Used Wind Protection for sale (13,900)

Year of construction: 2020, condition: like new (used), functionality: fully functional, The A.Celli Stream in Line 668 is a complete industrial in-line slitter winder designed for integration into medium- and low-throughput production lines for nonwoven fabrics and composite materials. The machine performs longitudinal web slitting and surface-driven winding of finished rolls. The slitting system uses 12 circular-knife units operating with band counter-knives mounted on a motorized expanding shaft. The configuration includes a motorized S-wrap, a motorized SUS supporting roller, edge-trim extraction, shaft supports, a bar acceleration mechanism and a roll holder. The web is guided through bowed spreader rollers to reduce wrinkles and folds. The machine is equipped with AC drives, a control cabinet, an operator panel, a desktop computer with monitor and industrial communication via Profinet and Ethernet TCP/IP. Manufacturer: A.Celli Nonwovens S.p.A. Machine type: Stream in Line Machine version: 668 Serial number: 2020026 Year of manufacture: 2020 Application: Longitudinal slitting and winding of nonwoven fabrics and composite materials Winding design: Surface driven Production speed: 200 m/min Web threading speed: 10 m/min Cross-cutting system: Circular knife Longitudinal slitting system: Band counter-knives on a motorized expanding shaft Number of slitting units: 12 Edge-trim extraction: Yes Number of shafts: 4 Shaft diameter: 3″ Drive system: AC motors Motorized S-wrap: Yes Motorized SUS supporting roller: Yes Shaft supports: Yes Bar acceleration mechanism: Yes Roll holder: Yes Drive side: Left Operator side: Left Control cabinet side: Left Operator panel colour: RAL 7035 Control cabinet colour: RAL 7035 Length: 6200 mm Width: 5550 mm Height: 3045 mm Total weight: 16,000 kg Supply voltage: 400 V Number of phases: 3 Auxiliary AC voltage: 230 V DC control voltage: 24 V Frequency: 50 Hz Power supply earthing system: TN Protection rating of power cabinets: IP55 Electrical reference standard: IEC 60204-1 Cable entry into cabinets: From below PLC communication: Profinet Field communication: Ethernet TCP/IP PLC software: TIA Portal Operator computer: Desktop computer with monitor Compressed-air pressure: 6 bar Air consumption during web threading: 4500 Nl/min Air consumption during normal operation: 700 Nl/min Air consumption during the change cycle: 2000 Nl/min Cable routing: In floor ducts Rodpjzudfdefx Airoch Operating temperature: +15°C to +40°C Storage temperature: +25°C to +55°C Relative humidity: Below 80% Maximum operating altitude: 1000 m Equivalent continuous sound pressure level LEQ: Below 85 dB A-weighted sound power level LWA: Below 83 dB Installed drives: Transmission roller, S-wrap roller, slitting unit, SUS roller, accumulation shaft The machine comes from an industrial nonwoven production facility and is offered as shown in the photos. A detailed PDF with the complete technical specification of the machine is available upon request. We will be happy to provide it to seriously interested customers. Additional photos and further information are also available upon request. Price: on request / negotiable. Please contact us for further information.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Precision winding machine for films and web materials. Designed for consistent unwinding, guiding, and rewinding of roll materials. Integrated safety system with protective glazing, laser start position indicator (green), emergency stop switches, and pneumatic film guiding. Machine frame made of steel, electrically controlled drive. Ideal for production lines in coating or laminating technology. Rcodpfoxzuiyjx Airjh

Condition: new, Year of construction: 2025, A compact design sheet fiber laser metal cutting machine with complete protection Small occupied space balances complete protection and higher safety. Each frame of the cutting machine bed is welded after mortise-and-tenon joint to achieve perfect mechanical property and better stability and firmness. The pull-out cutting machine table, with the electric table optional, saves space occupation and freshen up the user operation experience. Convenient and fast open&close with one click; The laser cutter door is safe and reliable, by using rack-pinion transmission mode combined with self-locking cutting machine system Rcodpfxshwv N Hs Airsh Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W, 12000W Cutting Area: 1000*1500mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, Year of construction: 2014, functionality: fully functional, product width (max.): 1,400 mm, Roll winding, laminating, printing, and folding machine for sale. -Two printing units with chamber doctor blade system. -Cassoli calender with sleeve embossing. Rjdpfx Aoz Rn A Rjirech -Film laminating, folding machine with triangular fold. -Packaging machine for rolled goods up to 1400 mm wide. -A Hugo Beck packaging machine for the folded products is also for sale. Further details can be found in the images.

