Used Optimum D 420 X 1000 for sale (108)

Condition: ready for operation (used), functionality: fully functional, Optimum lathe D330 x 1000 SG -Distance between centers: 1000 mm -Swinging diameter over bed: 330 mm -Swinging diameter over cross slide: approx. 190–200 mm -Spindle bore: approx. 38 mm -Speed range: approx. 70 – 2000 rpm (stepped) -Feeds: longitudinal and cross, automatic -Thread cutting: Metric / Inch -Motor power: approx. 1.5 – 2.2 kW -Voltage: 400 V / 3 phases -Tailstock: MK3 -Spindle: MK5 -Work light -Three-jaw chuck Hodpoztdv Tjfx Akronu -Multifix system with 1 steel holder -Machine feet -Chuck guard Dimensions: L x W x H 1.9 x 0.7 x 1.5 meters / Weight 700 kg

Condition: good (used), Year of construction: 2006, Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: OPTIMUM, Lead screw and feed screw lathe type D320X920 -Machine bed: hardened -Turning length: 930 mm -Turning diameter over bed: 320 mm -Turning diameter without bed: 500 mm -Turning diameter over support: 180 mm -Spindle bore: Ø 40 mm -Spindle speeds: 65 - 1800 rpm -Three-jaw chuck: Ø 160 mm -Tailstock mount: MK3 Hnodpszd Eqyefx Akrsu -Drive: 1.5 kW -Accessories: 2x bezels, Multifix tool holder, see photos -Dimensions: 730/1590/H1310 mm -Weight: 525 kg

Condition: used, Year of construction: 2023, Optimum Optiturn TX 5216V – used machine. - Machine bed made from heavily ribbed cast iron - One-piece steel machine base - High rigidity of the spindle head housing due to heavily ribbed 25GG cast iron - Precisely machined saddle - Shafts mounted on needle bearings, all components lubricated in oil bath - Bed guideways hardened and precision-ground - All electronic controls centrally accessible - All feed gearbox gears made from hardened steel - Handwheels decoupled and tested according to EN 23125 - Dual-channel safety electronics - Switches with lifecycle calculation, tested according to EN ISO 13849 - Complete lead screw and feed shaft guard - Full work area illumination - Service-friendly removable rear panel - Hardened and ground faceplate spindle ensures extreme accuracy and durability - Due to the machine’s high cutting capacity, substantial material removal during rough machining is no problem - Energy chain ensures gentle routing of cables and hoses - Lockable chip guard moves with the saddle, featuring integrated position display and coolant hose, manually adjustable - No change gears required - Equipped with safety device to prevent simultaneous operation of thread cutting and feed mechanisms - Electronic feed shut-off for the Z-axis - Coolant system with separate coolant tank, fill level indicator and oil separator; easy, complete draining and cleaning per DIN - Electrical position shut-off with quadruple position stop - 3-jaw chuck included as standard - Quick-change tool post SWH 7-C - Tool holder 32 x 130 type D for 25 mm square tools - Large spindle bore Dimensions and Weights - Length approx. 2925 mm - Width/depth approx. 1195 mm - Height approx. 1930 mm - Weight approx. 2470 kg Working Ranges - Centre height 260 mm - Centre distance 1600 mm - Swing over bed 520 mm - Swing over cross slide 324 mm - Bed width 350 mm Speed Range - Number of speed ranges: 2 x 3 steps - Spindle speed range: 12 – 1800 rpm Electrical Data - Output power (motor): 7.5 kW - Total connected load: 5.5 kW - Rated voltage: 400 V - Mains frequency: 50 Hz Coolant System - Coolant pump output: 60 W - Data type: Usage data Hnodpjx Hdq Tofx Akreu Tailstock - Mount: MK 5 - Quill stroke: 180 mm - Quill diameter: 72 mm Spindle - Spindle mount: Camlock DIN ISO 702-2 No. 8 - Spindle bore/bar pass diameter: 80 mm - Tool post: SWH 7C - Spindle taper: MK 7 Threading - Metric thread pitch: 0.5 – 15 mm/rev - Number of metric pitches: 55 - Inch thread pitch: 60 – 2 tpi - Number of inch threads: 55 - Diametral pitch: 120 – 4 DP - Number of diametral pitches: 55 - Module thread pitch: 0.25 – 7.5 mm x π - Number of module pitches: 55 Traverse Paths - Top slide travel: 170 mm - Cross slide travel: 340 mm - Carriage travel: 1400 mm Feed - Longitudinal feed range: 0.05 – 1.5 mm/rev - Number of longitudinal feeds: 55 - Cross feed range: 0.025 – 0.75 mm/rev - Number of cross feeds: 55

