Diesel generator

Olympian GEH200

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR175 Ricardo Motor Newpower Generator Generator set Continuous power: 150 kVA / 120 kW Maximum power: 165 kVA / 132 kW Engine : Kofo RIcardo R6105BZLDS, 6 cylinder water-cooled Connection: circuit breaker, 5-wire direct connection Frequency : 50 Hz Voltage: 400/230 V including mechanical speed control, AVR, battery charger, soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 3130x1130x1810 mm Weight: approx. 1745kg Diesel tank: approx. 250 L At 100% load: approx. 30.80 L/h At 75% load: approx. 23.7 L/h At 50% load: approx. 15.6 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs Automatic switch - On request Sockets - On request Shipment: - Worldwide transport including unloading is possible for an extra charge Lsdpfx Abenkb Uro Usrt - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Solar gas turbine Taurus 65 Solonox (6.3 MWe) ready for delivery. Package description: Taurus 65 8401S (6.3 MWe ISO), Solar RGB & Leroy Somer 6.3 kV generator. Year of manufacture: Package 2011; gas turbine and gearbox replaced with new units in 2022. Engine starts: 14 / Package starts: 399. Running hours (gas turbine & gearbox): 2,423 hours. Location: Spain – unit stored at our indoor, temperature-controlled facility. The genset is currently available in our Zaragoza warehouse. Inspections welcome at any time. Scope of supply: - Main package in container, including: • SOLONOX Taurus 65 gas turbine generator (T65) – 2,423 operating hours • 6,300 V alternator • Control panels • Fire detection module • Gas train • Air inlet filter • Air outlet duct Lredpfxeytpbio Ab Uet • Oil cooler • Gas compressor • 2 x gas storage tanks • Gas compressor cooler - Control system: • On-skid TTS4 Control System (Siemens S7 based) Available documentation: - Official borescope inspection report carried out by Solar following shutdown - Alternator maintenance report - Official Solar certificate confirming replacement of gas turbine and gearbox with new units in 2022 - Official data sheet for the complete package Additional information: - Most recent power generation: end of 2023 - Preservation: stored indoors in temperature-controlled building - Delivery: immediate

Condition: new, pressure: 600bending length: 6050column width: 5100daylight: 680stroke lenght (max.): 455column throat depth: 450messurements (LxWxH): 7100x3275x3910weight approx.: 50.2004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 45Standard Equipment:KK Kletzer Europa We have developed a high-quality model specifically for the European market:The CNC press brake by KK Industries, made in Turkey. Model: KK Kletzer EUROPA XL The powerful EUROPA XL press brake stands out for its high precision, accuracy, and versatile offers a very large open height, resulting in a long cylinder stroke, and an extra-large throat depth to provide maximum flexibility during operations. We focus on delivering quality—reflected also in the control system:As standard, the machine comes equipped with the ESA S640 2D graphic controller. Additionally, the KKI EUROPA XL is equipped with CNC-controlled Y1, Y2, X, and R axes via the wning is also included and fully CNC-controlled through the same ESA S640. When it comes to tooling, we make no machine is fitted with premium top tools and dies from EUROSTAMP Italy. Naturally, a machine is only as good as the service behind t’s why we rely on highly qualified staff with many years of experience in CNC sheet metal processing. Technical Highlights: CNC axes: Y1, Y2, X, and R Controller: ESA S640 (2D graphical interface) Backgauge with double linear guides and ballscrews Motorized CNC-controlled crowning system Heavy-duty height adjustment with handwheel(from 175 tons: on linear guides) Laser safety system on the upper beam CE-compliant safety equipment Leded Ehh Repfx Ab Uort Various options available Optional Controllers: ESA S640 – 15” 2D Touchscreen: ¤ 4,520.00 ESA 675 W – 21” 3D Touchscreen (Windows-based): ¤ 6,485.00 DELEM DA-66T – 17” 2D Touchscreen (Windows-based): ¤ 10,165.00 DELEM DA-69T – 17” 3D Touchscreen (Windows-based): ¤ 16,350.00

