Used Window Manufacturing for sale (48,403)

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Test Chamber Manufacturer: CTS GmbH Model: T-70/600 Year of manufacture: 10/2018 Machine type: Temperature test chamber Test chamber volume: approx. 600 liters Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature test chamber from 2018. This air-cooled, stand-alone unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, and development and stress tests. The stainless steel test chamber has a volume of approximately 600 liters. Technical data: Manufacturer: CTS GmbH, Hechingen Model: T-70/600 Year of manufacture: 10/2018 Test chamber volume: approx. 600 liters Design: Stand-alone unit, air-cooled Temperature range: -70 °C to +210 °C Temporal temperature stability: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 4.03 K/min Cooling rate: approx. 3.17 K/min CE marking present Electrical data: Rated voltage: 400 V / 3/N / 50 Hz Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t GWP: 14,800 Operating pressure PS: 25 bar Test pressure PT: 27.5 bar Dimensions and weight: Internal test chamber (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air using Pt100 Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Lateral cable entry Lockable door latch Mobile design with rollers Test chamber and condensate drain Workshop inspection: Functional test performed Electrical connection and phase sequence tested Heating and cooling function tested Speed test performed LAN communication and buffer battery tested Inspection seal applied Note: This unit is a temperature test chamber. Humidity control is not available. Condition: Used Bodpfx Abezmqx Istedg Optical condition as shown in the pictures Normal signs of wear and tear due to age and use Scope of delivery: CTS T-70/600 temperature test chamber Operating manual and technical documentation Test and workshop documents Accessories as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via freight forwarder possible. Loading possible with a forklift. Subject to changes, errors and prior sale.

Condition: reconditioned (used), Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control panel was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Bsdpoxpi Dusfx Abtjdg Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Condition: good (used), BIHLER GRM100 multislide punching and forming machine, Made in Germany. Machine re-engineered in year 2010 originally by Bihler, updated with servo motor, pump, rewired, new control, etc. Equipped with 4x forming slides and 18 ton press station. Gripper feed on right-hand side with straightener. Max width of strip 100 mm. Max wire diameter 10 mm. Standard feed length 250 mm max. Max operating speed 135 strokes per minute approx. Servo motor. Touch screen control. Air clutch. Bdsdpfxjpm H Haj Abtjg Weight cca. 6000 kg. Power supply 400/480V, 50 Hz. On stock more Bruderer, Schaal, and Mabu high speed presses. Also Ideal flash butt welding machines.

Condition: new, Long Reach Boom & Arm for Excavators – Custom Made up to 22 m | Dredging, Canal Cleaning & Deep Excavation | Galen Manufacturer Custom-built long reach boom and arm systems manufactured by Galen for excavators that need extended digging depth and reach. Our long reach excavator boom is engineered for dredging, river and canal cleaning, pond and reservoir maintenance, deep foundation and basement excavation, slope profiling and embankment work – any job where a standard boom simply cannot reach far or deep enough. We manufacture long reach booms made to order, with reach up to 22 m and beyond, built from Hardox and Strenx high-strength steel for the best balance of reach, durability and weight. Each long reach boom-arm system is produced with full structural calculation, so that machine stability, hydraulic flow and bucket capacity are correctly matched to the extended geometry. The result is a properly balanced long reach system – not just a longer arm – that works safely at full extension. Supplied as a complete long reach boom + arm conversion or as individual sections, including correct hydraulic piping, cylinders and counterweight recommendations. We produce for all major excavator brands and models – Caterpillar, Komatsu, Hitachi, Volvo, Hidromek, Hyundai, Doosan, Liebherr and others – with mounting matched to your exact machine. Typical applications: dredging and waterway maintenance, canal and ditch cleaning, deep excavation, lake and pond work, slope and embankment shaping, and reach work over water or soft ground. As a manufacturer (not a reseller), Galen offers fully custom geometry, OEM/private-label production, engineering support, and export to Gulf, Balkan, Central Asian and European markets. CE-compliant production available on request. Why choose Galen long reach boom-arm: Bdjdezfwdbopfx Abteg Custom reach engineered to your machine – up to 22 m+ Hardox & Strenx construction: high strength, low added weight Engineered for stability – balanced geometry, correct hydraulics & counterweight advice Complete long reach system or individual boom/arm sections For dredging, canal cleaning and deep excavation Manufacturer pricing, structural support, worldwide shipping Send us your excavator brand, model, operating weight and target reach, and we will engineer a long reach boom-arm system sized exactly to your machine.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, wire diameter (max.): 10 mm, The BLM GROUP E-FLEX is a fully automatic, all-electric, single-head CNC wire-bending machine designed to produce complex 3D wire parts directly from a coil. Key Capabilities Full Automation: It processes wire directly from a spool, seamlessly performing inline operations like straightening, cutting, chamfering, and bending.Dual-Direction Bending: The bending head features a double turret capable of rotating both clockwise and counter-clockwise. This layout allows it to use multiple bending technologies simultaneously to avoid impossible geometries. Continuous Operation: Engineered with a small physical footprint and all-electric axes, it is optimized for non-stop, 24/7 industrial manufacturing. Technical Specifications The system is built to handle heavy production environments with the following configurations: Parameter Specification Bending CapacityUp to Ø 8 mm (with Wire R=900 N/mm²) or Ø 10 mm (with Wire R=500 N/mm²)Control System5 CNC axes Bsdpfxjzu Auwj Abtedg Bending Angle0.1° to 240°Bending Radius 0.5 mm to Infinite Coiler Capacity Up to 1,500 kg Power Consumption22 kW maximum installed power (8 kW average drawn power)Machine Weight2,400 kg (5,291 lbs)

