Used Zero Point for sale (5,407)

Condition: new, Year of construction: 2023, machine/vehicle number: PRJ065958, ALZMETALL bench drill press, drilling capacity in steel: 16 mm Short spindle MK2, spindle stroke: 80 mm, overhang: 190 mm, column diameter: 65 mm, usable support area of machine table: 300 x 240 mm, with T-slots 2 x 12 mm x 80 mm, distance spindle-table min./max.: 75/357 mm, height adjustment of machine table via hand crank, machine table base plate, usable support area: 300 x 240 mm, with T-slots 2 x 12 mm x 80 mm, distance spindle-base plate min./max.: 437/437 mm, manual feed, machine height without options: 825 mm, net weight: 83 kg. - Speed infinitely adjustable 100-2000 rpm Standard equipment: 5" TFT-LCD display with touch function: manual input of target spindle speed, display of actual speed, integrated depth gauge with touch-sensitive zero point setting, virtual depth scale in the display, machine status indicators and warning messages in the display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU AC motor 230 volts, 50 Hz, connection plug pre-assembled, cable length 2 m, three separate buttons for right-hand rotation - left-hand rotation - stop, spindle stop via braking function, spindle guard with electrical protection, main switch lockable, mushroom push button (self-locking) for EMERGENCY STOP, speed adjustment infinitely adjustable by means of a potentiometer, protection class IP54, spindle guard with electrical protection, paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black including the following options: Dwjdpfx Apelubw Ijteb LED machine light, item no. 12. Delivery time: ex stock Waiblingen Beinstein.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,848 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis EMCO MC 75-50 was manufactured in 2008. It features an X-axis travel of 750 mm and Y-axis travel of 500 mm, providing versatile machining capabilities. The machine is equipped with a Heidenhain iTNC 530 control and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the EMCO MC 75-50 vertical machining centre we have for sale. Contact us for further details. • Axes: 4 (standard) + optional 5th axis • Spindle: Kessler • Operating hours: Control ON 36,839 h; Machine ON 21,370 h; Program run 11,122 h; Spindle ON 9,848 h • Electrical: 400 V, 3 phases, 50 Hz, nominal current 50 A, largest load current 30 A, breaking capacity 16 kA • Protection grade: IP54 • Electrical cabinet weight: 220 kg • Cooling: Coolant system with belt filter (MicroMag filtration unit visible) Additional equipment Dedpfx Asywyq Deptswb • Chip conveyor • Wired electronic handwheel • Lehmann rotary axis with rocker and counter bearing • Zeroclamp zero-point clamping system • Retrofitted electrical cabinet cooling unit (Rittal) • Nikken rotary table Technical Specification Taper Size SK 40