Year of construction: 2016, condition: ready for operation (used), A barely used surface grinding machine Optimum is available. Grinding width: 220mm, grinding length: 470mm, grinding height: 350mm, table dimensions X/Y: 210mm/450mm, max. table spindle center distance: 450mm, grinding wheel dimensions X/Y/Z: 200mm/13mm/31.75mm. Machine dimensions X/Y/Z: approx. 1200mm/1450mm/2000mm, weight: approx. 800kg. Dokumentation vorhanden. An on-site inspection is possible. Hnodpfxjxx Udlj Akrju

Year of construction: 2009, condition: ready for operation (used), A CNC flatbed lathe Optimum is available. Swing diameter over bed/slide: 280mm/170mm, center distance: 700mm, spindle bore: 27mm, speed: 4000rpm, travel X/Z: 165mm/660mm, feed X/Z: 2m/min/3m/min, tool stations: 4, quill stroke: 85mm. Machine dimensions X/Y/Z: approx. 2000mm/750mm/1550mm, weight: approx. 450kg, control: Siemens Sinumerik. Documentation available. An on-site inspection is possible. Hnjdpfx Aoyypliskreu

Condition: ready for operation (used), Year of construction: 2026, Optimum 275 N demonstration machine Model: Opti S 275 N Technical data: Cutting range 0 degrees, round: diameter 225 mm Cutting range 0 degrees: 245 x 180 mm / rectangle Cutting range 45 degrees, round: diameter 160 mm Cutting range 45 degrees: 160 x 160 mm / rectangle Cutting range 60 degrees, round: diameter 100 mm Hnodpfjztcydex Akrou Cutting range 60 degrees: 100 x 100 mm / rectangle Saw bow lifting: manual Feed: steplessly adjustable Errors and omissions excepted.

Condition: used, Year of construction: 2017, bore capacity in steel (diameter) 40 mm throat 285 mm bore stroke 160 mm Spindle Speed 150-2.000 U/min. spindle taper MK4 column diameter 115 mm total power requirement 1,5/2,2 kW Hodpfszpzdasx Akronu weight of the machine ca. 275 kg dimensions of the machine ca. 1000x700x1900 mm

Condition: new, Year of construction: 2010, Center of spindle to wall or column 235 mm Column diameter 60 mm Hnodpfx Aow Spc Rjkrju Size of table plate 290 x 290 mm Motor output 1 kW Speed 50 - 4000 U/min. weight of the machine ca. 72 kg

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 100 h, OPTIMUM OPTIdrill DH 40 GP geared drill press – in top condition – used sparingly For sale is a high-quality OPTIMUM OPTIdrill DH 40 GP geared drill press in very well-maintained condition. The machine comes from a private workshop and has only been used occasionally; it is not a production machine intended for continuous use. It functions perfectly and can, of course, be inspected and tested on site. Technical data: - Manufacturer: OPTIMUM - Model: OPTIdrill DH 40 GP - Drilling capacity in steel: 40 mm - Geared drill press with mechanical speed change - Automatic quill feed - Right/left rotation - Precise column and solid worktable - MK4 spindle mount Hedpfx Ajztl Tmokronu - Coolant system (if available) - Operates on 400 volt three-phase power Condition: - Technically perfect - Very well-maintained - Low operating hours - No backlog of repairs - Ready for immediate use The quality of OPTIMUM is well-known in the professional sector. The DH 40 GP is a stable, durable machine with high precision. New price: 3,804 Inspection: The machine can be inspected and tested under power by appointment. Loading can be assisted upon agreement. Private sale, no warranty or returns.