Condition: used, Year of construction: 2016, max. workpiece length 4500 mm profile spindle 1 Stück Bdsdpfx Aezn Ahwjbteg main drive 19,2 kW

Condition: excellent (used), Walter+Bai LFV100-HH Servo-Hydraulic Universal Testing Machine Manufacturer: Walter+Bai AG, Switzerland Type: LFV100-HH Year of Manufacture: 2019 Machine Type: Servo-Hydraulic Universal Testing Machine / Material Testing Machine Testing Force: 100 kN For sale is a used servo-hydraulic universal testing machine from Walter+Bai AG, including hydraulic power unit PAC-40, PCS8000 Digital Controller, industrial PC, original Walter+Bai testing software, software dongle, GTM load cell, and extensive accessories. The system is suitable for professional tensile, compressive, material, and component testing in testing laboratories, research and development, quality assurance, and industrial production. The original Walter+Bai testing software, the corresponding software dongle, and the industrial PC are included in the scope of delivery. This provides a complete operating and evaluation system for the testing machine. Technical Data: Manufacturer: Walter+Bai AG, Switzerland Model: LFV100-HH Machine Type: Servo-Hydraulic Universal Testing Machine Series: LFV 100 kN Factory Number: 2279 Order Number: K25788 Year of Manufacture: 2019 Maximum Testing Force: 100 kN Control: Walter+Bai PCS8000 Digital Controller Digital testing machine control Original Walter+Bai testing software available Original software dongle available Industrial PC included in the scope of delivery Load Cell: Manufacturer: GTM Testing and Metrology GmbH Bjdpfxszlz Rxj Abtjdg Type: DR-F Measuring Range: 125 kN Sensitivity: 2 mV/V Serial Number: 68134 Year of Manufacture: 2019 Made in Germany Hydraulic Power Unit: Manufacturer: Walter+Bai AG Type: PAC-40 Factory Number: 2279-1 Year of Manufacture: 2019 Servo-hydraulic hydraulic power unit Water-cooled design Designed for continuous operation PCS8000 Digital Controller mounted Dimensions: Testing Machine (W × D × H): approx. 1,150 × 850 × 2,650 mm Hydraulic Power Unit PAC-40 (W × D × H): approx. 800 × 700 × 1,150 mm Overall transport dimensions (L × W × H): approx. 1,600 × 1,100 × 2,800 mm Weight: Testing Machine: approx. 1,350 kg Hydraulic Power Unit PAC-40: approx. 250 kg Total weight: approx. 1,600 kg Shipping weight: approx. 1,850 kg Clamping System: 2 × mechanical wedge clamping heads Walter+Bai WGR-100-M Several sets of clamping jaws Clamping and mounting accessories as shown in the pictures Equipment: Walter+Bai LFV100-HH Universal Testing Machine Walter+Bai PAC-40 Hydraulic Power Unit Walter+Bai PCS8000 Digital Controller Industrial PC Original Walter+Bai Testing Software Original Software Dongle GTM Load Cell 125 kN 2 × mechanical wedge clamping heads WGR-100-M Several sets of clamping jaws Handheld control unit Separate control unit with emergency stop Testing and mounting accessories as shown in the pictures Condition: Used Year of Manufacture 2019 Optical condition as shown in the pictures. Scope of Delivery: Walter+Bai LFV100-HH Universal Testing Machine Walter+Bai PAC-40 Hydraulic Power Unit Walter+Bai PCS8000 Digital Controller Industrial PC Original Walter+Bai Testing Software Original Software Dongle GTM Load Cell 125 kN 2 × mechanical wedge clamping heads WGR-100-M Sets of clamping jaws Handheld control unit Control unit Further accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: excellent (used), functionality: fully functional, Complete machinery set for sale, consisting of: Holzher machinery set, like new (in operation since 06/2024), consisting of: Tectra 6120 Dynamic beam saw, automatic panel storage system Storemaster 5110 (approx. 12 x 18 m) Evolution 7450 vertical machining center Nextec 7705 nesting machining center Weinig Dimter Opticut S60 optimizing miter saw (year of manufacture 2009) including waste conveyor (new, in operation since 06/2024) Nestro dust extraction system (in operation since 06/2024) consisting of: filter tower 11 kW + 7.5 kW (15,000 m³/h) briquetting press shredder piping for all machines, various pipe diameters Mobile dust extraction unit Holzkraft RLA160 2x mobile dust extraction units ASA2553 or similar 2x Renner compressors, each 7.5 kW (1 of which is new and in operation since 06/2024) Bedpfx Aezh Hw Asbtjdg 1x Ayen multi-spindle drilling machine, custom-built, with a 2.5 m stop rail 1x Cesab B625 electric forklift, 2.5 tons (year of manufacture 2014) 2x electric high-lift pallet trucks, Toyota/BT (year of manufacture) 3x electric high-lift pallet trucks, Cesab, including initial lift (year of manufacture 2025) Various workbenches, templates, pallet racking, material trolleys, etc. BeA various nailers and staplers Various electric power tools, vacuum cleaners from Festool, Bosch Professional, etc. Benchtop drill press Stürmer Festool table saw Bosch large panel miter saw on stand EUR 530,000,- net (Total price EXW (ex works) for self-dismantling/collection) If you are seriously interested, pictures and details of the individual items can be provided.