Condition: good (used), For sale is our ferrite air-gap grinding machine. Redpj Af I Iisfx Airoch The machine is fully functional (power cord is missing) and in good condition. Includes a comprehensive range of accessories. The sale includes a large number of grinding tools and holders for virtually any application. We would be happy to answer any further questions about the machine.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 04006, For sale is a stretch wrapping machine with a conveyor belt and scale. The machine was in the shipping department. Several programs can be started directly on the machine or via a cable switch (operated from the forklift). Process: The package is placed on the roller table of the machine by a forklift. The machine starts at the push of a button, is wrapped automatically, the film is separated, the package moves along a roller conveyor to the unloading station, and is weighed. The package is unloaded from the unloading station by a forklift. All information is provided without guarantee. Sale to commercial customers only. Rjdpfxewl Hp Nj Airoch Viewing by appointment in 94424 Arnstorf (Germany). Pickup in 94424 Arnstorf (Germany).

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 101022-76F, type of input current: three-phase, overall weight: 2,000 kg, input voltage: 380 V, Up for sale is a high-performance BOPP Slitting and Rewinding Machine manufactured by KUO GANG MACHINERY CO., LTD (Model: KG-201). This versatile industrial machine is specifically engineered for precision slitting and high-speed rewinding of BOPP adhesive tapes, packaging tapes, and various plastic films. Built with a robust mechanical frame, it offers high stability, precise tension control, and reliable continuous operation, making it an ideal choice for packaging manufacturers, tape converters, and printing facilities. The machine is in fully complete condition and comes equipped with an extended discharge/loading framework and auxiliary support structures. Features & Capabilities: Precision Slitting & Rewinding: Designed to handle BOPP rolls with clean edge-cutting and neat rewinding finish. Adjustable Speed Control: Smooth operational speed adjustment up to 100 m/min for optimized production cycles. Heavy-Duty Construction: Solid steel frame designed to minimize vibration during high-speed runs. Integrated Extension Bench: Includes extended feeding/discharge rails and support tables for convenient material handling and core loading. Rjdpfx Aie Admamsroch Easy Maintenance: Simple access to slitting blades, roller guides, and drive systems for minimal downtime.

Year of construction: 2019, condition: excellent (used), 2019 Mobile Ugab Protective/Testing Interlocked Chamber Approx Dimensions W1,890 x D850 x H2,040mm. Rjdps Ad Ab Hsfx Airoch

Condition: used, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension length: 1,000 mm, inner dimension width: 600 mm, inner dimension height: 600 mm, total length: 1,670 mm, total width: 1,700 mm, total height: 1,800 mm, overall weight: 800 kg, number of chambers: 1, Equipment: CE marking, Protective gas annealing furnace, Vötsch type VAW 60/100 Rjdpfx Aisz Azausrsch • Rated temperature: 750 °C • Power: 22 kW • Connected load: 24 kVA • Usable dimensions: 600 x 600 x 1000 mm (width x height x depth) Can be inspected while energized.

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: PET09622A, Automatic winding and packaging machine for flexible spiral hoses, pipes, corrugated hoses, and hoses with an outer diameter of 8 mm to 40 mm. After winding, the coil is wrapped with stretch film and, if necessary, automatically labeled by the label printer. The total of six loading units are loaded with hose sections and wound up one after the other. The package includes a wide range of spare parts. These include: Omron servo axle drives, trailing cables for drives and valve terminals, various pneumatic components, drive belts, sensors, etc. Capacity: 60 coils/hour Min. inner diameter of coil: 200 mm Max. inner diameter of coil: 380 mm Max. outer diameter of coil: 850 mm Min. width of coil: 120 mm Max. width of coil: 340 mm The technical data sheet can be found below the images; the operating instructions are attached. Rodpfxswd Emws Airsch

