Spot welder

Schlatter

Condition: excellent (used), Year of construction: 2003, working width: 215 mm, welding power (max.): 750 kVA, Complete Mesh welding/Lattice girder factory Factory consists : - Mesh welding line SCHLATTER PG 24 , Semi- automatic , Year - 2002 - Lattice Girder Line SMEI , Full automatic , Year - 2003 - Straightening and cutting machines 1x Wafios R4 2 x VITARI NR16 1X VITARI NR10 - Cold drawing line SMEI , Input wire max.10mm, Speed - 4m/sec. - But welding achine SMEI - Wire sharpener SMEI Kdsdpeqy Ek Asfx Aayjk

Year of construction: 1993, condition: good (used), functionality: fully functional, machine/vehicle number: RH 241-1-50-30v, used REIFENHÄUSER single-screw extruder with screw size : diameter 50 mm x 33v grooved feed zone and degassing zone type RH 241-1-50-30v with DC-drive 30,2 kW year 1993 with installed switch cabinet Fully functional You are welcome to view this (and other) extruders Ksdopy Eygopfx Aayodk at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 4512 31727.01, Machine for spot-welding wire onto tube. Kdjdpfxoytykhs Aayek

Condition: good (used), Year of construction: 1976, Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Stationary -Operation via hand switch -Arm length of welding machine: 350 mm -Welding pliers type: -Steering Kedpfx Ajc N Uabeayodk -Machine dimensions: 1500/1000/H1670 mm -Machine weight: 774 kg -Dimensions of control cabinet: 1550/420/H1960 mm -Weight of control cabinet: 330 kg

Condition: excellent (used), Year of construction: 2013, loading capacity: max. 1.500 Kg. wire diameter range: 0,5 - 8,0 mm coil outside diam. max. 1.000 mm coil inside diam. min. 300 Kg. Kedpfxsvam Iie Aayedk speed: 0 - 80 U/min

Condition: like new (used), Year of construction: 2021, functionality: fully functional, working width: 1,700 mm, welding power (max.): 600 kVA, wire diameter (max.): 6 mm, type of input current: three-phase, MG950 Mesh Width (Cross Wire Length) for lower feed, single-row: 200 – 900 mm for upper feed, single-row: 200 – 1700 mm for upper feed, double-row (usable width): max. 1530 mm Mesh Length: max. 3200 mm min. 350* mm Distance between the outermost longitudinal wires: max. 1600 mm Longitudinal wire pitch: min. 20 mm Cross wire pitch: min. 10 mm steplessly programmable Clear opening longitudinal wire: min. 15 mm Clear opening cross wire: min. 8 mm Kodpfxjym An Aj Aayedk Longitudinal wire diameter: 2.0 – 6.0 mm Cross wire diameter: for lower feed: 1.5 – 4.0 mm for upper feed: 2.0 – 6.0 mm Longitudinal wire overhang: max. 300 mm, min. 10 mm Cross wire overhang: max. 300 mm, min. 5 mm Number of individual welding groups ESG: 12 Number of portal welding groups PSG18: 12 Max. number of longitudinal wires: 12

Condition: used, Year of construction: 2016, functionality: fully functional, working width: 2,000 mm, wire diameter (max.): 6 mm, type of input current: three-phase, operating speed: 142 mm/s, mesh size: 9,999 mm, continuous power (apparent): 833 kVA, We offer a used Schlatter MG600/MG24.4/10Sp-AC mesh welding machine, model year 2016. Type: MG600/MG24.4/10Sp-AC Serial number: 4885.31609 Year of manufacture: 2016 Rated primary voltage U1N: 400 V Rated secondary voltage Ua: 230 V Primary phases: 3 ~ Secondary phases: 1 ~ Kedpfx Aoyaqzqjaysdk Frequency: 50 Hz Rated apparent power Sp: 833 kVA Rated primary current I1,p: 1202 A Primary short-circuit current I1cp: 50 kA Secondary short-circuit current I’acp: 10 kA If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1996, pressure 80.0 t chamfer lenght 2550 mm distance between columns 2130 mm column arm 420 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec stroke 200 mm dayligth 470 mm table width 60.0 mm table height 910 mm Number of working hours ca. 37.102 h total power requirement 9.0 KW weight of the machine ca. 5750 kg range L-W-H 3100 x 2180 x 2540 mm good / well-maintained condition (!!) - Inspected condition - Machine video - ?v=fwdjSiQYq_A Kdedpfx Aaexabnyoyjk Equipment: - CNC electro-hydraulic press brake - OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2 - CNC-controlled backgauge adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R-axes) - CNC-controlled left-right adjustment of the stop fingers (Z-axes) - Freely movable two-hand control & foot switch - Tool crowning - AMADA type - Various tools - CE marking - Side guards (hinged doors) - Rear guards (hinged door) - 2x emergency stop buttons at the front - Operating instructions