Condition: excellent (used), Year of construction: 2024, Stäubli TS2-40 SCARA industrial robot with CS9 controller and SP2 teach pendant Manufacturer: Stäubli Model: TS2-40 Robot year of manufacture: 02/2024 Controller year of manufacture: 02/2024 Machine type: 4-axis SCARA industrial robot Controller: Stäubli CS9-TS2-40 Bdedezlry Rspfx Abtsg For sale is a used Stäubli TS2-40 SCARA industrial robot including CS9-TS2-40 robot controller, SP2 teach pendant and original robot connection cable. The compact robot system was designed for fast and precise pick-and-place, assembly, handling, and automation tasks. The system is suitable for, among other things, electronics manufacturing, machine assembly, packaging technology, laboratory automation, quality assurance, and general industrial applications. Technical data: Model: TS2-40 Robot type: SCARA robot Number of axes: 4 Robot year of manufacture: 02/2024 Reach: 460 mm Rated payload: 2.4 kg Maximum payload: 8.4 kg Z-axis stroke: 200 mm Repeatability XY: ±0.01 mm Repeatability Z: ±0.004 mm Repeatability Rz: ±0.002° Mounting type: Floor mounting Performance data: Maximum speed axis 1: 550°/s Maximum speed axis 2: 720°/s Maximum speed axis 3: 2,500 mm/s Maximum speed axis 4: 2,500°/s Cycles per minute: up to 240 Energy consumption according to VDMA 24608: approx. 0.397 kW Controller: Manufacturer: Stäubli Type: CS9-TS2-40 Controller: CS9 Controller year of manufacture: 02/2024 Controller version: Rack controller Teach pendant: SP2 Power supply: 1 × 230 V AC / 50–60 Hz Connection power: 1,700 VA Communication: Ethernet / PROFINET Device Software: VAL 3 activated Handheld device: Manufacturer: Stäubli Model: SP2 Version: Teach pendant / handheld device Touchscreen color display Integrated emergency stop switch Operation and programming of the robot system Power supply: 24 V DC / 0.5 A Date of manufacture: 11/2023 Connections: Controller power supply: 1 × 230 V AC / 50–60 Hz Power consumption: 1,700 VA PROFINET Device Ethernet Digital inputs and outputs Pneumatic connections on the robot Equipment: Stäubli TS2-40 SCARA robot Stäubli CS9-TS2-40 robot controller Stäubli SP2 teach pendant Original robot connection cable Pneumatic and electrical connections in the robot arm Ethernet interface PROFINET interface VAL-3 programming system Tool mounting according to images Accessories according to images Dimensions: Robot dimensions (W × D × H): approx. 400 × 300 × 650 mm Controller CS9 dimensions (W × D × H): approx. 600 × 500 × 270 mm Teach pendant SP2 dimensions (W × D × H): approx. 290 × 180 × 90 mm Maximum reach: 460 mm Z-axis stroke: 200 mm Shipping data: Robot weight: approx. 38 kg Controller weight: approx. 30 kg Total weight without additional accessories: approx. 68 kg Shipping dimensions complete (W × D × H): approx. 1,200 × 800 × 700 mm Shipping on a pallet recommended Condition: Used Year of manufacture 2024 Optical condition according to images. System start and information menus were tested. Robot system including controller and SP2 teach pendant. Scope of delivery: Stäubli TS2-40 SCARA industrial robot Stäubli CS9-TS2-40 controller Stäubli SP2 teach pendant Original robot connection cable Tool mounting Accessories according to images Availability: upon agreement. Scope of delivery as shown in the images. The table shown in the photos is not part of the sale. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2023, Stäubli TS2-40 SCARA Industrial Robot Manufacturer: Stäubli Faverges SCA Type: TS2-40 Robot Year of Manufacture: 03/2023 Machine Type: 4-Axis SCARA Industrial Robot Controller: Stäubli CS9-TS2-40 For sale is a used Stäubli TS2-40 SCARA industrial robot with CS9 controller. This compact robot system has been designed for fast and precise pick-and-place, assembly, handling, and automation tasks. The system is suitable, among other applications, for electronics manufacturing, machine assembly, packaging technology, laboratory automation, quality assurance, and general industrial applications. Technical Data: Manufacturer: Stäubli Faverges SCA Model: TS2-40 Robot Type: SCARA Robot Number of Axes: 4 Robot Year of Manufacture: 03/2023 Reach: 460 mm Rated Payload: 2.4 kg Maximum Payload: 8.4 kg Z-Stroke: 200 mm XY Repeatability: ±0.01 mm Z Repeatability: ±0.004 mm Rz Repeatability: ±0.002° Mounting Type: Floor Mounting Performance Data: Maximum Speed Axis 1: 550°/s Maximum Speed Axis 2: 720°/s Maximum Speed Axis 3: 2,500 mm/s Maximum Speed Axis 4: 2,500°/s Cycles per Minute: up to 240 Power Consumption according to VDMA 24608: approx. 0.397 kW Controller: Manufacturer: Stäubli Type: CS9-TS2-40 Controller: CS9 Controller Year of Manufacture: 03/2023 Controller Version: Rackable Supply: 1 × 230 V AC / 50–60 Hz Connection Power: 1,700 VA Communication: Ethernet / PROFINET Device Software: VAL 3 activated Equipment: Stäubli TS2-40 SCARA Robot Stäubli CS9-TS2-40 Robot Controller Original Robot Connection Cable (Robot ↔ Controller) Pneumatic and Electrical Connections in Robot Arm Ethernet Interface PROFINET Interface VAL-3 Programming System End-of-Arm Tooling according to Images Accessories according to Images Dimensions: Bodpfxezlq E Se Abtjdg Maximum Reach: 460 mm Z-Stroke: 200 mm Dimensions CS9 Controller (H × W × D): approx. 270 × 445 × 365 mm Shipping Data: Robot Weight: approx. 38 kg Controller Weight: approx. 30 kg Total Weight: approx. 68 kg Shipping Dimensions on Pallet (W × D × H): approx. 1,200 × 800 × 700 mm Condition: Used Year of Manufacture: 2023 Optical Condition according to Images. System start-up and information menus have been tested. A teach pendant is not included in the scope of supply. Scope of Supply: Stäubli TS2-40 SCARA Industrial Robot Stäubli CS9-TS2-40 Controller Original Robot Connection Cable (Robot ↔ Controller) End-of-Arm Tooling Accessories according to Images Scope of supply as shown in the images. The table shown in the photos, as well as any other items not expressly mentioned, are not included in the sale. Subject to change, errors and prior sale.

