Used Angular window machining centre for sale (35)

Condition: used, Year of construction: 2011, Tenoning spindle 1 Stk Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2784 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please inquire about additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 3,000 - 6,000 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3 kW > Adjustment range: radially pneumatically controlled to 8 positions, e.g., for edge rounding from above > Laser alignment light for detecting the sawn section Item 2: Rounding unit, horizontal, bottom ----- > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm mm > Spindle speed: 9,000 rpm > Maximum tool travel: 130 mm > Axial adjustment range mechanically coupled to cross-cut saw > Radial adjustment range pneumatically controlled on/off Cgshx D I Dewamqvs Ast Length stop NC-controlled ----- > Length 3,500 mm > Electronic length stop Item 3: Tenon and slotting spindle ----- > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, continuously adjustable, NC- controlled > Spindle speed: 3,500 rpm > Maximum tool travel: 320 mm > Spindle diameter: 50 mm > Maximum tool diameter: 320 mm > Motor power: 11 kW Item 4: 1st Profiling Spindle (Cylinder and Counter-rotation) ----- > Position: vertical right > Number of tools: 1 > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Maximum tool travel radius: 232 mm > Motor power: 11 kW Item 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, continuously adjustable, NC- controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Maximum tool travel radius: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatically controlled opposite the spindle, 2 positions Rung guide consisting of: Guide ruler in the stop (concurrent spindle area), Rung support bar from above in the area of ??the profile milling unit vertically on the right, and profiling spindle. Item 6: Profile milling unit, horizontal, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.8 kW > Speed: 9,000 rpm > Max. tool travel: 130 mm > Axial adjustment range: 30 mm, 8 positions > Radial adjustment range: 125 mm, 8 positions Item 7: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range: 115 mm, 8 positions > Radial adjustment range: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool travel: 210 mm > Motor power: 3.8 kW Item 8: Profile milling unit/grooving unit from below ----- > Motor power: 3.8 kW > Tool clamping length: 125 mm > Axial adjustment ra...

Condition: used, Year of construction: 2019, Workpiece length max: 3.000 mm Workpiece thickness max: 140 mm Number of tenoning spindles: 1 Number of moulding spindles: 2 Drilling aggregate: Yes Seperate fitting groove shaft: Yes Cutting glazing beads: Yes Length of tenoning spindle: 320 mm Length of profiling spindle: 320 mm Spindle diameter: 50 mm Spindle stroke stepless: Yes Radial spindle adjustment: pneumatic Controlled length stop: electronic Atelier window: Yes Mitre difference measure adjustment: Yes Equipped for outer profiling: Yes Splinter protection for outer profiling: Down-cut spindle Workpiece return: Inclined roller conveyor Main motor power: 11 kW Tool clamping system: HSK-85S SCM T-Set: Yes Tool set for window production: IV 54, IV 64, IV 74, IV 84, Holz-Alu Feedrate max: 10 m/min Continuously variable feed: Yes Control: PC control Cjhx D Iovrltno D Ajgt SCM Rotaten: Yes SCM Duo aggregate: Yes Profilsplitting: Yes SCM Jolly: Yes SCM OPTIMA 1: Yes Control: SCM CONTROL 100 PC Conformity marking: CE mark

Condition: used, Year of construction: 1985, Weight: approx. 3000 kg Dimensions: approx. 3700 x 2000 x 1600 mm Cjhxevvi Tto D I D Ajgt Storage location: Supplier

Condition: excellent (used), Year of construction: 1992, beautiful machine in good condition as it came from a small business with little use. Cgshx D I Dou S Afcs Aet with IV 68 tool is still in operation ready for demonstration

