grinding wheel alignment - automatic angle change 0-40 degrees Febt Nbwjytx Hno Dujfw - large coolant reservoir 400l - high coolant flow - automatic machine lubrication - grinding wheel diameter 350mm - transparent panel - rear saw feeder - grinding option from 3.8m to 16 meters - automatic saw transfer over the machine - automatic cabin opening/closing - left or right machine version available

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 20780, Fanuc Oi-MB - spindle HSK50 - 50-10'000 min-1 Todpfx Abofbt R Eoteb 5 axes XYZAC Manufacturing origin CH Voltage 3x400V/50Hz Netweight 8’000 kg Dimensions 1170x2270x2260 mm TECHNICAL DATA (standard) Control GE Fanuc 160 i-MB Axes 5, simultaneously controllable MEASURING SYSTEMS X-, Y- and Z-axes resolution 3 µm A-axis 0,0001° C-axis 0,0001° GRINDING HEAD, GRINDING SPINDLE Power 15 kW Spindle speed 50 – 10'000 min-1 Spindle attachment HSK 50 Max wheel diameter up to 250 mm Max wheel number 6 LINEAR-AXES X-axis, travel 380 mm. Max speed 20'000 mm/min. Resolution 0,0001 mm Gear ratio 1 : 1 Drive power 1.0 kW, 3 Nm Y-axis, travel 300 mm. Max speed 5'000 mm/min. Resolution 0,0001 mm Gear ratio 24 : 4 Drive power 1.0 kW, 8 Nm Z-axis, travel 280 mm. Max speed 20'000 min-1 Resolution 0,0001 mm Gear ratio 1 : 1 Drive power 1.0 kW, 3 Nm SWIVEL-AXES C-axis, angle 210° Max speed 72°/sec. Resolution 0,0001° Drive power 1.0 kW, 8 Nm C-axis’, angle +/- 180° Max speed 90°/sec. Drive power hydraulic A-axis DMR 100 Rotation infinite Max speed 225°/sec. / 3600°/sec. Resolution 0,0001° / 0,0001° Power 1.0 kW / 5.8 kW Taper ISO 50 Center height 210 mm TABLE narrow piece / large piece / total Length 500 mm / 500 mm / 1000 mm Width 145 mm / 330 mm ELECTRIC CONNECTED LOAD 9 kW / 15 kW Power rating 27 kVA / 36 kVA Tension 3x400 V AC Frequency 50 Hz Main fuse 63 AT errors and omissions excepted-data given without obligation

Condition: excellent (used), Band saw welder Viscat model FW400 Todpfjwup U Tex Abteb

Condition: used, Year of construction: 1994, workpiece diameter 110 mm grinding length 410 mm clamping length 20 mm total power requirement 0,25 kW Todpfxjt Hw Nmj Abtjb weight of the machine ca. 500 kg dimensions of the machine ca. m Profile Tool Grinder for Chamfer Angles, accessories

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x1000x1600 mm Weight 350 kg Total power requirement 0,6 kw Tsdpfsvz Ht Iex Abteb

Condition: not inspected (used), Brand: Walter Model: Woodtronic CNC5 with 2-pallet loader Year of manufacture: 2000 Sold as is. Used 8-axis CNC carbide saw blade grinding machine for face and back grinding, with linear loader (2 stations). Diameter range: 80 to 850 mm - Standard measuring probe for recording and managing grinding parameters - SIEMENS MMC103 CNC control - All tooth geometries 2-pallet loader Tsdjxm T Huepfx Abteb - Blade diameter up to 600 mm - Magnetic pins Options available on request Contractual photos