Double Column Drawing Press -Hydr.

OEVERMANN & NIEDRINGHAUS DPS 160 (CE)

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Bedohlnzkspfx Ak Hjlg Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: like new (used), CNC vertical jig boring machine WMW MIKROMAT Travel X: 1120 mm Travel Y: 710 mm Bsdjgy E Dpjpfx Ak Hslg Spindle travel Z: 315 mm Travel W: 630 mm Numerical Command: CNC NUM 1060 Spindle: Ø 125 mm Cone: SA40 Rotation: from 36 to 2240 RPM Table size: 1400 x 900 mm Distance between colums: 1080 mm Maxi distance spindle nose/table: from 0 to 900 mm max Maxi eligible load on table: 1000 kg max Separate electrical panel Machine renewed in 2000 with CN NUM1060 Voltage: 380 V Dimensions (L x W x H): 4000 x 2460 x 3030 mm Weight: approx. 9 T

Year of construction: 1971, condition: good (used), decoiler - expansion mandrel with coil lifting table Bjdpfed Ha E Ssx Ak Hslg strip width: 1.200 mm strip thickness: 0,3 - 5 mm coil weight: 10 t mandrel Ø: 508 mm

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition Blodpfx Aecxxx Rsk Heg

Condition: used, Down table size: 1120x1250mm Technical characteristics: *UP DOWN STROKE 1000 mms *FORWARD BACKWARD STROKE 1200 mms *LEFT RIGHT STROKE 1000 mms Blods Dv Nxopfx Ak Hsg

Condition: ready for operation (used), Year of construction: 1998, power: 37 kW (50.31 HP), pressing force: 250 t, stroke length: 150 mm, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, Very nice and well maintained hydraulic press. 250 tons pressing force. Approximate dimensions: H: 380 cm. W: 200 cm. L: 200 cm. Weight: 16,000 kg. Can be loaded by crane on collection against payment. Bledpfx Ajry Trpjk Hog Transportation can be arranged. Sold for customers. Location: DK-7600 Struer. Make an appointment for a demonstration.

Year of construction: 1980, condition: used, pressure 80 t throat - mm stroke 50 mm table surface area 875 x 695 mm Bodpfsdlcy Hjx Ak Holg ram surface 350 x 355 mm ram adjustment 71 mm no. of strokes 30 - 90 Hub/min distance between columns 450 mm weight of the machine ca. 6,2 t dimensions of the machine ca. 2,0 x 2,1 x 3,2 m daylight (stroke down, ram adjustment above) 480 mm Further information: - the machine is currently being a partially overhauled - the machine was re-equipped with the following components: * separate control cabinet with touchscreen including cabling * new painting of the individual components in the dismantled state After the partial overhaul, the machine is safe for manual insertion open tool, a current UVV test is carried out before delivery and braking time measurement.

Condition: used, Year of construction: 1988, turning diameter over bed 2000 mm turning diameter over slide rest / mm Bjdpfexn Tz Ijx Ak Hjlg turning length / mm - Type 1 K 671 320 F3 - Year of manufacture 1988 (first commissioned in 1998) - Turning length 10,000 mm - Turning diameter over bed 2,000 mm (modified) - Faceplate diameter 1,950 mm - Faceplate clamping range 400 - 1,350 mm - Speeds 1.00 - 140 rpm - Torque 125,000 Nm - Main cutting force 130 kN max. - Automatic swiveling tailstock - Max. workpiece weight 70 tonnes - Max. workpiece weight with steady rest 100 tonnes - Drive power 100 kW - Number of bed ways 4 - Dimensions 22,000 x 6,200 x 2,900 mm - CNC control SIEMENS 840D (2010 for €220,000.00) - Support feed X-Z 0.3 - 4,000 mm/min. - Support rapid traverse X-Z 4,000 mm/min. - Inner cone dimensions 140 x 1:7 - The machine complies with CE guidelines - Includes 2 steady rests, 1 roller block, 4 jaws, boring device - Condition: very good condition

Condition: excellent (used), Year of construction: 2005, Mechanical guillotine shears Fab. Petersen Machinery Type. Cidan HSM-F 20/3 Year 2005 Technical data Make: CIDAN Type: HSM-F 20/3 Sheet width: 2050 mm Sheet thickness: 3 mm Blodju Utaispfx Ak Hsg Cutting angle 2° Connection 400V / 20A Dimensions: approx. L 2.60 x W 1.60 x H 1.40 Weight: approx. 1.5 tons Equipment - Man. Backgauge 750mm - Continuous hold-down device with hard rubber strip - Angle fence - Extendable support table All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: like new (used), functionality: fully functional, grinding length: 650 mm, grinding width: 300 mm, grinding wheel diameter: 160 mm, overall weight: 2,550 kg, power: 4 kW (5.44 HP), Brand: CCP - STANKOIMPORT Model: 3E711B Dimensions to grind: 650x300mm (X, Y) - 320mm (Z) Magnet table surface: 630x200mm Permissible table weight: 150kg Distance spindle axis to table surface: 80 - 445mm Maximum stroke of the grinding head: 365mm Manual table travel: (700mm, 250mm) Table travel speed: 2 - 30 m/mm. Cross traverse speed: 0,01 - 1,5m/mm. Vertical feed rate graduation value: 0,002mm Bljdpfoqy H Dpjx Ak Heg Vertical micro. graduation value: 0,0005mm Transversal feed graduation value: 0,5mm Micro. vertical feed graduation value: 0,001mm Transverse displacement one revolution of the nonius: 5mm Vertical displacement one turn of the vernier: 0.20mm Automatic table traverse feed longitudinal course: 0,2 - 30mm Automatic feed rate for grinding head: 0,002 - 0,08mm Grinding wheel dimensions: 250x76x40mm Minimum grinding wheel diameter: 160mm Spindle motor: 4kw Weight: 2550 kg.