Condition: excellent (used), functionality: fully functional, mileage: 1,60,000 km, first registration: 06/2016, fuel type: diesel, overall weight: 2,743 kg, fuel: diesel, color: white, emission class: euro5, number of seats: 6, Year of construction: 2016, Equipment: ABS, air conditioning, airbag, fog lights, sliding door, Fiat Scudo 6 seats Year 06/2016 Diesel 6-speed manual gearbox + reverse Engine displacement 1,997 cc Bdodpfx Aboyir U Rjtog 94 kW (130 HP multijet) Euro 5B Payload capacity 826 kg Gross vehicle weight 2,743 kg Overall length 4,813 mm Air conditioning ABS Electric mirrors and windows 12-month engine and gearbox warranty 160,000 km.

Condition: excellent (used), Year of construction: 2024, Stäubli TS2-40 SCARA Industrial Robot Manufacturer: Stäubli Faverges SCA Type: TS2-40 Robot Year of Manufacture: 05/2024 Machine Type: 4-Axis SCARA Industrial Robot Controller: Stäubli CS9 For sale is a used Stäubli TS2-40 SCARA industrial robot with CS9 controller and SP2 handheld device. This compact robot system is designed for fast and precise pick-and-place, assembly, handling, and automation tasks. The system is suitable for various applications, including electronics manufacturing, machine loading, packaging technology, laboratory automation, quality assurance, and general industrial applications. Technical data: Manufacturer: Stäubli Faverges SCA Model: TS2-40 Robot type: SCARA robot Number of axes: 4 Robot year of manufacture: 05/2024 Reach: 460 mm Rated payload: 2.4 kg Maximum payload: 8.4 kg Z-axis stroke: 200 mm Repeatability XY: ±0.01 mm Repeatability Z: ±0.004 mm Repeatability Rz: ±0.002° Mounting type: Floor mounting Performance data: Maximum speed axis 1: 550°/s Maximum speed axis 2: 720°/s Maximum speed axis 3: 2,500 mm/s Maximum speed axis 4: 2,500°/s Cycles per minute: up to 240 Power consumption according to VDMA 24608: approx. 0.397 kW Controller: Manufacturer: Stäubli Type: CS9-TS2-40 Controller: CS9 Controller year of manufacture: 04/2024 Controller version: Rackable Power supply: 1 × 230 V AC / 50–60 Hz Connected power: 1,700 VA Communication: Ethernet / PROFINET Device Software: VAL 3 activated Handheld device: Manufacturer: Stäubli Model: SP2 Touchscreen color display Integrated emergency stop switch Operation and programming of the robot system Power supply: 24 V DC / 0.5 A Equipment: Stäubli TS2-40 SCARA robot Stäubli CS9 robot controller Stäubli SP2 handheld device Robot and connection cables Pneumatic and electrical connections in the robot arm Ethernet interface PROFINET interface VAL-3 programming system Gripper mounting according to images RoboticsControls software / DVD Technical documentation Dimensions: Maximum reach: 460 mm Z-axis stroke: 200 mm Dimensions CS9 controller (H × W × D): approx. 270 × 445 × 365 mm Condition: Used Year of manufacture 2024. Optical condition according to images. Scope of delivery: Bsdpfx Ajzlhvuebtedg Stäubli TS2-40 SCARA industrial robot Stäubli CS9 controller Stäubli SP2 handheld device Robot cable and connection cables RoboticsControls software / DVD Technical documentation Accessories according to images Scope of delivery as shown in the pictures. The table shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Subject to changes, errors and prior sale.