Condition: used, Year of construction: 2014, throat 180 mm quill stroke 80 mm continious capacity 20 spindle taper MK 2 table-size 280 x 245 mm height of the machine ca. 1000 m column diameter 73 mm distance spindle /table max. 425 mm Hodjxbtrgopfx Akronu dimensions ca. 615 x 330 x 1015 mm weight ca. 60 kg incl. vice HM Müller HT100P

Condition: excellent (used), Year of construction: 2014, Cutting capacity, circular: 255 mm Cutting capacity, rectangular: 315 x 230 mm Cutting capacity, square: 230 mm Cutting capacity, miter cut at 45° circular: 160 mm Saw blade dimensions: 27 x 0.9 x 2750 mm Hnjdpfx Akoznh Nmorju Saw blade speed, continuously adjustable: 20 - 90 m/min Saw blade drive: 400 V, 1.5 kW Space requirement: 1800 x 1600 x approx. 1800 mm Weight: 380 kg

Condition: as good as new (ex-display), Year of construction: 2020, The machine is on display and has only been used for demonstration purposes. Optimill F 120X CNC milling machine, directly from the manufacturer. F 120X – The OPTIMUM CNC milling machine equipped with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. - Heavy-duty design - High productivity - Linear guides for high rapid traverse speeds on all axes - 21-position tool changer magazine - High reliability - Meehanite quality cast-iron construction - Cross table, precision-ground with 3 T-slots - Strongly ribbed, torsion-resistant machine base - Precision-ground, preloaded high-performance ball screws on all axes - High-torque servo drives mounted directly on the ball screws on all three axes - Electronic handwheel - Chip conveyor - Cleaning pistol - RJ45 connection, USB port, and power connection (230V) - Coolant system with 210-litre coolant tank - Heat exchanger Included options: - PPU 290 touch panel - 16,000 rpm inline spindle with oil cooler - Belt conveyor with chip trolley Machine leasing available via Siemens Finance; liquidity required. Dimensions and Weights - Length approx. 2,315 mm - Width/depth approx. 2,194 mm - Height approx. 2,325 mm - Weight approx. 3,800 kg Drilling/Milling Capacity - Maximum cutter head size: 80 mm Feed/Rapid Traverse Speed - X-axis: 40,000 mm/min - Y-axis: 40,000 mm/min - Z-axis: 40,000 mm/min Electrical Data - Connection voltage: 400 V - Number of phases: 3 - Current type: AC - Mains frequency: 50 Hz - Electrical connection - Total connected load: 45 kVA Vertical Spindle to Table Distance - Minimum: 150 mm - Maximum: 450 mm T-slot Size: 14 mm Number of T-slots: 3 T-slot pitch: 125 mm Maximum table load: 250 kg Accuracy - Repeatability: ± 0.006 mm - Positioning accuracy: ± 0.005 mm Coolant System - Coolant pumps - Each pump drive power: 370 W - Tank capacity: 120 l Control - Type: Sinumerik 828D PPU 290 - System software: SW 28x - CNC memory: 8 MB - Block change time: 2 ms - Look ahead: 150 - Number of tools: 512 Hjdpfx Aoymkbqokrsnu Travel Range - X-axis, automatic: 500 mm - Y-axis, automatic: 400 mm - Z-axis, automatic: 300 mm Vertical Spindle - Spindle taper: BT 30 - Speed range: 10 – 16,000 rpm - Main drive power (continuous S1): 12 kW - Main drive power (S6-30% operation): 22.8 kW - Main drive torque (continuous S1): 38 Nm - Main drive torque (30% operation S6): 116 Nm Feed Motor Torque - X-axis, continuous S1: 6 Nm - Y-axis, continuous S1: 6 Nm - Z-axis, continuous S1: 11 Nm Servo Tool Changer - Design: Carousel in front of the spindle - Number of tool stations: 21

