Used Zero Point for sale (8,264)

Condition: used, feed pressure / bar liter capacity / l Air consumption / m³/h For sale is a powerful ALUP Solo 18 screw compressor with 18.5 kW motor power, ideal for industrial use. The compressor is offered including a high-quality DRYPOINT RA refrigeration dryer from Kaeser - for reliable and efficient compressed air drying without moisture problems. The ALUP Solo 18 is a compact, oil-injected screw compressor, which is suitable for medium to large operations. It is characterised by its energy efficiency, low noise levels and high reliability Technical specifications Motor power: 18.5 kW Max. Operating pressure: 13 bar Delivery rate: up to 200 m³/h Low-noise and energy-efficient Including DRYPOINT RA refrigerant dryer for dry, clean compressed air Including compressed air tank for pressure stabilisation and condensate management Perfectly suited for demanding industrial applications Technical data taken from publicly available sources Ndsdpfxewz Ry Do Aansf

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 34,797 h, machine/vehicle number: 2011-0250, pipe diameter (max.): 600 mm, pipe length (max.): 1,500 mm, bending angle (max.): 180 °, bending radius (max.): 200 mm, wall thickness: 3 mm, The machine was originally built in 1996. Originally overhauled by the manufacturer in 2011 for approximately €250,000: electrical and mechanical components completely renewed. TECHNICAL DETAILS Pipe diameter: 16 - 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 - 200 mm Pipe length: 1,500 mm Bending angle: max. 180° + springback Pipe length: 400 - 1,500 mm Pipe outer diameter: 28 mm - 60 mm Material parameters Tensile strength of stainless steel: max. 750 N/mm² Tensile strength of mild steel: max. 450 N/mm² Performance limit (steel): Ø 60 x 3 mm Performance limit (stainless steel): Ø 57 x 2 mm Travel movements Bending direction: left Bending speed (forward travel): max. 22.0 rpm (infinitely adjustable) Bending speed (reverse travel): constant 22.0 1/min Twisting angle: max. 360° Twisting speed: 50 rpm Height adjustment for multiple radii: lowest tube center 55 mm Height travel: suitable for 3-groove bending tools MACHINE DETAILS Stop time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control panel (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic filling volume: 340 l Control system Bending levels: up to 6 (CNC-programmable) Positioning device: NTB version Control unit: Schwarze-Robitec operating and control panel EQUIPMENT - Automatic cold pipe bending machine - Pipe positioning device - Gripper - Schwarze-Robitec pipe magazine - Hydraulic operation for bending table, tool clamping, slide rail, mandrel retraction, reinforced slide rail feed and retraction - Various bending tools for Ø 60 mm pipe - Various auxiliary tools - Cooling unit for control cabinet - Foot control (2-way) - Schwarze-Robitec control panel Ndedpfx Aswlpt Deanjf - Cooling unit for control cabinet Rittal type SK 3361100 Note: Due to a lack of operating knowledge, the machine could only be tested in setup mode. No errors are known.

Condition: used, Year of construction: 1986, tube diameter 4-20 mm wall strength 2 mm bending radius min. 10 mm bending radius max. 75 mm bending speed 35 mm/min pull up length of tube 2000 mm Nodpfewbi Hcex Aanjdf total power requirement 7,5 kW weight of the machine ca. 1,1 t dimensions ca. 3100x1000x1400 mm