Year of construction: 2021, condition: like new (used), functionality: fully functional, Component 1: ATM-800 P Tangential Dereeler (2 pieces) Heavy-duty dereeler for controlled unwinding of copper wire coils. • Max. coil diameter: 800 mm • Max. coil width: 300 mm • Pickup hole: Ø52 / Ø56 mm • Max. coil weight: 300 kg • Braking force: 100 - 2000 N • Brake torque: 3 - 800 Nm • Max. speed: approx. 5 rpm • PLC control with torque sensor Component 2: HBK-40-S Automatic Taping Machine Professional automatic taping machine for coil and conductor insulation. • Servo-controlled taping head • Operator terminal and display • Integrated X-axis guidance Rcedpfxsz Ap R Io Airsh • Electric hysteresis brake • Automatic overlap control via encoder • Suitable for various insulation materials

Year of construction: 2013, condition: used, Number of winding stations: 36, operating voltage: 400V, current: 30A, frequency: 50Hz. Equipment: Fastflex, Digicone. Inspection possible by appointment. Redpfx Ae Aalpfjirech

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3769, total width: 1,667 mm, roll diameter: 1,067 mm, overall weight: 1,360 kg, product width (max.): 1,067 mm, input voltage: 460 V, ROTARY SHEAR SLITTING STATION: Rjdpfjy Ufgxex Airsch The rotary shear slitting station is a modular design allowing detachment from the main frame. The powered 60mm (2.367 inch) diameter upper and lower knife shafts drive the male and female shear knife assemblies. The male and female shear knife assemblies may be positioned anywhere within the web area and are held in position by eccentric locking keys. The removable male shear knife shaft assembly is mounted to a rigid dovetail bar assembly. The dovetail bar assembly is adjustable axially for shear knife face contact pressure and rotationally for knife overlap. A two-position lock lever assembly is used to rotate the dovetail bar assembly 900to the open position for removal of knife shaft assembly or closed in the slitting position. Rotary shear drive speed is proportional to web speed or manually controlled by the operator. REWIND: The slit web is alternately rewound on the duplex air expanding rewind shafts. Flange mounted rewind shafts provide ease of change to other desired types or diameters. The outboard rewind support swings open for removal of finished rolls from the cantilevered rewind shafts.

Condition: good (used), Year of construction: 2005, Denius modular container, type 840-k-x T 90 -2 External dimensions WxLxH 2965x8550x2910 mm Clear internal width 2650 mm Clear internal depth 8240 mm Clear internal height 250 mm Catchment volume 2800 l Permissible load per compartment 1000 kg/m³ Weight approx. 7400 kg Fire-resistant steel door, 2000x2000 mm, on the end face Inside, Bito shelving systems with a load capacity of 135 kg per shelf are installed. Complete with technical documentation and plans. Rcjdpo Ad Uxwofx Airsh

Condition: used, Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 60 rpm -Power: TA = 5 Nm -Construction: B3 -Shaft: Ø 25 mm -Protection class: IP 44 -Number: 1x available Rjdpfx Aiodkzv Esrsch -Price: per piece -Dimensions: 700/225/H210 mm -Weight: 30 kg

Condition: good (used), Year of construction: 1975, functionality: fully functional, total width: 1,900 mm, roll diameter: 1,800 mm, overall weight: 3,100 kg, product width (max.): 1,900 mm, input voltage: 440 V, Slitter rewinder 190 wide DC motors Shaftless input with hydraulic platform to raise the web, the system supports core sizes ranging from 3 inches up to 12 inches and processes of 150 to 1900 mm width webs, output core sizes ranging from 3 to 12 inches  Rjdpoy Ufkqjfx Airech

Condition: ready for operation (used), Year of construction: 1978, functionality: fully functional, machine/vehicle number: 81882 F, Winding machine Stollberg type WAD No. 81882 F Rsdpfoylwvfsx Airjch Disc 440 mm ø Revolution counter 220 Volt