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 2625.31 € 10 mm B 16 220 mm 60 - 6000 U/min 0,54 kW 350 mm 520 mm 820 mm 44 kg 60 mm 140 - 315 mm 300 x 250 mm 70 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 10/12 (in E335/ST60) Thread cutting device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Dodpfx Aey Hf Rnjptjwb Quickly adjustable and ergonomic Drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift Operation OPTIONS (PRICES ON REQUEST): Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Dedpfsxw N Sbox Aptswb Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you: Technical data: Control system: Heidenhain iTNC 530 HSCI Dwsdpfx Apoxgnz Tjtjb Travel ranges: - x-axis: 600 mm - y-axis: 500 mm - z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC rotary table: - Table clamping surface: 600 x 500 mm - Load capacity: 400 kg - b-axis: -5° to +110° - c-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool positions: 210 Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct path measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC swivel rotary table incl. table cooling - Laser tool measurement BLUM NT - Calibration mandrel with tool holder - Measuring probe infrared, manufacturer Heidenhain TS 649 - Preparation for 3D quickSET - Chip conveyor - MQL, 40 bar, tank 600 l, incl. rotating viewing window, compressed air, linear measuring systems, bed flushing - Flushing gun - Mechanical oil and emulsion mist separator - Compressed air through the spindle center - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic, side loading door - Electrical interface for articulated-arm robots - Pneumatic control and monitoring of the zero-point clamping system - Selection and de-selection of the handling system via a switch on the machine control panel - incl. additional flushing in the work area - incl. machine preparation for job management - incl. control panel arrangement on the left - Power supply to the machine table incl. 2-channel rotary feedthrough - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 clamping circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - incl. extension of the rotary feedthrough to 4 channels Operating hours: approx. 66,600 h Spindle hours: approx. 44,800 h The ball screw drives and linear guides in the x and z axes have been renewed. Accessories, tools and clamping devices shown in the pictures are only included in the scope of supply if this is noted in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: used, Year of construction: 2021, Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Technical data - Manufacturer: Robopac - Model: Helix 4 EVO - Year of manufacture: 2021 - Machine type: automatic rotating-arm stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) - Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) - Pallet sizes: 800 x 1,200 mm and 800 x 600 mm, centred on the conveyor - Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor - Load weight: 100 - 1,200 kg - Conveyor speed: 15 m/min - Machine height: 4,721 mm; hall height from 7,000 mm - Pre-stretch: PGSA carriage, electronically adjustable 100 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. dia. 250 mm, core 76 mm, max. weight 16 kg - Control: Siemens SIMATIC S7-1500 PLC, TP700 7" colour touch panel - Wrapping programs: 15, expandable to 64, 12 control steps per recipe, 4 password-protected access levels Dwodpfxezzz Rdj Aptob - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry and oil-free - Documentation and HMI languages: German / English / Italian Equipment - Rotating arm on a four-column steel structure, geared slewing ring with central lubrication - Patented PGSA pre-stretch carriage with load cell, film tension corrected at the corners, set from the display - Automatic film clamping, cutting and impulse-sealing unit, spring gripper with 300 mm horizontal stroke - Easy Lock tilting roller and roping device for narrowing the film web from below - Pantograph top press unit for load stabilisation during wrapping - Photocell for automatic pallet-height reading - Integrated roller conveyor, pallets loaded and unloaded by forklift - SEW IP55 geared motors for arm rotation and carriage lift, FESTO pneumatic components - Glazed enclosure with Sick M4000 light curtains, 30 mm resolution, 1,800 mm field height - Enlarged illuminated switch cabinet and a separate, independent operator panel - TPM package: centralised lubrication points, gauges with red/green rings, maintenance intervals on the display - Troubleshooting in the HMI with fault location and remedy - R-Connect remote connectivity with cloud portal for production data and teleservice - Documentation printed and on USB: manual, CE declaration, diagrams, spare parts catalogue, layout Condition Used - virtually new, dismantled and professionally packed for transport; photographs show it assembled before dismantling. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: used, Year of construction: 2023, Overview This Robopac Genesis Futura HS pallet winder was built in 2023. It has under 500 operating hours - technically close to new. The rotating ring carries the pre-stretch carriage around the stationary pallet for high throughput without moving the load (see Capacity below). Delivered as a stand-alone unit with integrated roller conveyor, prepared for line integration over Ethernet TCP/IP. Technical data - Manufacturer: Robopac - Model: Genesis Futura HS - Year of manufacture: 2023 - Machine type: automatic rotating-ring stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: up to 92 pallets/h (13 wraps, H 1,000 mm), 77 pallets/h (17 wraps, H 1,600 mm), 70 pallets/h (19 wraps, H 2,000 mm) - Pallet size: 800 x 1,200 mm - Load height: 1,000 - 2,000 mm (incl. pallet) - Load weight: 100 - 1,200 kg - Conveyor height: approx. 550 mm; speed 15 m/min - Machine height: approx. 4,862 mm; hall height from 7,000 mm - Pre-stretch: SCV-B carriage, electronically adjustable 150 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. diameter 250 mm, core 76 mm, max. weight 20 kg - Control: Siemens SIMATIC S7-1200 PLC, Siemens TP700 7" colour touch panel - Wrapping programs: 15 (expandable to 64), 12 steps/recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry, oil-free - Documentation and HMI languages: German / English Dodpfezzz R Dox Aptowb Equipment - High-speed rotating ring: power transfer to the pre-stretch carriage via sliding contacts, Wi-Fi commands - Integrated roller conveyor with pneumatic pallet lifting station (SMC PL-D) - Automatic film clamping, cutting and wide-band sealing unit - Fixed vertical hold-down (top press unit) stabilises the load during wrapping - Roping device gathers the film web from below - Photocell for automatic pallet-height reading, plus a pre-scan photocell with 3,800 mm reflector mast - Inverter-controlled IE3 motors, SEW geared, IP55, FESTO pneumatic components, SICK photocells - Siemens Scalance S615 VPN / firewall router and Scalance XB005 Ethernet switch, TCP/IP link to up-/downstream machines - Safety: Reer Safegate SMPO 1803 light curtain, fenced enclosure, dynamic fall protection on the ring - Operator panel separate from the main switch cabinet, plus remote control unit with emergency stop - R-Connect remote monitoring hardware: cloud portal for production data and teleservice - TPM package (centralised lubrication points, maintenance intervals on display), integrated HMI troubleshooting - Complete documentation on USB stick and in print: operating / maintenance manual, wiring / pneumatic diagrams, spare parts catalogue, layout Condition Used - almost as new, no visible production wear. Still installed and under power; inspection in operation on request. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Year of construction: 2008, condition: ready for operation (used), overall weight: 3,800 kg, spindle speed (max.): 600 rpm, number of axes: 5, This 5s SAACKE UWIF cylindrical grinding machine was manufactured in 2008. It features a maximum spindle speed of 600 rpm and a powerful grinding spindle peak power of 16 kW. The machine supports a variety of workpiece sizes, with a maximum diameter of Ø 20 mm and a weight capacity of 1 kg. If you are looking to get high-quality grinding capabilities, consider the SAACKE UWIF cylindrical grinding machine we have for sale. Contact us for further details. • Workpiece carrier A-axis: Direct drive/hollow shaft motor; indexing accuracy ±15"; indexing possibilities 1–999; cumulative pitch error at 100 mm: 8 µm; speed max. 600 rpm • Tool holder: ISO 50 • Spindle clearance holding sleeve: max. 28 mm (with automatic clamping: Ø20 mm) • Nominal drive power: • Grinding spindle S1-100%: 7.5 kW; peak: 16 kW • X-axis longitudinal travel: 2 kW • A-axis workpiece carrier: 2 kW • Z-axis cross slide: 2 kW • Y-axis grinding head slide height: 2 kW • B-axis grinding head rotation (rotary table): 2 kW • Position measuring systems: • A-axis: Direct measuring system • B-, X-, Y-, Z-axis: Indirect measuring system • Resolution X/Y/Z: 0.0001 mm (0.1 µm) • Resolution A/B: 0.0001° • Electrical connection: 20 kW / 50 A; operating voltage 400 V, 50 Hz; control voltage 24 V; lighting voltage 230 V; backup fuse: separate supply from mains • Compressed air: 15–17 Nm³/h; pressure min/max 6/8 bar (600/800 kPa); quality ≥ Class 4 (ISO 8573-1) • Control & software: CNC NUM Axium Power 1050 with PC, program memory 512 k; NUMROTOplus software (dongle/hardlock required); zero points calibrated using enclosed measuring instructions (no marked reference points) Additional equipment • Workpiece changer options (automation): • Option 1: Pick-up design • Max. workpiece: Ø20 mm × 120 mm; 1 kg • Capacity per pallet: • Ø3.0–5.0 mm shank: 40 pcs • Ø5.1–8.0 mm: 32 pcs • Ø8.1–11.0 mm: 28 pcs • Ø11.1–14.0 mm: 24 pcs • Ø14.1–20.0 mm: 20 pcs • Option 2: Chain loader magazine (with gripper unit) • Capacity: 64 workpieces • Max. workpiece: Ø32 mm × 200 mm; 2.5 kg • Features: Chaotic loading of different workpieces; automatic changing of collets possible • Holding sleeves: Ø6, 8, 10, 12, 14, 16, 20 • External chain loader option: increases machine weight to approx. 3,800 kg and space to 3,000 mm × 1,875 mm • Coolant filter system (TRANSOR): To be provided by customer; air for backwashing approx. 700 Nl/min for 5 min every 6–9 hours Dwodpfoyiz R Usx Aptsb