Condition: used, Year of construction: 2003, functionality: unexamined, machine/vehicle number: 2205, grinding wheel diameter: 350 mm, grinding wheel width: 5 mm, mount diameter: 75 mm, Power Supply: 400 V / 50 Hz Power Rating: 70 kVA Fusing: 3 x 125 A Conductor Cross-Section: 5 x 25 mm² Cu Workpiece Diameter: ⌀ 5 – ⌀ 50 mm Workpiece Length: 50 – 300 mm Manual loading and unloading External fully automatic loading device Workpiece headstock fixed on grinding table Workpiece Spindle Unit: Dimensions: ⌀ 135 x 400 mm Lubrication: Permanent grease lubrication Bearing Seal: With air purge Drive: With HF motor Special Mount: Junker standard flange ⌀ 75 mm Max. Speed: 6000 rpm Tailstock: Longitudinal Adjustment: Manual Nodpfowfg Rgex Aanjdf Rotating Center: Junker standard flange ⌀ 48 mm (⌀ 75 mm) Grinding Table: Feed: Z-axis Grinding Spindle Headstock: Infeed: X-axis Horizontal Swivel: B-axis HF Grinding Spindle Units I, II, III: Dimensions: ⌀ 165 x 350 mm Flange: ⌀ 190 mm Standard Flange: ⌀ 127 mm Lubrication: Permanent grease lubrication Bearing Seal: With air purge Drive: 8 kW Balancing: Electronic Max. Speed: 8800 rpm Grinding Wheels I, II, III: Type: Borazon (CBN), ceramic bond Diameter: ⌀ 350 mm Bore: ⌀ 127 mm Coating Width: Max. 5 mm (standard) Peripheral Speed: Max. 140 m/s

Condition: good (used), Year of construction: 2015, Energy Saving Refrigerant Dryer Ndjdpfx Aog A Hcxjanjf Build in 2015 Pressure 14 bar

Condition: used, functionality: unexamined, Ferwood Code: RU0008928 - Manufacturer Code: 631417200 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Ndodpfx Aajv Hpyhsnjf

Condition: used, year of last overhaul: 2017, Machine type: Tube pointing hammer machine (cold pointing) Tooling: 4 hammer jaws, hydraulically or pneumatically driven, acting simultaneously on the tube end. Ndjdpfxsxydwqe Aanef Application: Preparation of steel, stainless steel, or non-ferrous tubes for cold drawing. Scope of delivery: AVS 63 pointing machine Pipe separation All available documentation

Condition: used, Year of construction: 1990, Folding tap pointer . tube diameter 5 - 20 mm Ndjdpfxoit Ewfe Aansf tag length 50 - 100 mm total wight 1,4 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1992, functionality: fully functional, BOBST Domino 72 Folder Gluer for sale! Year 1992 Cold glue system ERO with 2 glue guns Max width 720mm Min width 126mm Max speed 400m/min Compact cardboard up to 600g/m². Automatic bottom system Ndedpfx Ajxlki Rsanef Counter ejector

Year of construction: 1986, condition: like new (used), More information on request Nodpfjhmfnhex Aanodf

Year of construction: 2025, condition: new, This 4-side -pointer was designed mainly for small and medium quantities with manual feeding. The machine has the following performance. As a drive type for the hydraulic pump, the machine is optionally supplied with a 7.5 kW electric motor or with connection for a cardan shaft. Sometimes it can be very simple: the mechanical sharpening machine has been specially designed for fast and practical feeding under manual feeding. It is therefore perfect for producing small and medium quantities of fence elements, wooden posts and palisades. Ideal for flexible landscaping or hastily planned timber construction. It can process any type of milled and peeled wood. Even curved weak wood, or logs with bark are no problem for the sharp knives. Maximum log diameter 270 mm Shortest lenght of log 1,15 m 5 pointing angles adjustable For rounded, peeled and unmachined logs Nedpfx Asfw A D Nsanedf Capacity 150 to 250 poles/houre Cylinder force 2 x 10 to Oilpressure 200 bar Power unit Electro motor 7,5 kW PTO drive Tractor pump

Condition: used, functionality: unexamined, Ferwood Code: RU0008927 - Manufacturer Code: 631417600 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Ndedsv Hpx Dopfx Aanjf