Condition: used, Year of construction: 2002, Technical data: Max. workpiece length (measured by stop) 4500 mm. Min. workpiece length (clearance) 200 mm. Max. workpiece height 150 mm Min. workpiece height 30 mm. Max. workpiece width 200 mm. Min. workpiece width 30 mm. Tenoning table feed speed 0-25 m/min. Profiler feed speed 4-20 m/min. TEENNING SECTION: Pos. 1 Saw unit: Motor power: 4 kW (5.5 HP) Speed: 3000 rpm. Spindle diameter: 40 mm. Max. saw blade/chipper diameter: 450 mm with arbor hole 80 mm Pos. 2 Penny shaft: Clamping length: 620 mm with shaft diameter 50 mm, equipped with upper bearing. Power: 11 kW (15 HP) Speed: 3500 rpm. Max. tool diameter: 370 mm. Stroke to under the machining table: 575 mm. Equipped with anti-splinter device: model JOLLY Free programming for vertical positioning: Adjustment 1 mtr./min. Pos. 3 Corner rounding unit: Power: 3 kW (4 HP) Speed: 6000 rpm. Shaft dimensions: 130 mm with shaft diameter 40 mm Electronically horizontally positionable. Pos. 3 under Corner rounding unit: Power: 3 kW (4 HP) Speed: 6000 rpm Axis dimension: 130 mm with 40 mm shaft diameter Electronic and vertical horizontal positionable. Free space Pos. 4 Pin shaft: Clamping length: 620 mm with 50 mm shaft diameter, equipped with top bearing Power: 7.5 kW (10 HP) Speed: 3500 rpm Max. tool diameter: 320 mm Stroke to under the machining table: 575 mm Equipped with anti-splinter device: model JOLLY Free programming on vertical positioning: Adjustment 1 mtr./min. MODIFICATIONS: • This machine will be delivered in a special version, which is suitable for processing workpieces up to 4500 mm in length, 150 mm in height (saw blade / chipper diameter 450 mm.) and automatic turning of the workpiece. • When processing lengths up to 3200 mm, it is possible to process 2 workpieces simultaneously, but for lengths from 3200 to 4500 mm, only 1 workpiece can be processed (automatically). • The machine is equipped with "ROTATEN" for the first and second pin axis. (CNC interpolation of the X and Y axis of the pin table). This is for the production of beveled connections from -60º to +60º • The corner rounding units cannot be used in combination with "Rotates". • Interpolating movement "Rotates" for 2 pin aggregates. - Device for automatic machining of bevel joints with -/+ 60°. - Motor power of both pin units 11 kW (15 HP). - Max. tool diameter for both pin units 370 mm. - Hardware and software adjustments. PROFILE SECTION: Pos. 6 (right) Profile spindle Spindle dimensions: 620 x 50 mm Motor power: 11.5 kW (15 HP) Speed: 6000 rpm. Min./max. tool diameter: 130-250 mm Vertical movement: 575 mm Vertical CNC-controlled axis: 1 m/min Horizontal CNC-controlled axis: 1 m/min Pos. 7 (right) Profile spindle Shaft dimensions: 620 x 50 mm Motor power: 11.5 kW (15 HP) Speed: 6000 rpm Min./max. tool diameter: 130-250 mm Vertical movement: 575 mm Vertical CNC-controlled axis: 1 m/min Horizontal CNC-controlled axis: 1 m/min Pos. 8 (right) Profile spindle Shaft dimensions: 620 x 50 mm Cohxjwfg R To D I D Ajgt Motor power: 11.5 kW (15 HP) Speed: 6000 rpm TOOLING INCLUDED! MORE INFORMATION ON REQUEST!

Condition: excellent (used), Year of construction: 1996, Functionality: fully functional, Weinig Unicontrol 10 Year of manufacture: 1996 Technical condition: Very good Description: The Weinig Unicontrol 10 is a CNC automatic machine designed for planing and profiling wooden elements, particularly used in the production of windows and doors. It combines the functions of four-sided planing and precise profiling. Main features: ✅ Automatic adjustment of spindles and guides using a CNC system ✅ Very high machining precision – ideal for serial production ✅ Fast machine setup thanks to profile setting memory ✅ Robust and durable frame construction ✅ Suitable for working with various types of wood – both soft and hard Cehxewbikbj D I D Asgt Included in the set: Weinig Univar 6, year of manufacture: 1996, in very good condition.