Condition: new, Year of construction: 2025, neu 2025 030161 prompt, Zwischenverkauf v Deutschland 7350.17 € 141.86 € 1 23 mm MK 2 260 mm 20 - 2000 U/min 1.5 kW M16x1 430 mm 715 mm 1800 mm 290 kg manuell mm/U 110 mm 230 - 850 mm 420 x 340 mm 100 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling capacity 23/25 (in E335/ST60) Manual feed Main switch Tapping attachement Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Djdjxcg Ecspfx Aptswb Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug OPTIONS: Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: excellent (used), Year of construction: 2007, overall weight: 3,800 kg, total length: 900 mm, total width: 900 mm, total height: 1,400 mm, construction height: 1,400 mm, 1 used clamping tower Manufacturer: Schunk Type: Unilock 2x8 NSE 138T Year of construction: 2007 Dwjdpfouykhkex Aptsb Technical Data: Hybrid tensioning tower with T-slots Screw-in system Zero point clamping system LxWxH= 900x900x1400 Weight: 3800 kg Spring-loaded system - Pneumatic opening Turbo function Technical data: Dimensions: Ø138 x Ø110 x 59 mm Pull-in force: 7 kN Pull-in force with turbo: 24 kN Actuating pressure: 6 bar Repeat accuracy: < 0.005 mm Weight: 3.5 kg