Condition: used, Tenoning spindle 2 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set ----- Optionally available (at an additional cost): IV 68 Wood, Wood/Aluminum IV 78 Wood, Wood/Aluminum IV 68 Entrance Doors Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 10 NC Window System ----- Cross-cut Saw ----- with laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal bottom rounding unit ----- Axial adjustment travel: mechanically coupled with cut-off saw 1st Tenoning and Slotting Spindle ----- Motor power (with brake): 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position (below table): 5–10 mm Radial adjustment travel: fixed 2nd Tenoning and Slotting Spindle ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 320 mm Axial adjustment travel: NC axis Radial adjustment travel: NC axis Home position (below table): 5–10 mm 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm 2nd Profiling Spindle Bedpfszawizjx Abtedg ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Horizontal Profiling Unit (Top) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Max. tool cutting circle: 130 mm Pneumatic adjustment: 8 positions (axial and radial) 3rd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Vertical Profiling Unit (Right, at Machine End) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 160 ...

Condition: used, Year of construction: 2020, max. workpiece length 3740 mm profile spindle 1 Stück main drive 15 kW Control CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center to be sold on behalf of our customer ----- - From a wood window manufacturing company. - Machine still connected and ready for demonstration - Without machining tools Technical description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Travel: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in the X direction, 5 spindles in the Y direction, grooving saw in the X direction) Horizontal drilling unit with 6 spindles, 4 spindles in the X direction and 2 spindles in the Y direction. 1 groove saw in the X direction, max. diameter 120 mm - Tool changer with 24 tool positions on the right side of the machine stand max. workpiece diameter 240 mm max. tool height 370 mm - Tool changer for circular saw blade mounted on the boom/tool changer Bedpfxsyq Szts Abtodg max. saw blade diameter 350 mm - Tool changer on the left side of the machine stand with 10 tool positions. Max. workpiece diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - 24-position tool changer mounted on the boom, moving in the X-direction Max. workpiece diameter 240 mm Max. tool height 370 mm - Moving pick-up area for chip deflector plate - 6 workpiece supports with s-motion position control - 2 machining areas for pendulum machining - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved machining - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - "WoodFLash" software Lamello Clamex P Macro Notching Macro software - "Greenline package" for reduced energy consumption ----- Price of the above machine on Inquiry! ----- NOTE VIDEO: Not an original video. The video is from the machine manufacturer and shows a machine of this type. (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Condition: new, max. workpiece length 4500,6000 mm profile spindle 3 Stück main drive 24 kW Control Siemens 840d Working Process Logos Life Evo XS 2345 ----- Vollautomatisches CNC-Fensterfertigungsanlage mit automatischer Be- und Entladung. 2 Portale mit 3 Frässpindeln mit 4- und 5-Achstechnologie CNC-gesteuerter Manipulator für Werkstückpositionierung mit 16 Stück Doppelzangen 8 Stück komplett unabhängige Werkstückspanner für höchste Felxibilität und Produktivität 128 Werkzeugplätze NEU: Working Process baut nun auch 1-spindlige Anlagen mit bewährter Technologie für kleinere Betriebe! Bodpfx Aeyrtyyjbtodg Nebenstehend finde Sie aktuelle Videos dieser Baureihe.

Condition: used, Tenoning spindle 1 0 Number of milling agregates 2 St. Spindle diameter 40,50 mm Item 1: Okoma UF1 S Angle Combination Unit and Item 2: UF2 EG Rebating Machine, Bdodpfx Abjy T R Tbsteg incl. Item 3: Tooling Set for IV78 Timber Windows, IV78 Timber Entrance Doors, and IV78 Timber-Aluminum Windows (Gutmann system) with straight and angled sash profiles For sale on behalf of a customer ----- Manufacturer's Technical Description: Item 1: Okoma UF 1 S Tenoning and Profiling Machine / Rebating Machine ----- Compact, heavy-duty automatic window machine featuring a cast-iron construction, consisting of: Top-mounted cross-cut saw with 12-position turret stop system; Positive-guided saw guard for accident prevention Tenoning spindle: 40 mm diameter x 252 mm length; 2-step stroke mechanism for 3 tool positions (stroke height: 83 mm); Motor: 7.5 kW Sliding table: Adjustable on both sides from 0 to 60 degrees Automatic feed system with various infinitely variable speed settings; dual pneumatic clamping system; Length stop (LAS) with 3-position system, 2300 mm capacity Automatic transfer unit to the profiling section Profiling spindle: 40 mm diameter x 252 mm length Pneumatic stroke: 112 mm (adjustable) for 2 tool positions Motor: 7.5 kW; Spindle horizontally adjustable relative to the tool cutting edge; Adjustable front milling fence jaw Glazing bead saw with 3 kW motor and 4-position turret head adjustment; Heavy-duty articulated feed system, infinitely variable from 0 to 25 m/min. adjustable, Roller groups pivotable inward and outward Counter-stop with 5-position turret head Frame milling unit ----- Item 2: OKOMA Automatic Rebating Machine, Model UF 2 EG ----- Power Specifications: - Operating voltage: 3-phase, 380 V, 50 Hz - Compressed air: Air requirement: 13 NL/min; Operating pressure: 8 bar Conditioned air: According to Pneurop 6611 1. Profiling Spindle 1: - Spindle arrangement: Right - Power: 11 kW - Speed: 7000 rpm - Direction of rotation: Climb and conventional milling - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - Vertical (U-axis) movement of the profiling spindle - Vertical positioning: Actuation: Pneumatic cylinder; 90 mm stroke for 3 tool positions Position sensor: Limit switches - Horizontal positioning: Actuation: Pneumatic cylinder (forward/backward) Position sensor: Limit switches - Automatic plunge mechanism: Plunge speed adjustable to ensure tear-out-free rebating - Safety and dust extraction hood with 140 mm diameter connection port 2. Profiling Spindle 2: - Spindle arrangement: Right - Power: 11 kW - Speed: 7000 rpm - Direction of rotation: Counter-rotation - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - U-axis movement of the profiling spindle - Vertical positioning: Drive: Pneumatic cylinder; 90 mm stroke for 3 tool positions Position sensor: Limit switches - Horizontal positioning: Drive: Pneumatic cylinder (forward/backward) Position sensor: Limit switches - Safety and dust extraction hood with connection port (140 mm diameter) 3. Hardware Routing Unit EG: - Spindle arrangement: Right - Drive: 3 kW three-phase motor - Speed: 6000 rpm - Spindle diameter: 30 mm - Usable length: 47 mm - Vertical positioning: None - Horizontal p...