Condition: used, Year of construction: 1990, functionality: fully functional, input voltage: 380 V, overall weight: 1,100 kg, warranty duration: 2 months, welding power (max.): 149 kVA, total width: 750 mm, open-circuit voltage: 7 V, air pressure: 5.5 bar, working range: 220 mm, Equipment: documentation/manual, type plate available, We are offering this used Schlatter P 3.372.53.32 spot welding machine, year of manufacture 1990. Input voltage U1: 380 V Short-circuit power Sc: 160 kVA Reactance X: 50% Mains frequency f1: 50 Hz No-load voltage U20: 7.1 V Secondary voltage U2: 5.0 V Welding current I2c: 22.6 kA Welding current I2cc: 28 kA Primary current I1: 300 A Secondary current I2: 640 A Maximum apparent power Smax: 149 kVA Coolant flow rate p: 14 - 22 l/min Distance e: 220 mm Dimension A: 480 mm Dimension B: 750 mm Maximum force Fmax: 30.0 kN Operating pressure p: 5.5 bar Coolant pressure Pa: 3 - 4 bar Must be collected with an appropriate vehicle. If you have any questions or require further information, please feel free to send us a message or give us a call. Kjdpfxjyhgvts Aayjdk

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Kedpfjwu Tu Dex Aayedk Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: D08L/8034, Offer Number: D08L/8034 Machinetype: straightening and cutting machine Make: WAFIOS Type: R31 Constr. year: 2000 wire diameter range: 1,5-7,0mm Kdodpfxjwi Th Tj Aayek cutting length: 3000 mm speed - meters/min: 5-120 Location: In our warehouse

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working range: 1,000 mm, For sale is a completely refurbished Schlatter radiator welding line consisting of: - Back-up ring unit (EBV) Kedpov Edlvefx Aayodk - 2-row multi-spot welding machine (hydraulic) - 2-row convector welding machine (pneumatic) - Longitudinal seam welding machine (NFR) - Cross-seam welding machine (NQD) - Cutting shear (TS10) - Corner cutting machine (ESV) - Transverse edge closing device (QRSV) - Transport & turning device (TVW) - Nipple & spacer welding system (NIAH) - Test basin (water) Control system: Siemens S7 TIA Please note that the radiator welding line is only available in a fully refurbished condition.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, warranty duration: 6 months, type of cooling: water, overall weight: 4,000 kg, working width: 1,000 mm, Schlatter NQD - Cross seam welding machine - Overhauled We offer here a completely overhauled Schlatter NQD cross seam welding machine. The delivery time of the machine is approx. 4 months. Welding heads: 4 pieces Travel distance: 950mm Kdodpfxju Tqhho Aayek Welding speed: up to 12 meters / minute The machine is only for sale as reconditioned / as good as new. With kind regards T. Becker

Condition: excellent (used), Year of construction: 2018, laser wavelength: 1,030 nm, power: 5 kW (6.80 HP), Manufacturer: Trumpf Model: TruDisk 5001(6C) Year of manufacture: 2018 Laser power: 5 kW Wavelength: 1030 nm Beam quality: < 100 µm Central sensor interface: yes OEM laser: yes Kdodsr Izwmopfx Aayjk Output power 1: 100% Output power 2: 100% Output power 4: 100% Beam quality output 1: ≥ 4mm x mrad, ≥ 100µm NA01 Beam quality output 2: ≥ 4mm x mrad, ≥ 100µm NA01 Beam quality output 4: ≥ 4mm x mrad, ≥ 100µm NA01 Active laser power control: yes Live power display: yes Panel computer: yes Processing optics cooling: yes Water connection set: yes Ethernet in user area: multiple Number of occupied fiber links (LLK): 4 Number of intelligent optics: 4 Number of active couplings: 4 Number of couplings: 4 LLK coding (ILN): yes LLK type: LLK-D TLS number: 20-10-03-A105 Additional interfaces: no Parallel interface: yes Interface output 1: Profinet Interface output 2: Profinet Interface output 3: Profinet OPC UA interface: yes VisionLine preparation: yes Number of VisionLine Basic: 2 Number of VisionLine Detect: 0 Number of VisionLine Interface: 1 Number of VisionLine Project: 0 I-PFO preparation: no PFO Smart Teach App: no TLS machine: no TruControl Module Cutassist: no CE/UKCA declaration: Installation declaration with annex

Condition: refurbished (used), functionality: fully functional, working width: 1,200 mm, Schlatter MG900, 1,200mm wide, with 4 x 100kVA transformers, updated control with Siemens S7-300 PLC from 2016. Mechanically completely rebuilt and all new control cables. Kdsdpfxsvvf T Ae Aaysk