Condition: reconditioned (used), functionality: fully functional, Sandt 530 CE Bridge Cutting Machine Hydraulic press with a traveling beam (front/rear movement) designed for cutting various materials using a die (leather, foam, cork, etc.). Very fast and powerful – during operation, the machine is fully automatic and does not require supervision (only the tool and the material being cut are of concern). Technical specifications: - Pressing force: 63 tons - Working area: 1200 mm x 650 mm - Maximum stroke: 160 mm - Maximum daylight between beam and table: 190 mm Dwedpfx Asyryzdspteb The machine is equipped with a user-friendly touchscreen control panel featuring the following functions: - Tool zero-point detection - Force adjustment - Table height adjustment after cutting - Automatic / manual operation - Machine error diagnostics The machine is in excellent technical condition after a complete overhaul, which included: - Replacement of all seals - Replacement of all bearings and traveling rollers - Comprehensive servicing of the hydraulic and mechanical systems - Complete redesign and installation of the electrical system, including safety barriers, safety relays, and PLC panel - Painting and maintenance Supplied with the machine: Original manufacturer’s documentation, wiring diagram of the new electrical installation, and CE Declaration of Conformity. Price available on request. Assistance with transport arrangements available.

Condition: as good as new (ex-display), Year of construction: 2024, Compact, precision CNC rotary table suitable for single-piece or small-batch production in precision engineering. A horizontal or vertical configuration is possible. You can't buy better quality! - Made in Germany - It can be used as a 4th axis on engraving and milling machines for engraving, laser processing, drilling, milling slots, or on tool and surface grinding machines. Square, hexagonal, and gear milling of any pitch, or 3D machining are possible. Precision worm gear with a reduction ratio of 100:1. Output torque well over 25 Nm. The drive is powered by a controlled 1.8-degree stepper motor with 3.2A and a holding torque of 1.2 Nm. The worm and worm gear are manufactured in-house, guaranteeing the highest precision. The pair is mounted on four ball bearings and adjusted for zero backlash, and can be readjusted. The one-piece, stable output spindle is equipped with a faceplate, d=108 mm, with an MK 1 internal taper and a through hole of 10.3 (optional M12 internal thread). The electronic control as a handy module with 14 travel programs and 2 reference point travels as well as step monitoring with a power supply is included in the package. The optimized pre-programming is done in 360 (for milling operation), 180, 120, 90, 72, 60, 45, 36, 30, 20, 10, 5, 1, 0.02 incremental repeat cycles, right and left travel, and cycle pauses, which can of course be programmed. Dwsdpfxed Erdre Aptsb With the software you can: Travel programs and cycles; absolute or incremental travel values. The actual value of the rotary axis can be easily queried at any time using the software. Using an output, you can receive start pulses from an NC machine. Complex scaling divisions, transverse bores or gears can be produced quickly. In addition, you can now use a start pulse to run several different travel angles one after the other. For example, incrementally 30 degrees, then 3 degrees, then 90 degrees, then 1.45 degrees, with or without a pause, or rotate back. Ideal for Hermle, Chiron, DMG Mori, Maho, Deckel FP1, G1, Jung, Mikron or Gravograph. NEW: As an additional option, all 16 travel steps as well as start and reference commands can now be controlled externally by your NC control system using M-functions. Optional: Locking air with splash guard. We can offer standard clamping devices for your applications. Furthermore, we have the possibility to quickly and inexpensively manufacture special clamping devices for you. Special accessories: 3-jaw chuck 80 mm: 125 Euro # 600011 3-jaw chuck 100mm bore 25 mm and an adapter plate (center height adjustment to 80 mm): 300 Euro # 600021 Tailstock: height adjustable 60 - 80 mm: 150 Euro # 600030 Clamping device for ER 25 collet with nut: 125 Euro # 600031 USB data cable for programming via PC: 150 Euro # 600032 Programming of your travel angles: 40 Euro # 600033 Test travel program and test report of the final inspection: 100 Euro # 600036 Collet set ER 25 up to D16 mm 10 pcs.: 125 Euro # 600037 Clamping device for ER 32 collet with nut up to D20: 125 Euro # 600097 Control cable with magnetic switch - read contact for automation without NC machine output: 25 Euro # 600099 Acceptance / Programming / Aluminum case / Software provision: 80 Euro

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Traversing arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, rear side of machine base • 2 T-slots, 18 mm, left side of machine base • Thread cutting unit • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 Distance between T-slots: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table (min): 70 mm Distance spindle nose – table (max): 680 mm Distance spindle nose – floor (min): 970 mm Distance spindle nose – floor (max): 1580 mm Dwsdpfxszrr Uus Aptsb Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacities Drilling capacity (solid): St 60: ⌀ 40 mm GG 22: ⌀ 50 mm Tapping: St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental Measurement units: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram function: yes Machining Cycles Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: cycles for determining reference points by manual probing of the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Centering of cast and flame-cut parts - Angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 3649.63 € Dodezv Ey Sspfx Aptowb 15 mm B 16 214 mm 40 - 4000 U/min 0,54 kW M10 355 mm 485 mm 1027 mm 70 kg 125 - 490 mm 300 x 250 mm 82 mm THE HEIGHT-ADJUSTABLE HEAD MAKES IT IDEAL FOR SHORTER USERS, E.G., FOR TRAINING WORKSHOPS AND SCHOOLS PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 13 / 15 (in E335/ST60) Manal feed Tapping device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front Head height adjustment via toothed rack LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation Art. - No. 212.650 with B16 spindle Art. - No. 212.655 with MK 2 spindle (price on request) OPTIONS: Machine cabinet Drill package