Condition: used, Year of construction: 1998, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 GUBISCH – CENTROMAT CW 2 ----- Manufacturer description: ----- Cohxju Nmx Rj D I D Asgt For window and door production, with 50 mm spindle diameter in longitudinal profiling. With the following processing stations and options: - Slotting machine on one side for straight and angled connections Milling machine for longitudinal profiling - Rebating operation with synchronous milling unit and automatic plunge. Pivoting frame support up to 650 mm - Central control 1.0 cross-cut saw automatically plunges from above ----- Motor power, including motor brake: 3.0 kW Spindle speed: 2,800 rpm. Cutting circle diameter: 350 mm diameter Spindle diameter: 30 mm diameter Clamping flange, 1 driver 6 mm diameter TK 42, 120 mm diameter Pneumatic vertical stroke: 100 mm Pneumatic horizontal stroke: 160 mm against 2 manually adjustable 6-way turret stops Chip extraction hood with extraction nozzle 100 mm diameter 2.0 slot unit ----- Motor power, including motor brake: 9.2 kW Spindle speed: 3,800 rpm Flight circle diameter: 320 mm diameter Spindle diameter: 50 mm diameter Usable spindle length: 320 mm Pneumatic vertical stroke fixed: 2 x 100 mm Suitable for 3 tool sets of 100 mm each Zero height: 10 mm Chip extraction hood with extraction nozzle: 160 mm diameter 3.0 Slotting table ----- Table height above floor 920 mm Feed for 4 speeds freely adjustable: - 1. Milling, slanting window and typing speed can be set in the table (approx. 7 m/min.) - 2. Sawing speed approx. 7 m/min. (can be set on the device) - 3. Transfer speed approx. 10 m/min. (can be set on the device) - 4. Return speed/without processing approx. 25 m/min. (can be set on the device) - Motor power, including motor brake 0.37 kW Workpiece clamping pneumatic Pendulum pressure shoes Workpiece clamping pneumatic 1 clamping cylinder with 2 additional pressure shoes 3.1 Counter wood device Counter wood changer with 2-way automatic change and then with manual. Rotation of 180 degrees, 2 further counters possible, which then also counter in automatic mode 3.2 Length stop ----- - Stop system with 3 scales for - a) outside frame - b) outside sash upright - c) outside sash crosswise Adjustment manually - Length with attachable extension 3000 mm - for sloped windows, pivotable +/- 60 degrees 3.3 Angle transfer - automatic via vertically clocked feed roller in the milling feed 4.0 Milling machine For longitudinal profiling and rebating of windows/doors with the following units: ----- 4.1 First profile milling unit ----- - Counter-rotation - Synchronous rotation with automatic plunge can be used for rebating - Motor power including motor brake: 9.2 kW - Spindle speed: 6000 rpm. - Cutting circle diameter: 240 mm max. - Spindles adjustable for zero diameter 140 mm max. - of tools 112 mm min. - Zero height: 10 mm - Spindle diameter: 50 mm diameter - Spindle usable length: 320 mm - Vertical stroke pneumatically fixed, - suitable for 4 tool sets of 80 mm each, 3 x 80 mm - Horizontal stroke pneumatic: 80 mm - Chip extraction with extraction nozzle diameter 140 mm 4...

Condition: good (used), Code: 0064 Brand: SCM Model: MULTIFLEX - CE Standard Working center for Window Frames (Tenoning / Profiling / Squaring) - CE Standard Technical data: Max working length mm 2800 Min/max workpiece height mm 30/140 Tenoning unit Automatic carriage with rotating anti-splinter device - Telescopic tilting guide for execution of inclined tenons Cohxev Rd Izj D I D Asgt End cutting saw diameter mm 400 - Motor Hp 4 Tenoning spindle max length mm 320 - Motor Hp 10 Spindle diameter mm 50 Max tool diameter mm 350 Exhaust outlet diameter of tenoning unit n° 2 x 120 mm Profiling unit Feed speed mt/min 1,5 - 16 - Motor Hp 1 1° Profiling spindle and time intervention - Length mm 160 Spindle diameter mm 50 Motor Hp 7,5 Max tool diameter mm 220 Exhaust outlet diameter mm 150 2° Profile spindle - Length mm 320 Diameter mm 50 Motor Hp 7,5 Max tool diameter mm 220 Exhaust outlet diameter mm 150 Glaze bead recovery unit Motor Hp 3 - Rev/min 5000 Max tool diameter mm 220 F25 Exhaust outlet diameter mm 50 Electronic programmer for spindle positioning Memory capacity for up to 100 different work programs Compressed air 7 bar Overall dimensions for transport mm 2200 x 3300 x 1950 h Weight kg 2500

Condition: used, Year of construction: 2000, Storage location: Nattheim Cshx D Iovwdmwe D Asgt

Condition: used, Functionality: fully functional, SCM Method in ready-to-use condition. The machine is equipped with Vivaldi tools with frame thicknesses of 80 - 90 mm for wood, wood-aluminum, and heritage windows. Cgjhx D Isv Tmi He D Aot This machine can produce approximately 60 - 80 windows per day.