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Ledpfsxlngaox Ab Usrt Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: repair required (used), mileage: 2,69,806 km, fuel type: diesel, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, compressor, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, navigation system, parking heater, power assisted steering, power mirror, soot filter, tachograph, tire pressure monitoring, traction control, For sale: a special-purpose vehicle for waste collection, a Mercedes-Benz Econic 2633L with a Zoeller garbage truck body. Vehicle specifications: • Make: Mercedes-Benz • Model: Econic 2633L • Year of manufacture: 2013 • VIN: WDB9576611V234571 • Mileage: approx. 269,806 km • Body: Zoeller – garbage truck • Engine: Diesel • Axle configuration: 6x2 Technical condition: The vehicle starts without any problems. The engine runs, but there is a noticeable knocking sound coming from the engine during operation. A possible cause could be damage to the piston, piston pin, or connecting rod. The vehicle is sold as damaged and requires engine diagnostics and repair. Ledpfszdq R Sjx Ab Ujrt The body is complete, and the visual condition matches the photos.

Condition: used, functionality: unexamined, GENERATOR 200KW-250KVA Lrjdpfx Aev R Eniob Ust OVERALL DIMENSIONS WITHOUT MUFFLER: 440X350X210 (H)

Condition: used, Year of construction: 2004, Technical details: rated capacity: 60 kVA control: Modulsteuerung type of fuel: Biogas weight of the machine ca.: 1,9 t Lodou Nvclspfx Ab Uort dimensions L x W x H: 2,9 x 1,4 x 1,9 m output: 55 KW Functionality unknown. The generator is sold as a spare part donor at a very reasonable price! Ambient temperature 221°F / 105° C Operation via control panel on the control cabinet door. Base frame is a steel construction on which the generator is mounted. Hour counter digital Engine: -4-cylinder; Liebherr type G 924 TI, turbo with intercooling; speed 1,500 rpm. Generator: -VEM Motors; 400 V / 690 V, speed 1,555 rpm; power max. 75 hp / 55 kW. Gas mixer: -RMG Regel- Messtechnik GmbH; type RMG 983-100/50 *

Condition: ready for operation (used), Year of construction: 2000, operating hours: 70,606 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, input frequency: 50 Hz, Equipment: rotational speed infinitely variable, GAS GENERATOR PLANT – CATERPILLAR 3516 (Complete Package) Complete natural gas power generation package, supplied with main auxiliaries and systems. The unit was operating at full load without issues before shutdown. All maintenance performed by authorized service providers, strictly following the manufacturer’s recommended maintenance schedule. Preventive maintenance carried out immediately prior to shutdown (2022): - Inspection/checking of key engine parameters - Bearing lubrication - Oil replacement - Filter changes (oil and air) - Spark plug replacement - Borescope inspection: documentation available Technical specifications: - Electrical output: 1,030 kW - Total operating hours (since new): 70,606 h - Year of manufacture: 1999 - Fuel: Natural gas Scope of supply (included): - Complete genset - Gas train - Control panel - Circuit breaker (alternator + transformer) - Heat exchanger - Silencer - Cooling system (HT aerofan and LT cooling tower) - Lubrication system Lrjdpoytq Eisfx Ab Uet Availability: Immediately The equipment has already been dismantled and is stored in our warehouse, ready for loading or inspection.

Condition: used, Year of construction: 2023, functionality: fully functional, fuel type: diesel, total length: 1,925 mm, empty load weight: 1,800 kg, construction height: 1,361 mm, drive type: Diesel, construction width: 1,110 mm, Other Technical Condition: New Description: Our equipment is regularly serviced and inspected. We offer rental, sales, service, and repairs – you can get everything you need from a single source. Lease-purchase options, financing, and the purchase of used equipment are also possible. Our team will be happy to provide you with expert and personalized advice. Simply call us or send us a message via SMS or WhatsApp. The CAT DE110E2 is an emergency generator for construction sites, industry, and events. With its fuel-efficient diesel engine and robust design, this generator is ideal for providing power during power outages and for mobile and continuous use. Durable, versatile, and easy to operate. You can find more information and submit a non-binding inquiry on our website. Safe working at any height. Lsdpfxsumvb Ie Ab Uort

Condition: new, Year of construction: 2013, power: 1,480 kW (2,012.24 HP), total length: 8,000 mm, total width: 2,200 mm, total height: 2,250 mm, Generator capacity: 2.360 kVA Current frequency: 60 Hz Lrjdpsw Tiyfofx Ab Ujt