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Dodjvvi I Ropfx Aptowb

Condition: repair required (used), Year of construction: 2008, operating hours: 29,835 h, functionality: not functional, machine/vehicle number: 2337752, Equipment: chip conveyor, The CNC machine is exhibiting the following error: program execution with two tool changes. Up to that point, it ran without any problems. Then, at one point, the second tool change was not performed; instead, the error message "tool changer home position missing" appeared. The auxiliary function and rescue function are not working. Instead, the following error messages appear: "tool holder not open," "tool holder not closed," "tool changer home position missing." After switching on and starting up, the spindle cannot rotate (without compressed air, it can be moved slightly, but it is very difficult to move). After consulting with DMG Mori, it is possible that the pneumatic cylinder used to hold the tool holder is defective, or the spindle itself. Here are the key specifications: DMG DMC 835 V, manufactured in 2007 Main spindle: 10,000 rpm, SK 40 tool holder Working area: X 835 mm, Y 510 mm, Z 510 mm Dwsdpfxjzx A Tbs Aptjb Magazine capacity: 20 tools Work table: Clamping area 1000 x 560 mm Distance between T-slots: 100 mm Load capacity (center): 800 kg (approx.) Table height from the floor: 720 mm Equipped with Heidenhain 530 Operating hours: Control on: 29,835 / Machine on: 28,258 / Program execution: 10,067 / Tool changer: 1,066 In addition, we also have a chip conveyor, as well as various tool holders and milling tools (some of which are new or like new).

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 6939.26 € 133.93 € 20 mm MK 2 260 mm 30 - 3000 U/min 1,5 kW M12 430 mm 715 mm 1800 mm 290 kg 100 mm 110 mm 230 - 850 mm 420 x 340 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 20/23 (in E335/ST60) Main switch Tapping attachement Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation Art. - No. 223.020 R1 (20-2,000 1/min) Art. - No. 223.025 R2 (30-3,000 1/min) OPTIONS (PRICES ON REQUEST): Drill package 3 (vice & keyless chuck) Djdpfxey Hf N Ro Aptjwb Coolant device LED lighting with pivot arm

Condition: used, Point Wexten Precise EA-7A heat exchange unit Dwjdpoy S D Trsfx Apteb

Year of construction: 2003, condition: excellent (used), Working travels 6000x1000x1200mm Dsdpfx Ajd Rz Uvoptowb B-Axis milling head +/-90° Table size 6400x1000mm Spindle taper HSK-100 Spindle speeds -9000 rpm Tool changer 80 pos. Control SIEMENS 840D Coolant through spindle Tool measuring device Zero point clamping system 3R MARCELS MASCHINEN CH

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 15095.86 € 289.84 € 30 mm MK 3 300 mm 0 - 4000 U/min 3 kW M30x3,5 900 mm 610 mm 1980 mm 385 kg 0,10 / 0,16 / 0,25 mm/U 125 mm 150 - 700 mm 590 x 450 mm 125 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button Dwjdpeynnczefx Apteb - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling capacity 30/35 (in E335/ST60) Main switch Dispositif de taraudage Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob Emergency stop button Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation Mechanical feed of the Z-axis incl. electromagnetic clutch for (3) feed rates Drilling cross with pushbutton (on/off) for feed rate In tapping mode: Right-left lifting via drill cross switch or optional foot switch OPTIONS: Drill package 5 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: excellent (used), Year of construction: 2018, operating hours: 7,819 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 2,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 720 mm, nominal power (apparent): 26 kVA, controller manufacturer: Mazak, controller model: SmoothX, workpiece length (max.): 2,500 mm, workpiece width (max.): 820 mm, total height: 3,355 mm, total length: 4,250 mm, total width: 4,046 mm, table width: 820 mm, table length: 2,500 mm, table load: 1,700 kg, rotary table diameter: 500 mm, rotational speed (min.): 18,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 7,819 h, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Continuous 5-axis machining. Cromar particle filter chip conveyor, 15 bar internal cooling, Blum workpiece measurement system. Tool magazine with 30 tool slots. Automatic tool length measurement. Work area mist extraction. TI301 – CNC rotary table (360,000 positions) DS50C-R1-Z. The rotary table can be used as a “C” or “A” axis. Handheld remote control. Schunk zero-point clamping system on the rotary table, including two pallets and a 5-axis machine vise. Dedpfxozhwi As Aptowb

