Oriental Motor Motor

Oriental Motor M425-401 Max. Output 25W 100V~ 50/60Hz 0,8A WY9

Condition: like new (used), Year of construction: 2021, Fabric cutting machine Lectra VIRGA.FA.CUT.MOTIF-E, year 11/2021, useful width 1.70 cm. Single cut, specific machine for cutting lines, squares and panels. Hours worked 86. Connected machine available for any tests. Kdedpfx Asvva Uueadew

Year of construction: 2013, operating hours: 1,000 h, condition: ready for operation (used), Additional Equipment 2x electrical melt pressure transducer 1/2 “UNF diaphragm pressure transducer 2x ground temperature sensor with sword probe This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information. Application Types Extrusion Kdjdpfx Aewgf Efoadjw

Year of construction: 2016, condition: like new (used), High throughput twin lane tray sealer. Has been packing layered salads in round bowls. Cost in excess of £300k when new in 2016. Kdsdpfsilfkgex Aadew

Year of construction: 2011, condition: good (used), Heated surfacefinishing machine Kjdpofndpnsfx Aadedw for Zink-magnesium coating Tank capacity : 150 l Heating power: 20 kW Weight: 1230 kg

Condition: used, mileage: 1,25,099 km, power: 118 kW (160.44 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,750 mm, overall weight: 7,490 kg, empty load weight: 4,940 kg, maximum load weight: 2,550 kg, first registration: 09/2011, loading space length: 5,200 mm, loading space width: 2,150 mm, loading space height: 2,000 mm, emission class: euro5, color: yellow, driver cabin: other, suspension: other, tire size: 215/75R 17.5, number of seats: 2, Year of construction: 2011, total length: 7,300 mm, construction height: 3,300 mm, fuel: diesel, Equipment: ABS, The Iveco EuroCargo ML 75 E 16 P with LBW and air suspension is a box truck complying with the Euro 5 emissions standard. The vehicle was first registered on September 29, 2011, and has a mileage of 125,099 km. It is powered by a 3,920 cc diesel engine with an output of 118 kW (160 hp) and is equipped with a manual transmission. The yellow vehicle has six gears and can accommodate two people with a payload of up to 7,490 kg. This EuroCargo has a length of 7,300 mm, a width of 2,300 mm, and a height of 3,300 mm, with a wheelbase of 3,750 mm. Kodpfx Ajwangxsadedw The environmental sticker indicates a green level of 4. It has only had one previous owner, which indicates that it has been well maintained. Suitable for commercial use or export, the vehicle offers a variety of loading options and can be delivered within Germany for an additional charge. Viewings are possible Monday to Saturday during the stated opening hours. Sale only to commercial users (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: excellent (used), CTS Temperature test chamber T-55/1000 Li water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type T -55/1000/Li 1) T means: temperature 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Ksdpevba Raefx Aadjdw Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, Year of construction: 2025, power: 80 kW (108.77 HP), motor manufacturer: Yunnei - DEF47CZAA5, General information Field of application: Construction Weights Empty weight: 2.500 kg Functional Generator capacity: 80 kVA CE mark: yes Other information Generator: Stamford Frequency: 50 Voltage: 400 Kodpfsuidypsx Aadedw Drill equipment: Tank, Battery, Control Panel Water tank volume: 150 l Transport dimensions (LxWxH): 3x1,15x2 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: new, Year of construction: 2020, overall weight: 194 kg, input voltage: 3,19,456 V, input current: 7,168 A, input frequency: 5,074 Hz, power: 30 kW (40.79 HP), torque: 600 Nm, rotational speed (max.): 5,300 rpm, rotational speed (min.): 1,50,02,200 rpm, New Siemens Simotics M compact asynchronous motor 150, ID number 1PH8163-2HF10-2FB2, available for immediate delivery, was stored in the warehouse as a spare part for a Demag system Kodpfev Azxusx Aadsdw

Year of construction: 2000, condition: good (used), Vitronics Soltec reflow oven, type: 6638 Quantis Pro Kdodpfx Aaoq I Shajdsw

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 80 mm -Piston rod: Ø 35 mm Kedpfsd Evuwox Aadodw -Stroke: 130 mm -Number: 1x available -Price: per piece -Dimensions: 470/170/H95 mm -Weight: 11.3 kg