Die-Sinking EDM Machine

OPS INGERSOLL Gantry 1200

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 amps - multipulse Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-way pick-up plate changer Work container (W x D x H): 1770 x 1270 x 680 mm Lhsdpfxsx Ryzve Adwjb Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Lsdew Ucyuspfx Adwjhb Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 amps - multipulse Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Lodpfx Adoxf Ezuewshb Electrode changer: 30-way pick-up plate changer Work container (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Condition: excellent (used), Year of construction: 2011, Control PC-NC Dialog Travel paths X/Y/Z: 1000/1510/700 mm C-axis 30-way electrode changer Ljdpfjwhrgrox Adwshb Hirschmann clamping system Support surface WxD 1140/1640 mm Load capacity 7500 kg Filter system Fire extinguishing system

Condition: excellent (used), Year of construction: 2003, Demag Ergotech - system 250/280-80 Closing 25 TO Scrow 25mm Year of manufacture 2003 Ledpjhrw Amsfx Adwshb Sprue picker 2x PIECES

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 amps - multipulse Lhodpfx Ajxpvhaodwjb Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-way pick-up plate changer Work container (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 576409, OPS INGERSOLL GANTRY EAGLE 1200 Year of construction 2017 Machine No. 576409 Standard Specifications 1.01 Eagle Powertec PC/NC * Multiprog Powertec technology programming on PC/NC and as CD (external programming place) * Powertec Easy Burn high-speed programming * Powertec Handheld - multi-functional hand control device * Manual eroding with Powertec Handheld * Interfaces Ethernet and USB 　 * Multi-control light (remote maintenance via Internet), free of charge during the guarantee period 1.02 Eagle Powertec fine finish generator PT60 1.03 Eagle Power Jump with 18m/min interval speed in the Z-axis 1.04 Pressure flushing programmable, suction connection manually 1.05 Filter unit, 32m² paper filter 1.06 Compressor cooler 1.07 CO2 fire-extinguishing system 1.08 Color: Structural lacquer in cobalt-blue (RAL5013), grey (ral 7045), yellow (RAL1021) 1.09 Machine shoes Lsdpfswu Hb Rox Adwehb Feature Specification XYZ travels 1 000 × 1 500 × 700 mm Tank size 1 270 × 1 770 × 680 mm Table size 1140 ×1640mm Table load capacity 7 500 kg Max head load 300 kg Rapid traverse 5 000 mm/min High-speed Z jump 18 000 mm/min (18 m/min) CNC Control Dual 32-bit PC, touchscreen, USB/Ethernet Generator (PT60) Adaptive current, 60 A Dielectric volume & filter 2 400 L, 32 m² filter Machine size & weight 2 950 × 3 950 × 3 440 mm, ~12 000 kg

Condition: used, Year of construction: 2009, functionality: unexamined, machine/vehicle number: 73136, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 720 mm, nominal power (apparent): 64 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 3,150 mm, total length: 5,605 mm, total width: 4,290 mm, overall weight: 12,600 kg, spindle speed (min.): 15,000 rpm, operating hours of spindle: 21,786 h, number of slots in tool magazine: 46, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of Manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in operational condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 touch probe. Operating Hours (Readout): Control powered on: approx. 112,194 h Machine powered on: approx. 72,272 h Spindle running: approx. 21,786 h Programs: approx. 21,654 h Condition: Used machine with normal signs of use, technically operational. Inspection under power possible by arrangement. Work Areas Travels: X-axis: 1,350 mm Y-axis: 1,150 mm Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle Standard spindle 15,000 rpm Speed range: 0–15,000 rpm Acceleration to max. speed: approx. 2.5 s Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) Torque: 193 Nm (S6 = 40% duty cycle) Tool holder: HSK-A63 (DIN 69063-1, option ISO-B40/DIN 69871) Max. tool diameter: 130 mm (fully equipped) Bearing: Ceramic hybrid Ø 70 / Cronidur steel Lsdox Eh Iqjpfx Adwehb Lubrication: Lifetime lubricated Cooling: Water-cooled with corrosion inhibitor Feed Drives Feed motors: AC Rapid traverse / working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle/hour) Position measuring systems X/Y/Z: Linear scales (direct) Rotary Table Clamping surface: Ø 1100 × 1000 mm, flattened on the side Table load: 1,600 kg T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm pitch) Centering bore: Ø 50 H6 Clamping torque: 8,000 Nm Max. mass moment of inertia: 75 kg·m² Table elevation above floor: 1,120 mm Table drive: Direct torque motor Drive torque: 1,600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) NC swivel range: +16° to −120° Measuring system: direct, absolute Clamping principle: hydraulic, stepless Max. swivel speed: 4,000 °/min Max. working swivel torque: 600 Nm (S6 40%) Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer 46-position magazine (installed as per documentation) Magazine positions: 46 Tool holder: HSK-A63 (DIN 69063-1), option ISO-B40 Max. tool diameter: 80 mm (fully loaded) 130 mm (partially loaded) Max. tool length: 300 mm Max. tool weight: 8 kg Magazine loading: 200 kg Tool change time (vertical): 11 s Coolant / Chip Disposal External coolant supply (AKZ): 40 l/min, 2.5 bar Internal coolant supply (IKZ) Electrical Data: Installed rated power: 75 kW Connection power: 58 kW Connected load: 64 kVA Control voltage: 24 V DC Operating voltage: 3 × 400 V, 50 Hz Protection class: IP54 Dimensions & Weight Machine weight: approx. 12,600 kg (without accessories) Required space (L × W × H): 5,605 × 4,290 × 3,150 mm

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 650 mm, workpiece weight (max.): 7,500 kg, total height: 3,900 mm, total width: 2,950 mm, total length: 3,430 mm, Equipment: documentation/manual, For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered. For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. Lsdpfx Aevwa Nbsdwohb The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered.

Condition: excellent (used), Year of construction: 2002, OKUMA Euro Center V50 Year of construction 2002 Control system OSP-U100L Travel distances X-1020 Y-510 Ljdsrfw Nhopfx Adwshb Z-525 Table load 680kg Clamping surface 1200x510 Tool changer 20 magazine places chip conveyor