CNC Press brake HAP 3050 x 170 to
HAP 170 30/25

Year of construction

2025

Condition

New

Location

Türkei

CNC Press brake HAP 3050 x 170 to HAP 170 30/25

Machine data

Machine type:: CNC Press brake HAP 3050 x 170 to

Model:: HAP 170 30/25

Year of construction:: 2025

Condition:: new

Price & Location

Location:: Türkei

Call

Details about the offer

Listing ID:: A5795529

Update:: 06.03.2026

Description

Delivery ex works Turkey

Bending length (A): 3050 mm
Press force: 170 tons
Sheet thickness 42kgf / mm: 8 mm
Sheet thickness 72kgf / mm: 4 mm
Upper tool: 1260 Top Tool 85 °
Lower tool: 50, 35, 22, 16
Distance between columns (B): 2550 mm
Forward speed: 130 mm / s
Working speed: 8 mm / s
Retraction speed: 120 mm / s
Crowning: manual (CNC-motorized available for an extra charge)
X-axis travel: 750 mm
X-axis speed: 250 mm / s
Backgauge fingers: 2 pieces
Front support arms: 2 pieces
Oil tank capacity: 180 liters
Main motor power: 11 kW
Stroke length (C): 265 mm
Installation height (D): 450 mm
Projection stand (E): 410 mm
Table height (F): 870 mm
Table width (G): 170 mm
Length (L): 4200 mm
Height (H): 2800 mm
Width (W): 2200 mm
Weight: approx. 7500 kg
Cybelec Cybtouch 12 2D Graphic CNC control
3 axes (Y1, Y2, X) expandable with optional R+Z-Axis
Eurostamp 2067 lower tool (V: 50, 35, 22, 16)
Eurostamp 1260 upper tool 85 °
Narrow table
All-steel welded construction
Promecam quick clamping system
CNC-controlled motorized backgauge (X: 750 mm)
Adjustable backgauge fingers
Inch and metric system can be selected
Ground and chrome-plated cylinders
Swiveling control panel
Foot control with anti-panic stop & emergency shutdown
Lateral protective grille (secured with limit switch)
Light curtain on the back of the machine (900 mm)
DSP laser finger protection system at the front (CE)
BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump
Slidable front support arms (2 pieces)
Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON
Nedpfx Alegu N Alshowh
380 V 50 Hz
Painting: RAL 7035, RAL 5015

Optional special accessories available at an additional cost:
-CNC-controlled R-axis (250 mm)
-CNC motorized crowning
-Servo driven motors backgauge system for X + R axis (Mitsubishi)
-Painting in special colors on customer request

Documentation in German or English
CE conformity

Seller

Registered since: 2014

10 listings online

Call

Send inquiry

Telephone & Fax

+49 2595 ... show

These listings may also fit your interest.

Listing

CNC press brake 3200 mm x 125 to NOVAKRAFT PBS-H 125-3200

Wiefelstede

6,930 km

CNC press brake 3200 mm x 125 to
NOVAKRAFTPBS-H 125-3200

Call

Condition: good (used), Year of construction: 2010, Press brake, bending machine, bending machine, swing bending machine, die bending machine -Machine: can be viewed while powered on Nwedpfx Aljxxz E Nehjh -CNC press brake: with 3 axes and laser safety system -Working width: 3200 mm -Pressure force: 125 tons -Max. stroke of the bending beam: 160 mm -Distance between the stands: 2700 mm -Backgauge travel: 590 mm -Backgauge: 2 axes electronically movable, 1 axis manually movable Accessories: see pictures -Installation dimensions: 2140/5195/H2530 mm -Transport dimensions: 1680/5195/H2530 mm -Weight: 9300 kg

See details

Listing

Berlin

6,574 km

Industrial Robot
KukaKR 90

Call

Listing

Bed milling machine STYLE CNC Machines BT 4000 (XYZ:4000x1000x1000 mm)

Bunschoten-Spakenburg

7,113 km

Bed milling machine
STYLE CNC MachinesBT 4000 (XYZ:4000x1000x1000 mm)

€2,49,000

Fixed price plus VAT

Call

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Year of construction: 2025 Condition: Showroom Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm Nwjdpfx Alow Ty S Sohjh - Z-axis: 1000 mm - 26 kW (S6) main motor - 8000 rpm - BT-40 - Automatic tool changer (24 positions) - Remote service (IXON) + network connection - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available

See details

Listing

Travelling column milling machine Mecof MASTERMILL

Torbole Casaglia

6,772 km

Travelling column milling machine
MecofMASTERMILL

Call

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,600 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, table length: 2,500 mm, table width: 2,000 mm, table load: 30,000 kg, spindle motor power: 38,000 W, rotary table diameter: 2,000 mm, feed length W-axis: 1,500 mm, Equipment: rotational speed infinitely variable, CNC travelling column milling machine MECOF EMCO mod. MASTERMILL-HPC3 Heidenhain iTNC 530 CNC control X axis 4,000 mm Z axis (vertical) 3,000 mm Y axis (cross) 1,600 mm Ram section 500 x 500 mm Rapid feeds 30,000 mm/min Rotary-translating table 2,000 x 2,500 mm Table load capacity 30,000 kg Translation 1,500 mm Continuous rotation and translation Automatic bi-rotary head with 360,000 positions A axis 0.001° B axis 3° Spindle taper ISO 50 Maximum speed 6,000 rpm Spindle power 38 kW Tool changer with 80 positions Complete with: Nwodpfxowzxiyj Alhsh - Renishaw tool measurement system - Internal high-pressure coolant 20 bar - Chip conveyor