Year of construction: 1991, condition: used, Drive: servo motors, individually for each axis, max. number of bending slides: 8, spring steel wire diameter: 0.2-1mm, copper wire diameter: 0.3-2mm, max. winding mandrel diameter: 10mm, max. winding spindle travel: 45mm, max. length of rotating initial leg: 50mm, end leg length: theoretically unlimited, winding spindle revolutions: limited by the winding spindle travel of 45mm, control system: 4-axis CNC positioning control Pronumerik Schleicher, the machine operates using DOS-based programming, including pay-off reel, accessories, operating manuals and documentation, well-maintained and in good condition. On-site inspection is possible. Rodpfx Aisz R A Izoroch

Year of construction: 2017, condition: ready for operation (used), Six identical Demsan fabric doubling and winding machines are offered. Max. fabric width: 2000mm, fabric infeed: from roll and in open width, fabric delivery book/roll: 1000mm, double folded, max. operating speed: 60m/min, operating direction: forward, control: Hitech touch panel. Machine dimensions X/Y/Z: 4000mm/3100mm/2600mm, weight: approx. 2390kg. Equipped with fabric tension control, electronic length measuring system with encoder, calibration function, RS-232 interface, end-of-fabric photocell, photocell-controlled fabric catcher and centering system, dancer roller mechanism, Argox thermal printer, photocell-controlled edge guiding system, motorized fabric guide adjustment, AC geared motors, frequency converters and pneumatic opening unit. Four machines were manufactured in 2017, and two machines were manufactured in 2016. Documentation available. Inspection possible by arrangement. Rjdpfxezta Eqe Airjch

Condition: like new (used), Year of construction: 2023, functionality: unexamined, machine/vehicle number: 230101, Ladies and Gentlemen, on behalf of our customer, we are selling the model ES-950SF ELCOMA wrapping machine described and photographed here. Rcodporvz R Dsfx Airoh We will be pleased to provide you with the exact specifications for this winding machine by e-mail. Also available via WhatsApp. This is an advertisement for information purposes only. The purchase contract can only be concluded at the specified location of the purchased item.

Year of construction: 2024, condition: new, functionality: fully functional, Protective cable conduits, electrical installation hoses from Pipelife at a special price. FXP20 (KUP) Total quantity: 9,000 m (180 bundles) Item number: KU-P-AS-E-MF-LSZH 20 Redpfxowtfiwe Airsch Packaging: 50 m per bundle FXP40 (KUP) Total quantity: 6,300 m (252 bundles) Item number: KU-P-AS-E-MF-LSZH 40 Packaging: 25 m per bundle FXP25 UV (RPE) Total quantity: 11,200 m (224 bundles) Item number: RP-E-SF-UV 25 Diameter: 25 mm Packaging: 50 m per bundle Special feature: cable protection conduit with additional UV protection FXP50 UV (RPE) Total quantity: 6,000 m (240 bundles) Item number: RP-E-SF-UV 50 Diameter: 50 mm Packaging: 25 m per bundle Special feature: cable protection conduit with additional UV protection All items are available for immediate delivery. Partial orders are also possible.

Condition: ready for operation (used), Year of construction: 2016, A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible. Rcodpfsvripyox Airjh

Condition: used, Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 25 rpm -Power: TA = 8 Nm -Construction: B5 Rcodpfxjc Uz H Do Aireh -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 360/140/H185 mm -Weight: 14.4 kg

Year of construction: 2023, condition: used, The "Rest Wind" machine is an electrically powered winding machine used for the controlled winding of residual materials onto a winding core. The machine is designed to collect material remnants from production or processing operations in a clean and uniform manner. The material is guided through guide rollers and wound onto the winding mandrel. The electric drive enables consistent winding at an adjustable speed. The machine features a control cabinet with start/stop function, main switch, emergency stop, and control indicators. Rcodpfx Aijzr I Azersh The machine can be inspected in 06502 Thale by appointment.

Year of construction: 1985, condition: ready for operation (used), 2 SAHM precision cross winders type 260 are offered. Year of manufacture 1985 and 1998. Each machine has 2x 96 positions 192 positions total, plus 10 additional reserve heads, total 202 positions. Traverse stroke: 13inch approx. 330mm. Mandrel diameter for sleeves: 3 1/4inch approx. 82.5mm. Inspection by appointment possible. The machines are not located in Europe. Rcodpfx Aieyk Hclsrjh