Condition: new, Technical specifications Two-phase mains voltage : 400 V. Mains frequency : 50/60 Hz. Njdohzg Ihopfx Aansdf Max. puncture current : 9700 A. No-load voltage MAX : 2,6 V. Thickness MAX tacking 2 sides : 3+3 mm. Max electrode force : 190 daN. Arms projection : 330 mm. Nominal power X=50% : 22 kw. Nominal power X=50% : 15 kw. Power factor : 0.7 (cosphi). Intermittence ratio : 15%. Dimensions : 79 - 32 - 128 cm. Weight : 118 kg. Resistance welder (tacking machine) with column, swinging arm, with digital microprocessor control. The multifunction LCD digital panel allows to operate: in EASY mode (setting of current and tacking time); in EXPERT mode (setting of different tacking parameters) with the possibility to save up to 20 customized programs. Continuous and pulsed operation guarantees excellent welds on various types of steels. Features: adjustment of the welding current (%), welding time (cycles), pressure and speed of electrode closing choice of various welding cycle parameters (approach time, ramp time, welding time, pause time and number of pulses) easy-to-read LCD display pneumatic drive thermal protection with signaling air flow regulation for the slowing down of the arms closure Model requires cooling

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: M04I/9012, Offer Number: M04I/9012 Machinetype: pointing machine Info: vibratory feeder Make: HILGELAND Type: SKM 08 Ndedpjwzkn Iefx Aanof Constr. year: 2011 diameter range: 2-8 mm shaft length under head: 150 mm output pieces/min: 70-300 Location: Germany

Condition: excellent (used), Year of construction: 1973, functionality: fully functional, Pointing range: 7,0 - 1,5 mm Number of kalibers: 16 Ndodpfx Ash U A Sfoansf

Year of construction: 2004, condition: excellent (used), Type: HRA4/80-4 Nodpfxjhmfh Ho Aanodf Pipes: Ø 6 ÷ 24 mm, wall thickness = 1 ÷ 2,5 mm • Point: Ø3 ÷ 12 mm

Condition: new, Year of construction: 2025, Simply top - and practically as if by itself The automatic pointing machine from VKM The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Behind this is a sophisticated system that allows all production steps to be carried out with maximum precision at maximum speed. Perfect for all logs that are already milled and/or peeled and waiting for their final shape as posts, poles or palisades. Simply point - and practically by itself The automatic pointing machine from VKM The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Nodjhm S Ruopfx Aanjdf Both models allow three process steps - coping, pointing and chamfering - to be carried out fully automatically at the same time. Without slowing down the production flow: For example, the single-length machine can handle up to 4,000 wood piles and more in single-shift operation. The powerful geared motors run up to top performance via frequency converters - for maximum speed in cutting and cycle time optimization. This has a particularly positive effect when handling different diameters: the processing speed can be easily adapted to the logs.

Condition: used, functionality: unexamined, Ferwood Code: RU0008930 - Manufacturer Code: 6714A1830 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Ndjdpfxev Hpzfo Aansf

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone Ndjdewa Ix Ijpfx Aanof -Manufacturer: Röhm / unknown, revolving center points 5 pieces -Type: Röhm 108H MK4 / 108HVL MK4 / 3x without type designation -Recording: MK4 -Price/Delivery: complete -Transport dimensions: 290/230/H80 mm -Weight: 9.6 kg

Condition: used, Bar pointing/chamfering machine PAREX Nsdpfexdnwpsx Aanjdf

Condition: used, functionality: unexamined, Ferwood Code: RU0008934 - Manufacturer Code: 631417100 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Ndjdpfx Aov Hp Daeanef

Condition: used, live center, live center, live morse taper, live center, live lathe center, live center -Manufacturer: WMW, live center 2 pieces -Type: ZN 205 -Intake: MK5 -Price/delivery: complete -Total dimensions: 270/190/100 mm Ndjdpfx Aaog Ualaonof -Weight: 10kg

Condition: used, functionality: unexamined, Ferwood Code: RU0008929 - Manufacturer Code: 631417500 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Nsdjv Hpyzspfx Aanedf

Condition: used, live center, live center, live morse taper, live center, live lathe center, live center -Manufacturer: Röhm / unknown, revolving center points 2 pieces -Type: Röhm 102N MK2 / without type designation -Intake: MK2 Nodpfxsm U A E Us Aanedf -Price/delivery: complete -Transport dimension: 160/100/H50 mm -Weight total: 2 kg

Condition: used, functionality: unexamined, Ferwood Code: RU0008931 - Manufacturer Code: 6714A1831 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Ndodpfx Aajv Hpz Sonsf