Condition: used, Year of construction: 2020, operating hours: 38,709 h, machine/vehicle number: IntNr231545, Bdjdpfezidmkox Abtog

Condition: excellent (used), EOS P 396 Laser Sintering System Manufacturer: EOS GmbH Type: P 396 Machine Type: Industrial SLS laser sintering system for plastic components Process: Selective Laser Sintering (SLS) For sale is a professional, industrial laser sintering system from EOS GmbH. The system was developed for the additive manufacturing of plastic components using the Selective Laser Sintering process and is suitable for prototyping, small-series production, research and development, as well as industrial production applications. Technical Data Technology: Selective Laser Sintering (SLS) Usable build volume: 340 x 340 x 600 mm Build rate: up to 48 mm/h (material-dependent) Layer thicknesses: 0.06 mm 0.10 mm 0.12 mm 0.15 mm 0.18 mm Laser system: CO₂ laser Laser power: 70 W F-Theta precision optics Scanning speed up to 6 m/s Laser class 1 Voltage: 400 V 3~ / N / PE Frequency: 50 / 60 Hz Rated power: 10 kW Current draw: 16 A Fuse rating: 32 A Supply: Integrated nitrogen generator External nitrogen connection available Compressed air supply required: at least 10 m³/h at 5,000 hPa Software EOS PSW EOS RP Tools EOSTATE Interfaces STL Ethernet Certifications CE NFPA EN 60825-1:2007 Maintenance Condition Current service and maintenance records are available. According to the available service reports, the following work has been carried out, among others: Heating elements replaced Roller belt replaced X-axis and carriage cleaned Laser window and mirrors cleaned Seals replaced Safety circuits checked Docking Station / Powder Supply Bjdpfezarg Ujx Abtedg Docking station with pneumatic conveying system for automated powder supply to the laser sintering system. Manufacturer: HYDAC Cooling GmbH Type: FWKS-G2-001500-W-W-R25-2-IW-UL Electrical data: 230 V ±10 % 1 PH / 50-60 Hz Max. current draw: 8.0 A ICC / SCCR: 10 kA CE / RoHS Additional Equipment Control panel Docking station Pneumatic conveying system 2 x EOS Multibox Capacity per Multibox: approx. 230 liters For storing, collecting, and transporting fresh and used powder. Dimensions and Weight System including control cabinet: approx. 1,840 x 1,175 x 2,100 mm Control panel: approx. 950 x 700 x 1,550 mm Total weight of laser sintering system: approx. 1,400 kg Recommended installation space: at least 4.3 x 3.9 x 3.0 m Areas of Application Additive Manufacturing Rapid Prototyping Small-Series Production Automotive Industry Mechanical Engineering Aerospace Medical Technology Research and Development Scope of Delivery EOS P 396 Laser Sintering System Control panel Docking station 2 x EOS Multibox Available documentation Service reports Accessories and components as shown in the pictures Condition Used Machine from industrial use Optical condition as shown in the pictures Scope of delivery as shown Inspection and testing on site possible and expressly desired after prior appointment. Shipping or freight forwarding possible. Availability: upon agreement. Scope of delivery as shown. Changes and errors in the technical data as well as prior sale are reserved.

