Used Winch for sale (1,268)

Condition: used, maximum load weight: 30,110 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 10/2021, loading space volume: 102 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Fliegl sliding floor +/- 102 cbm, long truck type 1, cargo floor with 21 boards 10 mm, complete emptying (running front wall), push-in/pull-out function, double-wing door with espagnolette lock at the rear, access and standing area at the front of the body, roll-up tarpaulin, side wall protection tarpaulin, aluminum wear strips on the end pieces, cable remote control, ABS, EBS, SAF axle(s), disc brakes, air suspension with lifting/lowering device HA, support winch(s), storage box, closed side impact protection, reversing camera, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV approval. If a new TÜV approval is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. Chjdpfx Aev H Immsbzod We would be happy to provide you with a financing or leasing offer for this property. Please contact us!

Condition: used, mileage: 4,03,000 km, Year of construction: 2017, Serial number: YV2XZ22C8HA80xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21704 Specifications: Km: Approx. 403,000 Gearbox: Automatic Full air suspension 6x2 with steering on 3rd axle Engine brake Decent tires On-Spot Euro 6, 419 hp JOAB body Cedpfx Aboxt Dglszjhd 2 chambers Approx. 4 m³ for bio and 16.7 m³ rear Winch Bale clamp Reversing camera Botek scale and printer Radio/CD Climate/AC Service history from Volvo Ready for delivery Description:Volvo FM410 Refuse Truck from 2017.JOAB body with 2 chambers.Service history from Volvo.Ready for delivery. Km: 403000 HK: 418 Technical approved: Yes EU-approved until: 30.11.2025 Own weight: 16800 Total Weight: 27000 Payload: 10125 Width: 255 Length: 980 Euro: 6 Model: Volvo FM410 2-Kammers Renovasjonsbil Gearbox: Automatic

Condition: new, empty load weight: 2,830 kg, maximum load weight: 9,070 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,000 mm, loading space width: 2,000 mm, suspension: steel, tire size: 235 / 75 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height loaded: 590 mm, reinforced steel checker plate floor, 2 x ramps (2,550 mm long x 900 mm wide), 8 lashing eyes (2 t) on the outer frame, 4 lashing boxes (5 t) in the corners, geared support winch with load and fast gear, front, 2 times folding supports, rear, , chassis and body hot-dip galvanized, also available with hydraulic ramps! , Surcharge for support frame for milling conveyor 600 ¤, , -- Misprints, errors and changes excepted, Sample pictures --, More data under: !, More Details: ! Chodsxrnqfopfx Abzod

Condition: excellent (used), lifting height: 22,000 mm, Year of construction: 2019, operating hours: 3,354 h, Drivetrain Make of engine: Yanmar Codpfx Ajxryrnebzjhd Weights Empty weight: 4.700 kg Functional Lifting capacity: 3.990 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Transport dimensions (LxWxH): 4,3x0,8x1,93 Latest inspection: 2025-02-14 Production country: NL Additional information Please contact Vink Machinery for more information Hoeflon C10 * 2019 * Diesel and 380-volt drive * 3354 working hours * Fly jib * 1000kg winch * Non-marking tracks * Remote control * 22-meter hook height * 19.8-meter horizontal reach * Infinite slewing rotation * 3,990 kg lifting capacity * 4700 kg net weight * Inspection valid until February 2026 * Includes maintenance history

Condition: used, mileage: 12,92,708 km, power: 130 kW (176.75 HP), fuel type: diesel, color: white, axle configuration: 4x2, fuel: diesel, gearing type: mechanical, emission class: euro5, Year of construction: 2009, Number of cylinders: 4 Engine capacity: 4.249 cc Empty weight: 4.360 kg Carrying capacity: 4.240 kg GVW: 8.600 kg Auction item. Truck is in working condition. 4 cylinder engine. Chodpfx Aexq S N Nebzjd Sold with a towing winch. Sold together with De Rema car transporter. De Rema: lifting capacity - 4 000 kg., year of manufacture - 2009. Technical inspection not valid.. VIN: W0D1000008E00730, SDK - MHEKRPPM.