Condition: defective spare-parts repository (used), Year of construction: 2016, functionality: not functional, power: 2.2 kW (2.99 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 295 kg, We are selling our used Optimum machine. The motor has a defect in the winding. The machine can be inspected and collected in Hoppegarten. Hsdpfxezxp Nvo Akrenu No warranty, no guarantee, no returns.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 1,600 rpm, travel distance X-axis: 368 mm, travel distance Z-axis: 2,900 mm, total height: 1,925 mm, total width: 1,525 mm, overall weight: 3,820 kg, product length (max.): 5,278 mm, number of axes: 2, Horizontal turning machine manufactured in 2022. This Optimum OptiTurn TH 8030D features a maximum swing diameter of 800 mm and a turning length of 250 mm. It includes a robust spindle chuck and a rapid motion speed of 3800 mm/min. If you are looking to get high-quality turning capabilities, consider the Optimum OptiTurn TH 8030D machine we have for sale. Contact us for further details regarding this machine. • Type and highlights • Leading and traction spindle lathe, high flexibility, precision and cost-effectiveness • With digital position indicator prepared (see Additional equipment) and quick-change steel holder (see Additional equipment) • Shipping information • Packaging metrics: Length 4770 mm, Width 1150 mm, Height 1840 mm • Weights: Gross 4480 kg, Net 3870 kg • Technical data • Load bearing capacity 1,4 t/m • Work areas: • Max. height 400 mm • Swing diameter above machine bed 800 mm Hodpfxsyxncdj Akronu • Swing diameter above planing slide 570 mm • Bed width 400 m • Max. width 3050 mm • Swing diameter in bed bridge 1035 mm • Turning length in bed bridge 250 mm • Speed range: • Number of gears 16 • Fast motion speed: • Rapid motion speed 3800 mm/min • Explanations about rapid motion max. 5 min (30 min. break) • Electrical data: • Drive motor output 11 kW • Supply voltage 400 V • Mains frequency 50 Hz • Electrical connections: Total rated value 12 kW • Cooling lubricant system: • Coolant pump output 150 W • Spindle: • Spindle chuck Camlock DIN ISO 702-2 No. 8 • Spindle bore/rod passage diameter 105 mm • Spindle cone Ø113 (cone 1:20) mm • Tool holder max. chuck height 32 mm • Tailstock: • Tailstock chuck MK 5 • Tailstock quill stroke 235 mm • Tailstock quill diameter 90 m • Pitches: • Metric pitch 0,45 – 120 mm/rev (54 pitches) • Imperial pitch 80 – 7/16 Gg/1" (60 pitches) • Diametrical pitch 7/8 – 160 (42 pitches) • Modular thread pitch 0,25 – 60 mm/rev (46 pitches) • Travel: • Travel upper slide 230 mm • Travel carriage saddle 2900 mm • Travel cross slide 368 mm • Feed: • Longitudinal feed range 0,044 – 1,48 mm/rev (25 feeds) • Flat feed range 0,022 – 0,74 mm/rev (25 feeds) • Design features and safety • Hardened and ground Z-axis guideway • Spindle mount Camlock DIN ISO 702-2 No. 8 • Precisely crafted sled; all guides adjustable by wedge strips • Adjustment range upper slide ± 90° • Guaranteed concentricity of the spindle nose better than 0.015 mm • Waves, wheels and main spindle running in oil bath • Gear wheels smooth, hardened and ground with 2 adjustable precision tapered roller bearings • Clear selection lever for switching the feed rates • Closed design of the rapid-action feed gear • Gears and shafts hardened and ground in an oil bath in precision bearings • Handwheels decoupled and tested according to EN 23125 • Two-channel right-left switch tested to EN 23125 • Switch with life cycle calculation, tested according to EN ISO 13849 • Right/left rotation on bed carriage via switching spindle switchable • Central lubrication in the bed slide • Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN • Leading spindle • Emergency stop blow switch, motor protection switch, lockable main switch • Emergency stop device with foot control • Safety handwheels with release function in the X-axis • Handwheels with adjustable fine scale 0.04 / 0.02 mm • Tailstock for taper turning ± 10 mm adjustable • Tailstock quill and handwheel with adjustable fine scaling

Condition: used, Year of construction: 2024, Optimum Optisaw SD500AV – Vario Bandsaw with Siemens Inverter Used bandsaw with signs of wear Heavy-duty industrial design Smooth, low-noise operation Manual or semi-automatic operation Infinitely variable saw band speed from 20–80 m/min High cutting precision due to vibration-free running Mitre adjustment from -45° to 60° by swivelling the entire saw bow Supplied as standard with high-quality bi-metal saw blade Microswitch for automatic shut-off Coolant pump Ball bearing saw band guide with carbide inserts for optimal cutting results Easy setting of descent speed via feed rate control valve on the control panel Large, hydraulically operated quick-action vise, self-closing, laterally adjustable Manometer for correct saw band tension Clearly arranged control panel Semi-automatic operation functionality: Closing of the vise and activation of the motor Lowering of the saw bow for cutting Stopping of the motor and return of the saw bow to its home position Dimensions and weights Length approx.: 2129 mm Width/depth approx.: 1046 mm Height approx.: 1687 mm Weight approx.: 645 kg Hedpfx Aex Dzv Eokrsnu Electrical data Output (motor power): 3 kW Hydraulic pump motor power: 1.4 kW Coolant pump motor power: 0.1 kW Total connected load: 3.8 kW Supply voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 20–80 m/min Saw band length: 3770 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Cutting angle range: -45 to 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Continuous real-time data acquisition: Yes Data storage location: On device Data access: Via wireless interface Cutting capacities 0° round (solid): 355 mm 0° square (solid): 300 mm 0° rectangle upright (solid): 300 x 490 mm -45° round (solid): 290 mm -45° square (solid): 250 mm -45° rectangle upright (solid): 250 x 250 mm +45° round (solid): 350 mm +45° square (solid): 290 mm +45° rectangle upright (solid): 290 x 340 mm +60° round (solid): 230 mm +60° square (solid): 180 mm +60° rectangle upright (solid): 180 x 220 mm Explanation cutting capacity: Cutting capacity determined with aluminum based on saw bow weight. May vary when processing different materials and may be smaller in certain cases (this is not cutting capacity in the strict sense).