Condition: excellent (used), Year of construction: 2012, WEINIG UC MATIC window production line consists of: Unirex 3000 U3002 machining center consisting of: Drilling gantry, 3-sided loading For 6-sided, horizontal and vertical drilling and milling of window and door components without longitudinal profiles Univar 15 For longitudinal profiling of individual parts and elements in frame-by-frame or serial production. Cgjhsiffinox D I D Aot Working width 40-140 mm Working height 40-150 mm Minimum workpiece length 220 mm + 2 end profile lengths Maximum workpiece length 4000 mm Unitex 15 For cross-profiling of individual parts. Working width for 90° machining: 40-200 mm Single part working width max. 200 mm Double part working width min. - max. 50 mm - 120 mm Workpiece length for 90° machining: min. 275 mm + 1x final profile length Max. workpiece oversize 150 mm Studio window setup

Year of construction: 1995, Condition: excellent (used), MACHINE CONNECTED, WORKING IN GOOD CONDITION, POSSIBILITY OF TESTING - INCLUDED IN THE TOOL SET The Weinig UC 10 combined mortise, tenon and rebate machine for the flexible production of various windows, elements and doors without changing tools. Frame-by-frame production, serial or one-piece. - Units: 1. Cross cut saw: ø 40 mm, 3 kW 2nd tenoning and slotting spindle: clamping length: 320 mm, ø 50 mm, stroke: 8 x 80 mm, 11 kW 3rd profiling spindle 1: clamping length: 320 mm, ø 50 mm, stroke: 4 x 80 mm, 11 kW 4th profiling unit, horizontal from above, 3 kW, ø 40 mm, clamp length: 40 mm 5th profiling spindle 2: clamping length: 320 mm, ø 50 mm, stroke: 4 x 80 mm, 11 kW 6th profiling unit, vertical right, 3 kW, ø 40 mm, clamp length: 160 mm - Studio window unit - Slat conveyor with conveyor belt for automatic return transport to the operator - NC axis: feed height adjustment - Milling package Cgshxslc N N Uj D I D Aot THE MACHINE HAS 3 SETS OF TOOLS FOR WOODEN WINDOWS - PROFILES 68/78/92

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2781 Weinig Unicontrol 6 Online ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser aiming light for detecting the saw section Length stop CNC controlled ----- > Length 3500 mm > Electronic length stop including positioned cross-cut saw Item 2: Tenon and slot spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle stroke vertical pneumatic: 240 mm for wood thickness 68 - 92 mm > Spindle speed: 3000 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 360 mm > Motor power: 11 kW Item 3: 1. Profiling spindle (same and opposite rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Item 4: 2. Profiling spindle ----- > Position: vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle stroke vertical pneumatic: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 axially clocked feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g. glass-parted rungs) Rung guide consisting of: Rung support bar from above in the area of ??the profile milling unit vertically right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 2 positions > Radial adjustment range 125 mm, 4 positions, manual Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 110 mm, 8 positions using pneumatic turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.8 kW Other features ----- > online-capable > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Rebating device for tear-free rebating > Milling carriage for milling sashes with frame widths of less than 500 mm. Automatic pneumatic clamping. Minimum frame height 450 mm > Double parts package > Return conveyor for 1-man operation: swivel belt > Screen control Cgjhxov E R Ikj D I D Ast > Studio window device > Electronic angle display for studio windows > Industrial PC, with Windows PC control/NEXUS Extraction nozzle diameter: -----...