Condition: used, maximum load weight: 30,080 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 07/2022, loading space length: 14,715 mm, loading space width: 2,468 mm, loading space height: 2,830 mm, loading space volume: 102 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Fliegl moving floor +/- 102 cbm, long truck type 1, cargo floor with 21 boards 8 mm, complete emptying (moving front wall), push-in/push-out function, loading pressure gauge, double-wing door with espagnolette lock at the rear, access and standing area at the front of the body, roll-up tarpaulin, service door at the front, side wall protection tarpaulin, aluminum wear plates inside (wedge-shaped), aluminum wear strips on the end pieces, stainless steel wear plate at the rear under the moving floor, ABS, EBS, SAF axle(s), disc brakes, air suspension with lifting/lowering device HA, support winch(s), storage box, closed side impact protection, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV approval. If a new TÜV approval is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this property. Please contact us! Codevnpzbopfx Abzohd

Condition: used, mileage: 1,16,002 km, Year of construction: 2010, Serial number: WDB9066551S40xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21702 Specifications: 2010 model 116,002 km Automatic transmission 190 hp 4x2 1 tractor included Inspection equipment Ex-approved Control panel Ac in office department Camera Winch Cable-operated Tires (see pictures) Rear view camera Climate Codpfsxt Ddwex Abzshd Ac Radio Ready for delivery   Description: We have a 2010 Mercedes-Benz Sprinter 519 cdi R inspection van for sale. The car is well equipped for interior inspection. It comes with 1 tractor that can be built in different sizes. Control panel and cameras are included in the office section. There is also AC in the office department. An engine error code appears on the car's display. So errors and deficiencies may occur and some cost must be taken into account. Ready for delivery Km: 116002 HK: 190 Technical approved: Yes EU-approved until: 28.01.2026 Own weight: 2562

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: beige, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side walls swinging and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed into the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the sides, continuously height-adjustable draw tube, removable rear stakes, gearbox support winch with load and high-speed mode at front, integrated receiver compartment for two aluminum loading ramps in chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- Subject to misprints, errors and changes, sample images --, More data at: !, More details: ! Chjdpfx Absxrnqxezod

Condition: used, maximum load weight: 27,090 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2022, loading space length: 14,750 mm, loading space width: 2,470 mm, loading space height: 2,750 mm, loading space volume: 100 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Fliegl moving floor +/- 100 cbm, long truck type 1, cargo floor with 21 boards 8 mm, complete emptying (moving front wall), push-in/push-out function, loading pressure gauge, double-wing door with espagnolette lock at the rear, access and standing area at the front of the body, roll-up tarpaulin, service door at the front, side wall protection tarpaulin, aluminum wear plates inside (wedge-shaped), stainless steel wear plate at the rear under the moving floor, ABS, EBS, SAF INTRA axle(s), disc brakes, air suspension with lifting/lowering device HA, SAF support winches, storage box, vehicle can be covered with advertising and/or labeled Cedpfx Aevnp Arebzohd Our offer is generally without a new TÜV approval. If a new TÜV approval is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this property. Please contact us!

Condition: used, mileage: 6,97,000 km, Year of construction: 2004, Serial number: YK2HEDD104K05xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20749 Specifications: - 2004 model - Km: approx. 697,000 - EU-approved until 21.02.2026 - 1987 EKA body - 6x4 - Engine brake - Suspension: steel - 631 hp - Wheelbase: 465/137 cm - Largest winch: 30 tons - Smallest winch: 10-15 tons - Tool cabinet included - New injectors and wiring - Compressor replaced - Rear support legs - Tires (see pictures) - Extra lights - Rotor beam - Chains - Remote control - Manual - AC/climate - Bed - Ready for delivery Description: 2004 Sisu E18M 6x4 heavy excavator with EKA body and chains. The car has just been inspected by the EU and the owner spent 300,000 kroner on this inspection. The wiring harness, compressor and injectors are some of the things that were replaced and the engine was cleaned. The blue tool cabinet is mainly what comes with it, as well as chains so that the car is approved. Everything else in the cabinets is negotiable on price. The largest winch is 30 tons and the smallest is between 10-15 tons, the owner doesn't remember exactly. You can't use both winches at the same time. Csdpfx Abjwvy T Nszohd Watch the video. Ready for delivery. Km: 697000 HK: 630 Technical approved: Yes EU-approved until: 21.02.2026 Own weight: 19030 Total Weight: 34200 Payload: 15095 Width: 255 Length: 955 Euro: 3 Model: E18M 6x4 tungberger m/ EKA påbygg og kjettinger. SE VIDEO