Condition: like new (used), Year of construction: 2015, Manufacturer: OPTIMUM Maschinen Germany GmbH Model: F 150 Machine type: 3-axis CNC machining center Hnedpfxoy Ia Uwo Akrou Serial number: 1521211505 Year of manufacture: 2015 Control: Siemens Sinumerik 828D Travel X/Y/Z axes: approx. 750 / 500 / 500 mm Tool holder: BT40 Spindle power: 12 kW Spindle power S1: 9 kW Total power: 25 kW Power supply: 400 V / 50 Hz T-slot worktable: approx. 800 × 450 mm Equipment: Integrated automatic tool changer Integrated chip conveyor Machine weight: approx. 3,520 kg

Condition: used, Year of construction: 2014, x-travel 0600 mm y-travel 270 mm Hsdpfxoz R D Eno Akrenu z-travel 430 mm table-size 1120 x 260 mm spindle turning speed range 40 - 1600 U/min spindle taper SK 40 feed in x - axis 50 - 1000 mm/min feed range Z-direction 24- 402 mm/min rapid traverse x + z axis 1 m/min rapid motion - y-axis 1 m/min drive capacity - spindle motor 2,2 kW total power requirement 3,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 1,7 x 1,4 x 1,75 m Accessories: DRO and machine vice.

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. OPTIMUM F 200 HSC Premium CNC milling machine, directly from the manufacturer. F 200 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system is characterized by its performance, speed, precision, and long service life. Heavy-duty design · High productivity · High reliability · Heavily ribbed, torsion-resistant machine base · Profile rail with recirculating roller guides for high rapid traverse speeds in all axes · Powerful servo drives in all three axes · Telescopic guide cover on all three axes · Automatic lubrication · Solid, precise milling table with five T-slots, large dimensions, and precision-ground surface · The portable, electronic handwheel with feed override button and emergency stop switch facilitates the easy execution of programs Nwswouy Tckex Eb Ncsi · Coolant system with chip flushing system and cleaning gun · Spindle internal cooling with 20 bar · Chip conveyor in belt design ensures efficient chip removal · Chip cart · RJ45 connection and power connection 230 V · Enclosed control cabinet with integrated heat exchanger ensures optimal temperature and prevents the ingress of dirt particles · Machine light in the work area · Additional package SIEMENS material defect liability and free online/on-site service OSS Plus · 1 year maintenance contract Basic included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected power 20 kVA Milling spindle Drive motor S1 operation 10.5 kW Torque of drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque of drive motor S6-30% operation 125 Nm Spindle mounting SK 40 / DIN 69871 Coolant system Performance of coolant pumps, 3 pieces 1 kW Flow rate 35 l/min Tank capacity 200 liters Cleaning pump Performance of cleaning pump 530 W Milling accuracy Repeatability ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Type Double-arm gripper Number of tool positions 24 Tool diameter max. 78 mm Tool diameter (auxiliary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time for tool change: Tool to tool 2.5 seconds Travel range X-axis 850 mm Y-axis 500 mm Z-axis 550 mm Feed drive Rapid traverse X, Y, Z axis 48 m/min Torque motor X/Y/Z axis 16 Nm / 16 Nm / 20 Nm Feed forces X/Y/Z axis 5.34 kN / 5.34 kN / 6.68 kN Speed range Hjdpfx Akozi Ex Uerjnu Speeds* 12,000 min-1 Pneumatics Air pressure 6 - 8 bar Air consumption per hour 6 - 8 kg/m³ Milling table Distance spindle - table 100 - 650 mm Table length x width 1,000 x 500 mm T-slot size / number / spacing 18 mm / 5 / 100 mm Load capacity max. 500 kg Dimensions Length x width x height 2,400 x 2,355 x 2,860 mm Total weight 5,500 kg