See details

Listing

Essenbach

6,620 km

Press brake
AMADA PROMECAMHFP NT 100-3

€59,999

ONO plus VAT

Call

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 15,996 h, input voltage: 400 V, overall weight: 6,750 kg, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Nwodetwliwepfx Alhoh Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

See details

Listing

Lithuania

5,956 km

Guillotine shear
CIDANRAPIDO

Call

Year of construction: 2023, condition: new, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. Guillotine RAPIDO is fast reliable shearing machine. Depends on sheets length there are guillotines with different working lengths available: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Machine can do up to 35 cuts per minute. The drive system with eccentrics, pulldown rods, and hold down system which can be positioned as close as 2.5 cm from the knives allow for easy and expedient trimming of narrow strips. RAPIDO guillotine shear is equipped with squaring arms on both sides and the LED cutting line light. Nsdpfx Aeixz D Uelhswh Available working lengths: 2600 mm / 3200 mm / 4100 mm

See details

Listing

CNC cycle-controlled lathe, lathe, automatic lathe, cycle lathe HARRISON Alpha 400 Plus

Hessisch Lichtenau

6,811 km

CNC cycle-controlled lathe, lathe, automatic lathe, cycle lathe
HARRISONAlpha 400 Plus

€7,900

Fixed price plus VAT

Call

Condition: used, CNC cycle-controlled turning machine HARRISON, Type Alpha 400 Plus Machine No. P30180/150 Year of manufacture 1998 Center distance 1250 mm Turning diameter over bed 400 mm Center height 200 mm Turning diameter over cross slide 245 mm Diameter in the crotch 585 mm Bed width 313 mm Cross travel (X-axis) 250 mm Tailstock quill diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill taper MK 5 Spindle bore 54 mm Spindle head size Camlock D1 Size 6 Spindle speed 20-2500 rpm Spindle speed range (Stage 1) 15-275 rpm Spindle speed range (Stage 2) 35-795 rpm Spindle speed range (Stage 3) 110-2500 rpm Feed rate X and Z 0.03 - 0.6 mm/rev Rapid traverse rate X-axis max. 2000 mm/min Rapid traverse rate Z-axis max. 4000 mm/min Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Power connection 400 Volt, 50 Hz, 23.5 kVA - Cycle control Harrison Alpha / GE FANUC - Language in French (France) - Automatic gear range selection in 3 stages (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with different gear ratios (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set of soft jaws - Quick-change tool holder MULTIFIX Size B with 2 inserts - 1 live center - 1 quick-change drill chuck RÖHM, 3-16 mm - Folding chuck guard - Folding work area safety doors - Chip tray with coolant system under the machine bed - Control cabinet fixed to the machine - RS 232 interface Space requirement L x W x H 2600 x 1450 x 1550 mm Weight 1950 kg Nwodjh Hvk Aepfx Alhoh Good condition

See details

Listing

Oxyfuel/plasma cutting system Eckert Cutting Technology Jantar

Rennerod

6,925 km

Oxyfuel/plasma cutting system
Eckert Cutting TechnologyJantar

Call

Condition: new, The Jantar is the most popular model from Eckert Maschinen, known for its dynamic performance and efficiency. It is used by large industrial companies and medium-sized businesses seeking both an economical and reliable solution. The Jantar plasma cutting system can be equipped with plasma and oxy-fuel cutting systems and can be fitted with a wide range of accessories (marking, drilling, and processing of tubes and profiles). The machine's design has been optimized for maximum reliability over the years, as confirmed by hundreds of customers throughout Europe. Key features: •Attractive price for a well-equipped base model •High-dynamic and precise cutting for 2D applications, tubes, and profiles •Cutting performance from 0.5 mm to 100 mm material thickness •Extensive database with pre-defined cutting parameters •Optional extension of the working area length Technical data: Drive: Servo AC Available working widths: 1,500, 2,000, 2,500, 3,000 mm Available working length: Any length from 1,500 mm Positioning speed: 25,000 mm/min Cutting thickness: up to 100 mm Nwedpfx Alsf Alb Aohoh Cutting quality: DIN-EN ISO 9013 Positioning accuracy: DIN-EN 28206 Repeatability: DIN-EN 28206 Electrical systems: DIN-EN 81346 Safety module: DIN-EN 13850 Working height: 740-760 mm Operating ambient temperature: +5 °C to 45 °C Operating humidity: max. 90%

See details

Listing

Rödermark

6,869 km

Hydr. Plate shear
FASTI509-30/4

Call

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Technical data: - max. cutting width 3060 mm - max. cutting capacity at 45 Kp/mm² 4 mm Nodpfx Alst Ucgaehewh - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws - Number of hold-down devices 15 pcs - Stroke rate 23 to 43 /min - Front angle stop - Motorized backgauge position-controlled 15 - 850 mm - Cutting line lighting - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

See details

Listing

Bed milling machine 10400 x 2000 x 1800 mm ANAYAK HVM 11000 DUO

Babberich

7,060 km

Bed milling machine 10400 x 2000 x 1800 mm
ANAYAKHVM 11000 DUO

Call

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 1,00,000 mm, total length: 2,12,000 mm, overall weight: 1,00,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo Njdpfxerx Rxto Alhewh X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

See details

Advertise here