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: beige, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side walls swinging and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed into the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the sides, continuously height-adjustable draw tube, removable rear stakes, gearbox support winch with load and high-speed mode at front, integrated receiver compartment for two aluminum loading ramps in chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- Subject to misprints, errors and changes, sample images --, More data at: !, More details: ! Codoxqpzvspfx Abzohd

Condition: used, maximum load weight: 31,870 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2020, loading space length: 13,610 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 93 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Flatbed tarpaulin frame construction with side sliding tarpaulins, sliding roof, 2 x anchor rails for locking rods on each side, screen-printed floor, laid between the longitudinal beams and outer frame, reinforced with sheet steel in the rear area, continuous lashing holes in the outer frame, BÄR folding tail lift type --, battery box for LBW, 2x storage box, ABS, EBS, Jost support winches, KÖGEL axle(s), disc brake system, air suspension with lifting and lowering device, lift axle, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. Chjdpsvnn Exofx Abzjd We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: used, mileage: 5,874 km, Year of construction: 2021, Serial number: YV2RT60FXKA84xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20511 Specifications: - 2021 model - 5874 km (will increase slightly) - Eu-approved until: 21.02.26 - Euro 6 engine - 8x2 - 551 Hp - Suspension on 1st and 2nd axle: Steel - Suspension on 3rd and 4th axle: air - 2 x 110 liter variable pumps - 2 x manual extensions for main boom and 2 x for jib - Scanreco optical remote control (Top model) - Weight cell main boom - Extra function for main boom and jib - Auto leveling (The car puts itself in a level position ready for lifting.) - Virtual room (Possibility to limit all axes with a few keystrokes, no need to go to a workshop for this. Brilliant when working under high voltage etc.) - SKF central lubrication of the crown and up to the first joint - Extra function fully extended on jib - Single winch hook (Jib / main boom) - 2-part winch hook (Jib / main boom) - 4-part winch hook (Main boom) - Hook for jib - Hook for main boom (Large hook) - Emergency lowering unit (24 volts) Cedpfx Ajwphixsbzehd - Wire stop sensor and sleeve - 4 ton winch - Diagnostic cable for online help (Remote help) - Danfoss valve center - 2 x 2 ton counterweight (Must only be used for cranes above the cabin otherwise the counterweights are not needed, and these can be removed as needed) - Front support leg Construction: - 4 x work lights strategically placed inside each support leg cabinet. - 50" LED bar work light rearward on the cabin - Powerful LED lamps in the crane. - VBG mount, with air servo control unit mounted in the rear cabinet left side. - Bracket on the roof - 2 pcs high beam LED bar on the roof forward (daylight!!). - Orange work warning LED beam on the roof. - EasyUp foldable ladder in the side with railing. - Boxes for chain, chainsaw etc. Mounted on the rear support leg so that these are driven out together with the support leg and are at the same time packed away while driving. - Charger for control in the cabin - Plastic internal screens axle 3 and 4. - 3 edge pull-out cabinet between axle 3 and 4 - On the left side between axle 2 and 3 there is a large cabinet with 500 W fan heater installed to hang clothes to dry etc. - Plane / bottom at the rear closed with alloxed aluminum floor plates that are cut to fit the car perfectly, with rounded edges for a very professional send. - CNC manufactured plates up the rear edge of the cabin. - Fully painted sides, cabin and stern. - Resting cradle for crane for driving without jib. - 5 support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cradles at the rear on the "level" - Right side large cabinet 1.2 x 1 meter - Powerful LED back / work lights at the rear. - Rear part of the car rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages. - Hatches strategically placed for access to relevant devices under the bodywork. - Precisely cut out fields in the side coverage for access to the screen, manual controls, emergency lowering functions etc. - Marker lights along the side mounted so that they flash together with the turn signals / direction indicators - Cradle to hold the jib when not in use. - Hydraulic extra function dismantled main boom and jib,...