Condition: ready for operation (used), Year of construction: 1993, SCM Method K electronically controlled window production system The machine will be in use until February 18, 2025 and can be inspected in operation until then Cehxevxvg Ss D I D Aegt Condition Ready for use, always serviced by SCM Technical data see brochure Without milling tool. Available for an additional charge Year of manufacture 1993 Price 4500.-

Condition: used, Angular system Weinig Unicontrol 10 (UC 10) for the production of windows, elements and doors. Frame by frame, in series or individual part production with 2 tapping and slotted spindles incl. Oertli tool set * Aggregates: 1. Crosscut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tapping and slotting spindle, NC axis, ø 50 mm, 15 kW, Clamping length: 640 mm (8 x 80) mm 3. Second tapping and slotting spindle, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Profiling unit, horizontal from above, 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Profiling unit, vertical right, 3 kW 9. Profiling unit, vertical right from above, 3 kW 10. Profile milling unit, horizontal from below, NC axis 3 kW * Double part package * Milling package with milling carriage * Automatic turning system * PC control NEXUS * CNC controlled length stop * Studio window facility * Aggregate for edge rounding from below with a crosscut saw * Rung support bar * Incl. suction pipe system * Incl. tool set Oertli * Further technical data and tool drawings on request. Cgohjv Ag Tdjx D I D Aot

Condition: excellent (used), Year of construction: 2006, Fully working UniControl 12 year 2006 Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Total el power 114 kw 400 V AC Cgehx Djmgc I No I D Ajt Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

Year of construction: 2005, Condition: excellent (used), I sell the window angular centre Colombo Angelo Figli AM33/AF. Year 2005. Tenoning side saw blade + 620mm spindle fully servomotorical. Profiling side 3 spindles + glass-strip cut aggregate fully servomotorical. Moulding heads VYDONA WOOD EU78-92. Wood-Alu 92, all programmed in the machine and included / possible to count out when you dont buy them. Cshx D Ish Txkqj D Ajgt Total power 50KW Total weight 6000kg. Compact dimension, suitable also for small workshops. Available immediately on stock. Very good condition. Complete set with tools / possible to count out when you dont buy them. Please contact me for more photos and information.

Condition: used, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm control Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage ..... Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) ..... crosscut saw ..... > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate ..... > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment path mechanically coupled with crosscut saw. > Radial adjustment pneumatically controlled on/off electronic length stop ..... > Length 4500 mm 1. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered 2. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW Cohx Devu Hdyo I D Aegt > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered Transfer tape ..... Included for transferring the parts to longitudinal machining Separation of double parts before the start of longitudinal processing. 1. Profiling spindle (synchronous and counter-rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool fli...

Condition: used, Combined tenon, slot and rebate angle machine Weinig UC 10, for the flexible production of various windows, elements and doors without changing tools. Frame-wise, serially or individual parts production, including tool set Oertli Wood/Alu IV 77 & 67 and Wood IV 77 & 67. · Aggregates: 1. Cross-cut saw: NC controlled, ø 40 mm, 3 kW 2. Tap and slot spindle: clamping length: 640 mm, ø 50 mm, stroke: 8 x 80 mm, 11 kW 3. Profiling spindle 1: clamping length: 320 mm, ø 50 mm, stroke: 4 x 80 mm, 11 kW 4. Profile milling unit, horizontal from above, 3 kW, ø 40 mm, clamping length: 40 mm 5. Profiling spindle 2: clamping length: 320 mm, ø 50 mm, stroke: 4 x 80 mm, 11 kW 6. Profile milling unit, vertical right, 3 kW, ø 40 mm, clamping length: 160 mm 7. Profile milling unit, horizontal from below, 3 kW, ø 40 mm, clamping length: 125 mm · Studio window setup · CNC controlled length stop · Slat conveyor including conveyor belt for automatic return transport to the operator · NC-axis: feed height adjustment · Milling package · Incl. tool set Oertli Wood/Alu IV 77 & 67 as well as Wood IV 77 & 67. Cgjhjvmqtcjx D I D Ast