Condition: excellent (used), Mitutoyo Type: QS250Z Mitutoyo QS250Z CNC Vision Measuring Machine – Year of manufacture: 2017 – incl. software & accessories For sale is a high-quality Mitutoyo QS250Z CNC vision measuring machine from 2017, in excellently maintained condition. This is a precise optical coordinate measuring machine for non-contact measurement of workpieces. Ideal for quality assurance, incoming goods inspection, production, precision engineering, electronics, plastics technology, and much more. What can the device do? The QS250Z is a CNC-controlled optical measuring machine for: - 2D coordinate measurement - Contour and profile measurement - Distance, radius, angle, and diameter determination - Measurement of bores, grooves, edges, and complex geometries - Serial measurements with automated measurement programs - Documentation and report generation via Mitutoyo software Bdjdpfxjynkbae Abtsg Measurement is non-contact via a high-resolution camera system with image processing. Ideal for sensitive or small parts where tactile measurement is unsuitable. Thanks to CNC control, automated measurement procedures are possible – perfect for recurring testing processes. Technical data: Model: Mitutoyo QS250Z Machine type: CNC Vision Measuring Machine Year of manufacture: 2017 Code No.: 359-508-10Y Manufacturer: Mitutoyo Corporation, Japan Electrical data: 200–240 V AC 50/60 Hz Power consumption: approx. 500 W Fuse: 250V T 2.5A Dimensions (approx.): Width: approx. 700–800 mm Depth: approx. 900 mm Height: approx. 1,100 mm Weight (approx.): 150–200 kg Important notice: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) - Mitutoyo QS250Z main unit - Joystick box - Software package: - QS-ConfigDisk - QSPAK - FORMTRACERPAK-AP - MiCAT Vision / Form - Manuals & documentation - Various electronic boards (see pictures) - Further accessories as shown (Technical data and information subject to change and error!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2020, ACSYS Bsdpfxeyi Twgs Abtjdg Model: BARRACUDA® Custom Dual FL70S ACSYS Laser Processing System BARRACUDA® Custom Dual FL70S Fiber Laser – Industrial Laser System – Year of Manufacture 2020 For sale is a high-quality ACSYS laser processing system, model BARRACUDA Custom Dual FL70S, manufactured in Germany. The machine is in a very well-maintained condition and is a professional industrial system for precise laser marking, engraving, and material processing. The system is equipped with two air-cooled fiber lasers (2×70 W), making it ideal for series production, industrial marking, engraving, labeling, and processing of complex components. Thanks to its stable granite axis construction and fully enclosed safety cabin, the machine operates with the highest precision, reliability, and safety (Laser Class 1). Perfect for use in industry, metalworking, automotive suppliers, toolmaking, electronics, nameplates, DataMatrix codes, barcodes, serial numbers, and much more. Capabilities: - High-precision laser engraving and laser marking on metal and various materials - Series marking, nameplates, QR / DataMatrix codes, logos, numbering - Processing large layouts without misalignment (Large Field Removal Option) - 3D component processing possible - Camera positioning system for precise workpiece alignment - Automated processes / industrial integration possible (PLC, network, USB) - Low-maintenance, air-cooled fiber lasers with long service life - Fully enclosed, safe industrial system (Laser Class 1) Features / Options: - Camera system LAS – Live Adjust System HD - Large Field Removal (LFR) – processing large fields without misalignment - Industrial PC control with ACSYS Software Suite - Network / USB / PLC connectivity - Automatic door & safety monitoring - Lighting & signal beacon - Air-conditioned control cabinet - Fume extraction and filtration system for laser fumes - Extraction and filter unit (ULT LAS 1500) - Max. airflow: 3,240 m³/h - Nominal airflow: 1,200 m³/h - Max. negative pressure: 3,450 Pa - Power consumption: approx. 2.2 kW - Weight: approx. 300 kg Technical Data: Machine - Manufacturer: ACSYS Lasertechnik GmbH (Made in Germany) - Model: BARRACUDA® Custom Dual FL70S - Year of manufacture: 04/2020 - Laser: 2 × Fiber laser, 70 watts each (air-cooled) - Wavelength: 1055 – 1070 nm - Processing area: approx. 570 × 570 mm - Travel path: - X: approx. 875 mm - Y: approx. 600 mm - Z: approx. 190 mm Electrical Data: - Connection: 3AC / N / PE 400 V - Frequency: 50 Hz - Power consumption: approx. 5.5 kW Dimensions & Weight: - Cabin width: approx. 2050 mm - Cabin height: approx. 2300 mm (with signal beacon approx. 2600 mm) - Cabin depth: approx. 2850 mm - Total machine weight: approx. 3,800 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We are happy to answer further questions by phone.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, ATM Model: ATM Brillant 255 ATM Brillant 255 Cut-off Machine 400V Metallography Laboratory 2019 Description: For sale is a professional cut-off machine ATM Brillant 255 – Year of manufacture 04/2019 Industrial unit designed for precise material sectioning in metallography, laboratory, and materials testing applications. The machine comes with a base cabinet and integrated coolant system. Several suitable cut-off wheels are included (see photos). Very robust professional quality Bjdpfxszizp As Abtodg Technical Data (as per nameplate): Model: Brillant 255 Year of manufacture: 04/2019 Manufacturer: ATM GmbH Electrical Data: Voltage: 400 V (three-phase) Frequency: 50 Hz Power: 12.5 kVA Fuse protection: 32 A Mechanical Data: Cut-off wheel: Ø 400 mm Max. wheel speed: approx. 3050 rpm Wheel bore: 32 mm The machine is mounted on a base cabinet with coolant tank Dimensions: Width: approx. 120 cm Depth: approx. 80 cm Height: approx. 150 cm Weight: approx. 450 kg Condition: Used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors!) For further questions, please feel free to contact us by phone.