Condition: new, empty load weight: 3,960 kg, maximum load weight: 10,440 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55 R 19,5, color: other, gearing type: other, front tire size: 385/55 R 19,5, rear tire size: 385/55 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, loading area length approx. 5,700 mm, side walls 600 mm high, galvanized, + lattice attachment 1,000 mm high, loading height approx. 990 mm, 4 x lashing eyes in the floor 5 t each, 8 x lashing eyes in the floor 3 t each, reinforced geared support winch with load and fast gear at the front, ?Wide tyres: 385/55 R 19.5, Chassis: Hot-dip galvanized, , Surcharge for:, Aluminium ramps (approx. 3,520 x 400 mm) load capacity 10 t per pair and 2 folding supports at the rear, Price: 1,500 Euro , , , -- Misprints, errors and omissions excepted, Sample pictures --, More data under: !, More Details: ! Chjdexqp Dqjpfx Abzjd

Condition: used, maximum load weight: 24,600 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 11/2001, total width: 2,480 mm, total height: 2,980 mm, Equipment: ABS, Hydr. tipping device, separate hydraulic system, container chassis for, 1 x 20? container, ABS, EBS, BPW EcoPlus axle(s), drum brake system, air suspension with lifting and lowering device, support winches, vehicle can be fitted with advertising and/or lettering Cjdpfsw Ndv Tsx Abzehd Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Condition: used, Year of construction: 2017, Serial number: tmg17sedo222/xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21688 Specifications: 2017 model 9203 hours 3114 stroke hours 168 kW 16400 kg Leica GPS 2540 hammer Rod shifter Carousel Magazine Winch Compressor Aluminum feed beam Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Vacuum cleaner Remote control Light Ready for delivery   Description: Codpfx Abexr Tx Ujzehd We have a 2017 Atlas Copco T35R-01 Drilling rig w/ cop 2540 hammer, grinder and Leica gps for sale. The rig functions as it should and maintenance and service have been taken care of continuously by the owner. The GPS control provides precise control over the drilling pattern and drilling depth, which contributes to optimal volley and a better blasting result. Ready for delivery. Own weight: 16400 Engine hours: 9203 Model: T35R-01 Borerigg m/ cop 2540 hammer, sliper og Leica gps

Condition: new, empty load weight: 3,280 kg, maximum load weight: 7,220 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, loading space height: 900 mm, loading space volume: 11 m³, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Csdpfxjxqpx Ie Abzjhd

Condition: used, maximum load weight: 30,080 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 05/2022, loading space length: 14,715 mm, loading space width: 2,468 mm, loading space height: 2,830 mm, loading space volume: 102 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Fliegl moving floor +/- 102 cbm, long truck type 1, cargo floor with 21 boards 8 mm, complete emptying (moving front wall), push-in/push-out function, loading pressure gauge, double-wing door with espagnolette lock at the rear, access and standing area at the front of the body, roll-up tarpaulin, service door at the front, side wall protection tarpaulin, aluminum wear plates inside (wedge-shaped), aluminum wear strips on the end pieces, stainless steel wear plate at the rear under the moving floor, ABS, EBS, SAF axle(s), disc brakes, air suspension with lifting/lowering device HA, support winch(s), storage box, closed side impact protection, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV approval. If a new TÜV approval is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. Cedpevnpdpefx Abzshd We would be happy to provide you with a financing or leasing offer for this property. Please contact us!

Condition: used, Year of construction: 2017, Serial number: tmg17sed0500/8992 xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21690 Specifications: 2017 model 9836 engine hours 3126 stroke hours Chedpfxsxr Txzo Abzed 168kW 17200kg Leica GPS 2560 hammer Rod shifter Carousel Magazine Winch Compressor Aluminum feed beam Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Vacuum cleaner Remote control Light Ready for delivery     Description: We have a 2017 Atlas copco smartroc T40-11 Drilling rig w/ 2560 hammer, CME grinder and Leica gps for sale. Everything works as it should according to the owner. Services and maintenance have been taken continuously. The model is known for its versatility, precision and ability to operate effectively under tough conditions. Ready for delivery. Own weight: 17200 Engine hours: 9836 Model: smartroc T40-11 Borerigg m/ 2560 hammer, CME sliper og Leica gps

Condition: used, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 11/2001, total width: 2,480 mm, total height: 2,980 mm, Equipment: ABS, Hydr. tipping device, separate hydraulic system, container chassis for, 1 x 20? container, ABS, EBS, BPW EcoPlus axle(s), drum brake system, air suspension with lifting and lowering device, support winches, vehicle can be fitted with advertising and/or lettering Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Chjdpfxsw Ndupo Abzod Please contact us!