Condition: used, Tenoning spindle , 0 Number of milling agregates , St. Spindle diameter , mm Listing of wooden windows and joinery Machines still in use can be viewed! Only complete sale possible, price on request! ----- Cohx D Iewg Htdj D Aogt Maschinenauflistung: Pos.1: Altendorf F45 sliding table saw, year 1989 Item 2: Torwegge multirip saw, built 1960 Item 3: Bütfering wide belt sander, year 1983 Item 4: Löwer 400 wide belt sander, year 1994 Item 5: SCM T 150 Class, year 1993 Item 6: Small circular saw, year 1970 Item 7: Wigo milling machine Item 8: Centauro band saw, year 1988 Item 9: Concord surface planer, year 1978 Item 10: Martin thickness planer, year 1978 Item 11: Hess frame press, year 1988 Item 12: Scheer automatic dowelling machine, year 1988 Pos.13: Okoma UF3 rebating machine, year 1980 Pos.14: Okoma UF1S automatic angle press, year 1987 Pos.15: Schneider slot and tenon cutter, year 1989 Item 16: Weinig Profimat 22 N planing machine, year 1988 Item 17: Stromab Z-saw, year 1991 Item 18: Bürkle press, year 1960 Item 19: Putsch Meniconi, year 2003 Item 20: Linde HD20 stacker, built in 2010 Item 21: Löwer belt sander, year 2000 Item 22: Stehle window tools IV 68 complete, year 1987 only wood,for Okoma window centre and outside profiler Adiitonal IV 78 tools only dowel connection for Solo machines Item 24: Tieger track + rakes, year 1988 Item 25: WMO pumps, year 1988 Item 26: Glazing bead saw, year 1988 Item 27: Löwer moulding sanding machine, year 2000 ----- All prices quoted are net plus VAT. More pictures in the attached PDF! (technical data according to manufacturer - without guarantee!)

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ----- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Cshx Dsvu Hfqs I D Ajgt Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Other features ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: slat conveyor > screen control > inclined window device > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: Note on used tools: We currently have used Gold...

Condition: used, Tenoning spindle 1 St Number of milling agregates 3 St. Spindle diameter 50 mm Gubisch type EST-H 2000/2 ----- !Machine still in use and can be viewed! Including Aigner tools built 2010: IV68/78/88 wood-wood-aluminum Eurofold + 4mm rebate clearance Manufacturer description: ----- one-sided angle combination for window and door production consisting of tenoning and slotting machine, angle transfer and milling machine Crosscut saw: ----- P = 3 kW U = 3000-1 Saw diameter: 400 mm Flange diameter: 80 mm Adjustment: horizontal: man. adjustable, readable from mechanical digital display Adjustment range: 0-120 mm Length stop LAS ----- Adjustment: manual Length: extended to 3.2 m Slotting unit (cross machining) ----- P = 9.2 kW U = max. 4500 depends on your tools and is adjusted accordingly Clamping height: 300 mm Useful height: 300 mm Shaft diameter: 50 mm Largest tool diameter: 400 mm max., 240 mm min. Adjustment: vertical Adjustment range: vertical 210 mm under table Number of tools: 3 tool sets of 100 mm each provided by customer 0-height 10 mm Shortest workpiece: 320 mm + tenon Narrowest workpiece: 48 mm Widest workpiece: 170 mm 1. Profile spindle ----- Position of the spindle: vertical right Function: profile production and automatic synchronous immersion P = 9.2 kW U = 6000 rpm Clamping height: 100 mm Useful height: 100 mm Diameter: 50 mm Flight circle diameter: 100 - 240 mm Adjustment range: horizontal 70 mm, tool 0-height 10 mm Number of tools: 1 a 100 mm clamping length max. 2. Profile spindle ----- Position of the spindle: vertical right Function: profile production P = 9.2 kW U = 6000 rpm Clamping height: 300 mm Useful height: 300 mm Diameter: 50 mm Flight circle diameter: 100 - 240 mm Adjustment range: horizontal 70 mm, vertical 100 mm for tool 0-height 10 mm Number of tools: 3 at 100 mm clamping length max. 3. Profile spindle ----- Position of spindle: vertical right Function: profile production P = 9.2 kW U = 6000 rpm Clamping height: 300 mm Useful height: 300 mm Diameter: 50 mm Cutting circle diameter: 100 - 240 mm Adjustment range: horizontal 70 mm, vertical 100 mm for tool 0-height 10 mm Number of tools: 3 at 100 mm clamping length max. 4. Profile spindle (glass bead saw unit) ----- Position of spindle: horizontal top, right P = 3.0 kW U = 3000 rpm Cutting circle diameter: 250 mm Clamping flange mount: 60 mm diameter Hydraulic adjustment: automatic up/down, forward/backward for 1 Basic height and 1 basic depth Other technical details ----- Clamping table slot unit ----- Cgjhx Dsv Dmqrj I D Aet On ball guide bushing and roller guides Manual swivel range: 60 degrees in both directions Speeds: 0 - 28 m/min. continuously adjustable 4 speed ranges fast feed in front of slot unit slow feed in cutting area adjustable fast feed for transfer fast return Counter wood: counter wood changes automatically with spindle stroke Transfer type in profile area: occurs automatically Operating mode: individual part production, frame by frame Production and series production possible Longitudinal profiling -----...