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 Hedpfx Akjk Egrpjrsnu - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 820 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 400 mm, total height: 2,300 mm, total width: 2,160 mm, table width: 254 mm, table length: 1,370 mm, table load: 300 kg, overall weight: 1,260 kg, spindle speed (max.): 4,200 rpm, product length (max.): 2,400 mm, number of axes: 3, This 3-axis Optimum MF 4-B was manufactured in 2018. It features a maximum drilling capacity of 24 mm and a cutter head size of up to 76 mm. The machine includes a robust cross table size of 1370 x 254 mm and a maximum spindle speed of 4200 rpm. If you are looking to get high-quality milling capabilities, consider the Optimum MF 4-B milling and drilling machine we have for sale. Contact us for further details. - Description: 3-axis manual conventional milling and drilling machine with sleeve feed, tiltable milling head, rotatable spindle head carrier and position indicator- Face Cutter Capacity: max. Ø 76 mm- End Mill Capacity: max. Ø 25 mm- Drilling Capacity (Steel S235JR): Ø 24 mm- Continuous Drilling Capacity (Steel S235JR): Ø 20 mm- Throat Depth: 0 - 420 mm- Quill / Sleeve Stroke: 127 mm- Spindle Taper: ISO 40 - DIN 2080- Spindle Speed: 60 - 4200 rpm (min-1)- Gear Steps: 2 / continuously variable in steps- Automatic Quill Feeds: 0.04 | 0.08 | 0.15 mm/rev- Motor Power: 2.2 kW | 400 V - 50 Hz- Milling Head Tilt (Front / Back): +/- 45 degrees- Milling Head Tilt (Left / Right): +/- 90 degrees (horizontal)- Ram Overarm Travel: 470 mm- Distance Spindle to Table: max. 405 mm- Table T-Slot Size / Pitch / Qty: 16 mm / 63 mm / 3- X-Axis Travel (Manual / Power Feed): 820 mm / 740 mm- Y-Axis Table Travel (Manual / Power Feed): 410 mm / 330 mm- Z-Axis Knee Travel (Manual / Power Feed): 400 mm / 320 mm- Main Motor Power: 2.2 kW (400 V / 3 Ph / 50 Hz)- Coolant Pump Power: 90 W- Included Accessories: Coolant system, chip tray, and operating tools Technical Specification Taper Size ISO 40 Hedezq Dk Ejpfx Akrsnu

Condition: good (used), Year of construction: 2018, travel distance X-axis: 800 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, spindle speed (max.): 5,100 rpm, spindle speed (min.): 10 rpm, table width: 230 mm, table length: 1,245 mm, type of input current: three-phase, overall weight: 950 kg, input voltage: 380 V, Used turret milling machine Brand: Optimum Model: OPTIMILL MF 2V Year: 2018 Weight: 950 kg Swiveling head with Siemens variable speed drive. 3-axis dimension display. Type: Turret milling machine with swiveling head ±90° (left/right) and tilting ±45°. Spindle taper: ISO 40 (DIN 2080 / DIN 69871) Speeds: Continuous electronic variable speed drive (typically 10 to 5,100 RPM). Table surface: 1,245 x 230 mm Hnjdpfx Aez Ducvekreu Travel (X / Y / Z): 800 mm / 305 mm / 406 mm Motor power: 3.7 kW (Three-phase 380V) Automatic quill feeds: 3 Automatic motorization in X and Y axes with variable speed control and rapid traverse mode. Machine complies with CE regulations.

Condition: good (used), Manufacturer: Optimum Type / Model: DDP 50 Pressing force: 1.5 t Table: mm ram: 50 x 50 x 647 mm Hnsdordgrkjpfx Akrou Projection: 226 mm Lever length: 850 mm Plunger stroke: max. workpiece height: 459 mm Accessories/equipment: Condition: good Weight: 167 kg Dimensions: 650 x 370 x 785 mm