Condition: good (used), power: 340 kW (462.27 HP), first registration: 10/2014, fuel type: diesel, tire size: 315/70 R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 6,150 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, parking air conditioner, parking heater, retarder, second fuel tank, = Additional Options and Accessories = - (Roof) spoiler - Aluminum fuel tank - Bunk - Radio/CD player - Side mirrors with electric adjustment - Sun visor - Digital speedometer = Additional Information = General Information Cab: one and a half License plate: 02-BKG-7 Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Unladen weight: 8,525 kg Axle Configuration Dedszzwqyspfx Aptowb Tire size: 315/70 R22.5 Front axle: Max. axle load: 7500 kg; Tire tread depth left: 20%; Tire tread depth right: 20%; Brakes: Disc brakes; Suspension: Leaf spring suspension Rear axle: Max. axle load: 11500 kg; Tire tread depth left: 20%; Tire tread depth right: 20%; Suspension: Air suspension Condition Technical condition: good Optical condition: good Damage: none

Condition: new, Year of construction: 2025, neu 2025 030138 prompt, Zwischenverkauf v Deutschland 3444.77 € 1 13 mm MK 2 220 mm 40 - 4000 U/min M 10 (steigungsabhängig) 520 mm 400 mm 850 mm 62 kg 60 mm 85 - 370 mm 420 mm 300 x 250 mm 70 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Dwsdpjxcbhrofx Apteb Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Thermal overload protection Spindle stop Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck) ALTERNATIVE: Version with B16 spindle (Art. no.212500)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 5309.85 € 102.48 € Dwjdeynmz Ajpfx Aptob 18 mm MK 2 240 mm 30 - 3000 U/min 0.75 kW M12 (steigungsabhängig) 705 mm 355 mm 1825 mm 195 kg manuell mm/U 82 mm 180 - 870 mm 340 x 280 mm 100 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling capacity 18/20 (in E335/ST60) Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob Manual feed EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS: Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 7/61, Manufacturing origin Swiss Voltage 380/50/3 Netweight abt. 760 kg Dimensions abt. 1250x1000x1700 mm TECHNICAL DATA WORK CAPACITY Travel X and Y 200x200 mm Vertical slide travel 250 mm Travel of drilling spindle 70 mm Max free passage between table and spindle nose 330 mm Free passage between column and centre of spindle 260 mm Max drilling capacity (steel) 10 mm Max reaming capacity 50 mm TABLE Usable surface 400x300 mm Admitted load 100 kg Travels X and Y through motors Number of T-slots 6 (longitudinal) DRILLING HEAD Spindel morse taper 0 Speed of spindle 150-3000 rpm Feed of drilling spindle 0,015 mm/t PRECISION Direct reading on divided drums 0,01 mm Direct reading on verniers 0,001 mm Guaranteed precision on displacement of slide-way 0,002 mm MEASURE Measuring system direct, optical Elements of measure graduated rule, div.1mm Read-out projection screens Djdpfsd Amgksx Aptewb Shifting of zero-point yes Direct read-out 0,001 mm Guaranteed positioning precision 0,002 mm Installed power 1,2 kW errors and omissions excepted data given without obligation Inventory Nr.2160006, machine equipped with : 1 turning table Ø 220 with optical measure 1 centering microscope with 3-points suspension, zoom 40x, lightening 1 centering device with dial comparator cap. 3 mm. MT0 1 centering point MT0 1 tracing tool with spring-mounted point MT0 1 center punch MT0 1 chuck for centering drills MT0 1 self clamping drill-chuck 0-5 mm., MT0 1 boring head type 0, cap. 0.5-30 mm., MT0 1 levelling foot with 2 round levelling supports