Condition: new, Year of construction: 2026, functionality: fully functional, year of last overhaul: 2026, funnel diameter: 950 mm, rotor diameter: 950 mm, Set of shredding shafts, NEWly manufactured. These shafts are available with various blade configurations. The following are currently available: Size Hammel 450 / 650 / 750 / 850 / 950 or Arjes 750 | 850 | Impaktor 250 | Titan 900 or Lindner U-75 | U-4000 | U-95 From 5 to 11 knives per support disc are possible, 5 to 12 support discs are possible. Bjdpfeiwxngjx Abtsdg You determine the degree of shredding, we determine the number of knives and discs for the shafts. We are also happy to accommodate your requests. Please include your company address and contact details in your inquiries. This will allow us to prepare a quote immediately and send it to your personal email address. sv p-rt com

Condition: used, functionality: fully functional, Various used rack milling cutters / rack group milling cutters from different manufacturers. Our asking prices are net, ex works, plus packaging costs, starting from €170. Individual prices as follows: Manufacturer: Arnold Dold GmbH & Co.KG Module 0.5 - Group milling cutter - Asking price €370 Module 0.7 - Group milling cutter - Asking price €380 Module 0.9 - TIN coating - Asking price €530 Module 1 - 2 units available - Group milling cutter - Asking price €390 Module 1.25 - Group milling cutter - Asking price €410 Module 1.5 - TIN coating - Asking price €750 Module 1.75 - Group milling cutter - Asking price €730 Module 2 - 4 flutes - one defect - 1.89 kg - Asking price €210 Module 2 - TIN coating - Asking price €770 Module 2.5 - 8 flutes - one defect - 13.52 kg - Asking price €470 Module 3 - one defect - 13.29 - Asking price €230 Module 3 - 7 flutes - Reground - 13.77 kg - Asking price €200 Module 3 - 3 flutes - Asking price €290 Module 3 - TIN coating - Asking price €520 Module 5 - 4 flutes - Reground - 12.15 kg - Asking price €170 Module 5 - 4 flutes TIN coating - Asking price €750 Module 6 - 3 flutes TIN coating - Asking price €760 Module 6 - 3 flutes TIN coating - Reground - 11.16 kg - Asking price €400 Module 7 - 3 flutes Reground - 11.41 kg - Asking price €430 Module 8 - 3 flutes Reground - 5.28 - Asking price €190 Module 8 - Reground - Asking price €450 Module 8 - TIN coating - Asking price €780 Module 10 - TIN coating - Asking price €790 Module 10 - Reground - Finished milling cutter - 0.515 kg - Asking price €320 Module 12 - 2 units - TIN coating - Finished milling cutter - Asking price €580 Module 13 - Finished milling cutter - Asking price €410 Module 14 - Reground - 5.18 kg - Asking price €240 Module 16 - Asking price €600 Module 16 - Reground - 5.14 kg - Asking price €300 Involute angle: 20° BPII-Ü Bore diameter [mm] 40; 50; Groove [mm] 10: 12 Width [mm] 32.5; 45.5; 44; 17/21; 16/20; 14/18; 21/25; 18/22; 65/73; 48/57; 31; 66/72; 69/77; 70/78; 60/64; 60/66; 82; 72/80; 82; 40; 39; 47; 52; 56; 64 Outer diameter [mm] 169; 140; 141; 200; 150; 198; 195; 199; 197; 201; 200; 219; 192; 191 Manufacturer: Saazor - Wälztechnik ZORN GmbH & Co. KG Module 1 - 16 flutes TIN coating - one defect - 10.18 kg - Asking price €510 Module 1 - 16 flutes TIN coating - Asking price €590 Module 1.5 - 9 flutes Group milling cutter 9 flutes - Asking price €560 Module 2 - Pin milling cutter - Asking price €390 Module 6 - Pin milling cutter - Asking price €640 Module 10 - TIN coating - Asking price €350 Involute angle 20° DIN 3972 II - Ü or DIN 3972 II Kl. A - Ü Bore diameter [mm] 40 Groove [mm] 10 Width [mm] 52/60; 55/85; 60/90; 33/40 Outer diameter [mm] 176; 200; 198; 199 Manufacturer: Klingelnberg Module 2.5 - Asking price €360 Module 2.75 - Asking price €380 Module 3.25 - Asking price €170 Module 3.75 - Asking price €200 Module 4.5 - Asking price €220 Involute angle 20° Bore diameter [mm] 40 Groove [mm] 10 Width [mm] 30/38; 28/36; 35/42; 39/47; 44/52 Outer diameter [mm] 148; 149; 150 Subject to typing and calculation errors. Sales are exclusively within the EU countries. Bdodpfoytrh Eex Abtjg

Condition: excellent (used), functionality: fully functional, Large fully hydraulic EISELE: Weight approx. 0.75 t, saw blade 440 mm Speeds: 12.5 / 25 rpm Bodpfxezpfgrs Abtsdg Motor power: 2.6 / 3.2 kW Hydraulic saw feed Hydraulic vice Cutting ranges: 200 x 100 mm (square tube) Mitre cut one-sided 45°.

Condition: new, Year of construction: 2026, Tenoning spindle 1 0 Number of milling agregates 3 St. Spindle diameter HSK, 50 mm mm Bjdpfey T R S Rsx Abtjdg control Maestro active windoor