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Robust drilling machine featuring a powerful OPTIMUM brushless drive. Key highlight: menu-guided control for operating modes drilling/tapping. - Smooth-running and high-performance brushless drive - Optimal power transmission via aluminium pulleys combined with a toothed GATES quality V-belt - High running smoothness thanks to precision-ground multi-spline drive - Concentricity guaranteed at less than 0.015 mm, measured at the quill - Drilling spindle with precision ball bearings - Membrane keypad; dust- and water-resistant, easy to clean - High-quality OPTIMUM quick-action drill chuck included as standard - Separate emergency stop pushbutton - Precisely machined worktable with diagonal T-slots, 360° rotatable - Integrated coolant channel surrounding the worktable - Large, height-adjustable safety guard with interlock switch for maximum operator protection - Drilling depth stop - V-belt guard with safety switch - V-belt tensioning mechanism - Solid, large base plate with reinforced ribs at the rear Technical specifications: Column diameter: 60 mm Dimensions (LxWxH): approx. 552 x 445 x 850 mm Weight: approx. 64 kg Drilling capacity (steel): 18 mm Hnedjw Rhk Repfx Akreu Continuous drilling capacity (steel): 16 mm Tapping capacity (steel): M10 Table size: 230 x 245 mm Speed range: 100 – 6000 rpm Number of speed ranges: 5 Total power connection: 1.5 kW Mains voltage: 230 V Quill stroke: 65 mm Spindle taper: MT 2 Throat depth: 130 mm Including quick-action drill chuck 1–13 mm Including machine vice BMP 100 Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, SIEMENS 828D control system with USB interface and LCD screen Table dimensions: 1200 x 600 mm T-slot size: 16 mm Number of T-slots: 5 Hedpfoz Ih E Eex Akronu T-slot distance: 100 mm Max. load capacity: 800 kg X-axis automatic travel: 1050 mm Y-axis automatic travel: 600 mm Z-axis automatic travel: 600 mm Spindle taper: SK40 DIN69871 Speed range: 10,000 rpm Tool magazine: 30-station Drive power: 11 kW Power requirement: 400V / 40 kVA / 3 x 32A Weight: approx. 7000 kg Dimensions (LxWxH): 4319 x 2300 x 3000 mm Features and accessories - SHOPMILL module in the control system - Chip conveyor - Coolant system - Portable handwheel - LED lighting - Spindle cooler - Manuals The machine is being sold due to company liquidation. Very good condition. Under power in our showroom.

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition. Optimill F 110 HSC Premium CNC milling machine direct from the manufacturer. F 110 HSC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and a long service life. - Heavy-duty design - High productivity - High reliability - Heavily ribbed, torsion-free machine base - Profiled rail with recirculating ball bearing for high rapid traverse speeds in all axes - High-torque servo drives in all three axes - Telescopic guideway cover on all three axes - Automatic lubrication - Massive, exact milling table with three T-slots, large dimensions and precision-ground - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to the run-in of programs considerably - Coolant device with chip flushing system and cleaning gun - Chip conveyor in belt design ensures efficient chip removal - Chip trolley - RJ45 plug connection and 230 V power connection - Closed switch cabinet with integrated heat exchanger ensures optimum temperature and prevents the ingress of dirt particles - Machine light in the work area - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus - 1-year Basic maintenance contract included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected load 15 kVA Milling spindle Drive motor S1 operation 9 kW Torque drive motor S1 operation 57 Nm Drive motor S6-30% operation 21.2 kw Hedpfxsymka Ho Akrsnu Torque drive motor S6-30% operation 135 Nm Spindle holder SK 40 / DIN 69871 Internal spindle cooling option Drive motor S1 operation 10.5 kW Torque drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque drive motor S6-30% operation 125 Nm Cooling lubricant system Power of the coolant pumps, 2 pieces 900 W Delivery rate max. 35 l/min. Tank capacity 116 liters Cleaning pump Power of the cleaning pump 530 W Milling accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Double arm gripper type Number of tool positions 20 Tool diameter max. 78 mm Tool diameter (secondary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time tool change: tool to tool 2.5 seconds Travel distance X-axis 650 mm Y-axis 400 mm Z-axis 500 mm Feed drive Rapid traverse X-, Y-, Z-axis 48 / 48 / 32 m/min. Motor torque X- / Y- / Z-axis 11 Nm / 11 Nm / 20 Nm Feed forces X- / Y- / Z-axis 3.67 kN / 3.67 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 bar Air consumption per hour 6 - 8 kg/m³ Milling table Distance spindle - table 100 - 600 mm Table length x width 850 x 400 mm T-slot size / number / distance 18 mm / 3 / 100 mm Max. load 400 kg Dimensions Length x width x height 2,100 x 2,300 x 2,750 mm Total weight 4,300 kg