Other

Other 40 Fuß HC DV Seecontainer / Lagercontainer

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Nksdjh A Sfdjpfx Ag Nju Technical data was taken from publicly available sources

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm Nedpfowu Tu Dox Ag Neku 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: good (used), functionality: fully functional, We offer for sale a complete line for multi-point automatic welding of SCHLATTER brand steel wires. We have three fully operational production lines. There are also automatic machines for the production of transverse wires (so called slitting machines with a cutter). We also have a number of single point welding machines for steel wires. Nsdpfx Aetvpileg Neku

Condition: excellent (used), Line for door jambs (frames), with END-CUTTING, ROUTERING for COUNTER-PLATE and HINGE INSERTION (Anuba). Composed of: X10030A) Loading Conveyor X10030B) Transfer Conveyor Nkjdpeqwyclefx Ag Nou X10030C) Double-end cutting and drilling machine "AMS" - Left-side Cutting 45° - Drilling - Cutting 90° - Right-side Cutting 45° - Drilling X10030D) Angular Conveyor (90°) X10030E) Anuba Inserting Machine "MASTERWOOD" Mod. MULTITEC X10030F) Strike Plate Routering Machine "MASTERWOOD" Mod. Teknomat 3000

Condition: used, Year of construction: 2007, container length: 40 ft, color: light grey, overall weight: 30,480 kg, empty load weight: 3,745 kg, loading space volume: 67.7 m³, loading space width: 2,352 mm, loading space length: 12,032 mm, loading space height: 2,390 mm, Dear Sir or Madam Thank you for your interest in containers from MT CONTAINER GmbH in Hamburg. Sea containers are wind and watertight large-capacity containers for the transportation of goods by sea, land or air freight. The ISO-standardized containers can be loaded, unloaded and stacked particularly quickly and easily. High Cube containers are the same size as a standard container. They are just as wide as they are long, but they are constructed higher. This gives them a higher volume for more payload. In contrast to standard containers with a height of 2591 mm, high cube containers have a height of 2896 mm. _____ This container is a: 40 foot HC container _____ Our containers have the following features: ✅ tested ✅ Valid CSC sticker (TÜV for the box) ✅ Painted in light grey (desired color possible) ✅ Wind and waterproof ✅ Odorless _____ Our containers have the following dimensions: External dimensions ■ L 12192 mm x W 2438 mm x H 2896 mm Internal dimensions ■ L 12032 mm x W 2352 mm x H 2698 mm Door dimensions ■ L 2340 mm x W 2585 mm Volume ■ 76.4 m³ Euro pallets ■ 25 Further information: Nkjdpoh Hm U Hefx Ag Nsu Unladen weight ■ 3880 kg Payload ■ 28620 kg Total weight ■ 32500 kg Transport goods: Dry cargo transport _____ ⭐ Extra service ■ Expert advice free of charge ■ Transport and delivery with or without unloading the container can be organized for an additional charge ■ Steel frame, stainless steel walls & aluminum floor ■ Can be painted in desired color / RAL tone ■ Lighting installation and electronic equipment possible ■ Drive-on ramp on request ■ Container supports possible ■ Accessible with pallet truck and forklift _____ ■ Prices are net without VAT. ■ Sales stocks change daily, please ask for a quote ■ The photos shown serve as sample images _____ Do you have any questions or concerns regarding containers or would you like a non-binding offer? Then give us a call or send us your inquiry. We also look forward to your visit to our beautiful container depot in the Port of Hamburg. _____ *Important note: The imprint, the information and the link to the platform of the EU Commission for online dispute resolution, the general terms and conditions with customer information and data protection information as well as the revocation instructions and the sample revocation form can be accessed by clicking on "Legal information". This advertisement serves exclusively as a basis for subsequent contract negotiations. It constitutes neither a binding offer nor an invitation to submit such an offer. If the product has aroused your interest, please send us a non-binding message by [email], [telephone], [fax], [letter] to the contact details given under "Legal information" or [via the "Send message" function], stating your [email address], [fax number] or [postal address]. We will then submit a binding offer to you and send you our General Terms and Conditions with customer information as well as a copy of the contract.

Condition: good (used), WEBER tube extrusion line including: Nkjdpfjvryhyjx Ag Nou WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Drilling front heads on each side included Very good condition. Nksdpsd N Rb Dsfx Ag Nou Available immediately.

Condition: new, functionality: fully functional, Year of construction: 2024, container length: 20 ft, color: grey-black, overall weight: 2,150 kg, About this container: External dimensions: 6,058 x 2,438 x 2,591 mm Internal dimensions: 5,898 x 2,352 x 2,390 mm -New/One Way -Immediately available -The price is ex-depot Frankfurt (also available in other regions upon request) -We are happy to take care of delivery and crane unloading (costs upon request) Contact us: ☎️ Call now Looking for a sea container/storage container/office container❓... found❗ ► New & used ► 10ft | 20ft | 40ft ► Many models | Side door | HC | Conversion, etc. ⏳ Nationwide delivery within a few days Nkodpewa Snasfx Ag Neu Why a sea container? ✅ Durability ☰ Shipping containers are built to withstand extreme weather conditions during shipping for decades. ✅ Security ☰ Four steel walls protect your valuables. A level of security no garage can offer. ✅ Flexibility ☰ By buying or selling, you can expand or reduce your storage space at any time. ►Why us? ⚡️ Fast Delivery within a few days. ☺︎ Honesty With us, you get what you buy. ☎️Consulting Benefit from our expertise in the following areas: -Storage containers -Container conversion -Self-storage / Container yards ✊All from a single source Consulting → Sales → Delivery → Crane unloading → Customer support ⚙️Quality Our used shipping containers are also fully functional, as well as windproof and waterproof. What are you waiting for? Give us a call with no obligation! The price is net (plus 19% VAT).

Condition: excellent (used), Year of construction: 2003, working width: 215 mm, welding power (max.): 750 kVA, Complete Mesh welding/Lattice girder factory Factory consists : Nkodpfx Asqy Ek Asg Nou - Mesh welding line SCHLATTER PG 24 , Semi- automatic , Year - 2002 - Lattice Girder Line SMEI , Full automatic , Year - 2003 - Straightening and cutting machines 1x Wafios R4 2 x VITARI NR16 1X VITARI NR10 - Cold drawing line SMEI , Input wire max.10mm, Speed - 4m/sec. - But welding achine SMEI - Wire sharpener SMEI

Condition: like new (used), functionality: fully functional, Year of construction: 2021, Essentially consisting of: Feed hopper (20 and 95 cbm), SANDVIK H-2000 cone crusher, double-deck screening plant, various conveyor and stockpile belts, power generator (300 kVA), electrical installation with control cabinet installed in container, storage silo, dust atomization system Nkodpfx Asq Tcmveg Neu