Deburring Machine
NKO Anfassystem UZ18 HARDWORKER

Condition

New

Location

Niederlangen Germany

Deburring Machine NKO Anfassystem UZ18 HARDWORKER

Show map

Machine data

Machine type:: Deburring Machine

Manufacturer:: NKO

Model:: Anfassystem UZ18 HARDWORKER

Condition:: new

Price & Location

Location:: 49779 Niederlangen

Call

Details about the offer

Listing ID:: A9180623

Reference number:: 1125-2230015

Update:: 08.10.2024

Description

diameter -- mm
workpiece length -- mm
work piece width 18 mm
range of angles 15° - 50° °
weight of the machine ca. 110 kg

Chamfering system UZ18 HARDWORKER
Maximum bevel width 18 mm with automatic feed
Iodpfx Abok Egrte Ioa

The UZ18 Hardworker machine is one of the most powerful automatic feed beveling
machines on the market. It is not only suitable for workshops, but also for on-
site assembly. The machine has a stepless working angle adjustment system.
Thanks to the special design of the drive system, the UZ18 Hardworker is also
suitable for harder materials. The machine is equipped with the automatic feed.
Working with UZ18 Hardworker is therefore very convenient.

*For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and
aluminum materials
* For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm
* Application range of sheet thickness 6 - 40 mm
* The bevel angle can be easily adjusted continuously from 15° to 50° without
replacing any part
* Double-sided bevel (X, K) with no material handling
* Easy connection to 3D manipulator for easier operation and handling
* Silent working
* Equipped with automatic feeder
* Stationary or mobile use
* The machine works with large workpieces without any support at a speed of 1.9
m/min
* Smaller workpieces are placed directly in the machine

- Max. bevel width (hypotenuse): 18 mm
- Infinitely adjustable angle: 15° - 50°
- Area of application sheet thickness: 6 - 40 mm
- Motor: 750W
- Feed speed: 1.9 m/min
- Weight: 110kg
- Dimension: 438 x 719 x 644 mm

We are happy to offer you an optional 3D manipulator (mobile) for this
device on

Seller

Registered since: 2011

770 listings online

Call

Send inquiry

Telephone & Fax

+49 5939 ... show

Fax:

These listings may also fit your interest.

Listing

Hergensweiler

6,797 km

Welding turn table
ProtecW 10 Ton

Call

Listing

Welding table equipment SIEGMUND Basic-Set 3 / 28

Velen

7,005 km

Welding table equipment
SIEGMUNDBasic-Set 3 / 28

Call

Condition: new, number 65 Positionen 28 mm condition neu weight 49 kg Basic-Set 3: 69 pieces, 28mm system, consisting of: Forceps: 10 x 280604 Iedpfx Abjupw Ste Isa Bolt: 18 x 280511 Stop: 10 x 280420.N Angle: 6 x 280110.G Angle: 4 x 280162.N Threaded bolt 8 x 280543 Stop 8 x 160415 Stop 3 x 284050 Accessory set. 1 x 163999 Price plus packaging and transport.

See details

Listing

Beading & flanging machine Ostas KMRH 4,0

Enschede

7,009 km

Beading & flanging machine
OstasKMRH 4,0

Call

Listing

Moerbeke-Waas

7,214 km

Mini excavator
CASECX19D

Call

Listing

Soest

7,119 km

Horizontal bending machine
ZopfT400

Call

Condition: new, Year of construction: 2025, Maximum pressure: 40 tons Stroke length: 250 mm Maximum speed: 10mm/sec Return speed: 20mm/sec Work table: 660x1250 mm Working height: 900 mm Oil tank: 60 Liter Maximum workpiece height: 250 mm Strip capacity: 200x26 mm Iedpfxohgihko Ab Ioa Pipe capacity: 60x5.0 mm *not with standard tools - Digital limitation of the stroke and the return stroke. - NC control. - Hydraulic pressure adjustable - Bending speed adjustable - Completely closed table - The ZOPF construction makes it possible to change tools quickly and without loss of accuracy - The hydraulic cylinder is mounted on the heavy-duty machine table, which means that even under heavy load there is no loss of accuracy occurs. - With the universal tool holder and the various tools, you can work extremely flexibly.

See details

Listing

DRILLING LINE with HANDLING BIESSE + RBO Techno FDT (2) + Winner (2)

Roreto

6,951 km

DRILLING LINE with HANDLING
BIESSE + RBOTechno FDT (2) + Winner (2)

Call

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° Ijdpfx Abedfgg Ij Ija C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader

See details

Listing

UNLOADER (SINGLE-CAGE) RBO (BIESSE Group) Tornado SC 1300

Roreto

6,952 km

UNLOADER (SINGLE-CAGE)
RBO (BIESSE Group)Tornado SC 1300

Call

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) Ijdscggy Sepfx Ab Ioa - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

See details

Listing

Korschenbroich

7,030 km

Cold Circular Saw
EISELEVMS 4HYD 440

€1,200

Fixed price plus VAT

Call

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Iedsf Dwa Uspfx Ab Isa Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

See details

Listing

Hergensweiler

6,797 km

Welding turn Table
ProtecRB 6000

Call

Listing

Assembly table with height adjustment KK Kletzer Montagetisch SMT 65-105/12M FLEX 2480x1230

Austria

6,349 km

Assembly table with height adjustment
KK KletzerMontagetisch SMT 65-105/12M FLEX 2480x1230

€5,999

EXW ONO plus VAT

Call

Condition: new, messurements (LxWxH): 2480 x 1230 x 65 bis 105width: 1230length: 2480weight approx.: 675 Welding and assembly tables of the SMT flex series are robust, height-adjustable and everyday workstations for processing weighty workpieces, handling electrical tools or chemical or oily substances. The tables can be easily moved using a lifting truck using transport rods in the baseboards and the height can be easily adapted to other working levels. The height adjustment covers a range from 650 mm to 1,050 mm (lower working heights on request). The up to 20 mm thick full steel worktop can also withstand violent impacts or blows, such as those that often occur when working with heavy hand tools or when handling very heavy metal workpieces or tools, without sustained deformations or notches. The metallic worktop allows the unrestricted use of magnetic clamps for fixing components. Due to its high weight, this universal table also ensures good safety against tipping over when heavy objects or tools are placed even in its highest working position. Iedpfxefk Ah Ne Ab Ioa For more information, please follow this link:

See details

Advertise here