Condition: used, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Cehxovu Hghj D I D Asgt # 2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment path pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser aiming light for detecting the saw section Item 2: Rounding unit horizontal below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9,000 rpm > Max. tool flight circle: 130 mm > Axial adjustment path mechanically coupled with Crosscut saw > Adjustment path radial pneumatically controlled on/off Length stop NC controlled ----- > Length 3500 mm > Electronic length stop Item 3: Tenon and slot spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Item 4: 1. Profiling spindle (same and opposite rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Item 5: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatic opposite the spindle controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??the synchronous spindle), Rung support bar from above in the area of ??the profile milling unit vertically on the right and profiling spindle. Pos. 6: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment range 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-way turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Item 8: Profile milling unit/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > Axial adjustment range 100 mm, 8 positions > Radial adjustment range 1...

Condition: used, Tenoning spindle 1 Stk. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2756 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please inquire about any additional accessories included) Pos. 1: Crosscut saw ----- > Number of tools: 1 piece. > Spindle speed: 3,000 - 6,000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Adjustment path radially pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser directional light to detect the saw section Pos. 2: Rounding unit horizontally at the bottom ----- > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm > Adjustment path axially mechanically coupled to crosscut saw > Adjustment path radially pneumatically controlled on/off Length stop CNC controlled ----- > Length 3500 mm > electronic length stop Pos. 3: Tap and slot spindle ----- > Number of tools: variable, infinitely variable, NC-controlled > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, infinitely variable, NC controlled > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Pos. 4: 1. Profiling spindle (synchronous and counter-rotation) ----- > Position: vertical right > Number of tools: 1 piece. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW Pos. 5: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable, NC-controlled > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, infinitely variable, NC controlled > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatically controlled opposite the spindle, 2 positions Rung guide consisting of: Guide ruler in the stop (area of synchronous spindle), Rung support bar from above in the area of the profile milling unit vertically on the right and profiling spindle. Pos. 6: Profile milling unit horizontally at the top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.8 kW > Speed 9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment path 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fittings spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment path 110 mm, 8-fold turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm Cgshsvpr Rhox D I D Ast > Motor power: 3.8 kW Other features ----- > online capable > Electric feed height adjustment i...

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 used Weinig Unicontrol 6 window system ----- Manufacturer's description: Cgshx D Iswabhve D Ajt For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transverse machining) controlled via selector switch on the control panel. Technical Specifications ----- Crosscut Saw ----- Number of Tools: 1 Spindle Speed: 2,800 rpm Spindle Diameter: 40 mm Max. Tool Diameter: 350 mm Motor: 3 kW Mortise and Slot Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 3,500 rpm Spindle Diameter: 50 mm Tool Clamping Length: 320 mm Max. Tool Diameter: 320 mm Motor: 11 kW Profile Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 6,000 rpm Spindle Diameter: 50 mm Tool clamping length 320 mm Max. tool diameter 232 mm Motor 11 kW Special equipment: Synchronous spindle ----- Pneumatically timed forward/backward for tear-free rerouting of window sashes, frames, and doors. Spindle diameter 50 mm, 4 kW Tool clamping length 120 mm, zero tool diameter 112-140 mm Max. tool diameter 232 mm, spindle speed 6000 rpm Motor boost for synchronous spindle from 4 kW to 7.5 kW Screen control for 99 window types. One type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame-by-frame, series, rerouting. Data entry via keyboard with integrated operator guidance and error diagnostics. 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm, with 10 x 4 mm key Clamping length: 13 mm Clamping length: 40 mm Axial stroke, 2 positions Radial stroke, 2 positions Max. tool diameter: 130 mm Grooving spindle motor boost from 2.2 to 3 kW 1 Fitting milling unit, right: ----- For milling fitting grooves in the circumferential milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the control panel. Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting radius: min. 140 mm, max. 180 mm Home position below table level: 10 mm Special design of the fittings milling machine: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial cycle, 2 positions Motor booster for the hinge milling spindle from 2.2 to 3 kW Hinge milling spindle for 230 mm tool diameters in and above the table Electric height adjustment of the feed with selector switch on the co...