Condition: used, Year of construction: 2012, Serial number: AVO 12a1172/8992xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21691 Specifications: 2012 model 13265 engine hours 5138 stroke hours 168kW 16600 kg Leica GPS 2540 hammer Rod shifter Carousel Magazine Winch Compressor Aluminum feed beam Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Vacuum cleaner Remote control Light Ready for delivery Description: We have a 2012 Atlas Copco Flexiroc T40-11 drilling rig w/2540 hammer, CME grinder and GPS for sale. All maintenance and services have been taken care of. The chassis is somewhat worn and should be replaced. Errors and shortcomings may be found as the rig is from 2012. But all functions work as they should according to the owner. Ready for delivery Own weight: 16600 Engine hours: 13265 Chedpfx Asxr Txnsbzod Model: Flexiroc T40-11 borerigg m/2540 hammer,CME sliper og gps

Condition: used, maximum load weight: 26,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/1994, loading space length: 13,030 mm, loading space width: 2,600 mm, total width: 2,600 mm, total height: 4,000 mm, Equipment: ABS, Loading bed: 8,620 mm, rear slope: 450 mm, width: 2,600 mm, width: 3,111 mm with extensions, extendable and/or foldable extensions, gooseneck: 3,960 mm, loading bed height: approx. 880 mm, hydraulically lateral adjustable loading ramps (LxW) 2,900 x 830 mm, electric hydraulic pump, cable remote control, 2 heavy-duty lashing rings per side, 5 stake pockets per side, extendable warning signs, central lubrication system, support winches, three axles hydraulically force-steered, drum brake system, air suspension, rotating beacon, reversing lights, vehicle may be equipped with advertising stickers and/or lettering. Our offer is generally without a new technical inspection (TÜV). If a new inspection is required, we are happy to provide a quote from our partner workshops! The vehicle may be fitted with advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to provide financing or leasing options for this item. Please contact us! Cedpsw Sca Asfx Abzohd

Condition: used, maximum load weight: 35,200 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2013, total width: 2,550 mm, total height: 1,300 mm, Equipment: ABS, Tank container chassis / for 20 foot and 30 foot containers, ADR type class FL. incl. EX/II. EX/III and AT, ABS, EBS, BPW EcoPlus axle(s), aluminum rims, disc brake system, air suspension with lifting and lowering device, lift axle, support winch(s), vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us! Codpfx Absv Ri D Uozshd

Condition: used, maximum load weight: 35,180 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2014, total width: 2,550 mm, total height: 1,300 mm, Equipment: ABS, Tank container chassis / for 20 foot and 30 foot containers, ADR type class FL. incl. EX/II. EX/III and AT, ABS, EBS, BPW EcoPlus axle(s), aluminum rims, disc brake system, air suspension with lifting and lowering device, lift axle, support winch(s), vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us! Cedpfxsvnmx Rs Abzjhd

Condition: used, maximum load weight: 27,400 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2011, loading space length: 13,460 mm, loading space width: 2,480 mm, loading space height: 2,480 mm, loading space volume: 82 m³, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, REISCH moving floor +/- 82 cbm, "Cargo-Floor" floor with 21 boards 6 mm, cable remote control, complete emptying (moving bulkhead), push-in and push-out function, double-wing door with espagnolette lock at the rear, access and standing area at the front of the body. front standing area on body, roller tarpaulin, ABS, BPW axle(s), disc brake system, 1st axle - lift axle, air suspension with lifting and lowering device, support winch(es), stainless steel storage box 2x, vehicle can be fitted with advertising and/or lettering Chsdpfx Aowbmibebzod Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us!