Clamshell bucket

Palfinger

Condition: used, Year of construction: 2008, operating hours: 1,900 h, load capacity: 2,500 kg, fuel type: diesel, gearing type: automatic,

Condition: new, axle configuration: > 3 axles, first registration: 03/2023, loading space length: 16,160 mm, loading space width: 2,550 mm, loading space height: 3,770 mm, total length: 16,160 mm, total width: 2,550 mm, total height: 3,750 mm, suspension: air, tire size: 245 / 70 R17.5, wheelbase: 1,410 mm, color: red, Year of construction: 2022, Equipment: tail-lift, Color: Red Loading capacity: 55,200 kg Loading floor height: 89 cm Extendable Manufacturer: Goldhofer Model: STN-L 4 (245) A RM2 - Stepstar VIN: WG0STNL49N0042599 Year: 2022 – New/Unused Weights: King pin load: 18,500 kg Axle load: 12,000 kg Total axle load: 48,000 kg Gross vehicle weight (GVW): 66,500 kg Unladen weight: 11,300 kg Payload: 55,200 kg Dimensions: Length: 13,020 mm Extension: 3,140 mm Max length extended: 16,160 mm Loading floor width: 2,550 mm / 3,000 mm Loading floor height: 855 mm / 895 mm (+100 mm / -100 mm adjustment) Height: 3,755 mm King pin height: 1,300 mm Axles: Axle make: BPW Eco Plus Air suspension 1st axle liftable Axles 1 & 2: rigid Axles 3 & 4: friction-steered High/Low valve ABS Tyres: 245/70 R17.5 dual mounted Nedpfxjuu Hgdo Aa Dowb Load index: 143/141J (146/146F) Additional features: - Radio remote-controlled loading ramps - Hydraulically operated loading ramps - Manual rear supports - Side extensions - Underrun protection - Wheel recesses - Wheel recess covers - 2.0'' king pin - Lashing rings - Stake pockets - Central lubrication - Oversize load marker boards - BPW landing gear - Toolboxes on the gooseneck = Further Information = Axle configuration Tyre size: 245/70 R17.5 Axle make: BPW Eco Plus Suspension: Air suspension Front axle 1: Twin tires; lift axle; Max. axle load: 12,000 kg; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Front axle 2: Twin tires; Max. axle load: 12,000 kg; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Rear axle 1: Twin tires; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Rear axle 2: Twin tires; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Weights Unladen weight: 11,300 kg Payload: 55,200 kg GVW: 66,500 kg Functional Tail lift: Goldhofer Extendable chassis: Yes Condition General condition: very good Technical condition: very good Optical condition: very good Damages: none Financial information Price: On request For further information, please contact Stefan Schaapveld.

Condition: used, Year of construction: 2011, machine/vehicle number: 26260117, fuel type: diesel, Empty weight: 3.400 kg Njdstr Ny Dopfx Aa Dswb Lifting capacity: 200 kg Working height: 2.600 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: - Max. horizontal reach: 1350 m Transport dimensions (LxWxH): 6.68x2.1x2.95 Please contact PFEIFER GROUP for more information

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 7,700 h, mileage: 42,000 km, load capacity: 230 kg, lifting height: 23,200 mm, fuel type: diesel, TRUCK MOUNTED PLATFORMS PALFINGER P240A Year 2017 Nedpfx Asx Ifpgja Dewb Working height 23,2 meters Horizontal outreach 10,7 meters Basket capacity 230 kg Hours 7700 Km 42000 Excellent conditions Complete of all documents

Condition: new, with planing spindle Type R-R-RP1300 Working width 1300 mm Njdpjd H Sc Esfx Aa Dswb Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg

Year of construction: 2008, condition: used, Field of application: Freight transport Attachment suited for: Loading and unloading machines Please contact ATS Norway for more information Nwsdpfxew Ia Nge Aa Dsb Please provide reference number upon request: 20081 Specifications: 2008 model Weight: 750 kg Hydraulic pump Length: 12 meters Ready for delivery Description:2008 Palfinger PK 14080 C crane with hydraulic pump.The crane was overhauled when the owner purchased it.Ready for delivery. Own weight: 750 Model: PK 14080 C kran m/ hydraulikk pumpe

Condition: used, Year of construction: 1999, Please contact ATS Norway for more information Please provide reference number upon request: 21130 Specifications: Year of manufacture: 1999 Capacity: 13 t/m Crane diagram Grab included New control console Nwsdpfsw Rah Ijx Aa Dob Very little use Description: Palfinger 13 t/m crane from 1999.Comes with grab. Equipped with a new control console and has seen very little use.Has been in storage for several years, so some refurbishment should be expected.Ready for delivery. Own weight: 111 Model: PK 13000

Year of construction: 1979, condition: ready for operation (used), A Gebr. Pfeiffer ball mill is available. Drive power: 330kW, diameter: 2400mm, length: 5000mm, number of motors: 2, motor weight: 180kg, flywheel width: 3.2mm. On-site inspection is possible. Nsdpfev Dwirex Aa Dswb

Condition: good (used), Year of construction: 2011, lifting height: 26,000 mm, fuel type: diesel, Weights Empty weight: 7.490 kg Functional Lifting capacity: 300 kg Working height: 2.800 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Transport dimensions (LxWxH): 7,3x2,53x3,3 Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer: Palfinger Model: TKA 28 KS Year of build: 2011 Condition: Used Data: Max. working height: 28,00 m Max. platform height: 26,00 m Max. reach: 20,00 m bei 120 kg, 18,30 m bei 200 kg, 16,60 m bei 300 kg, Total dimensions LxWxH: 7,30 x 2,53 x 3,30 m Nsdpjx Sx N Ujfx Aa Dswb Platform dimensions LxW: 1,62 x 0,82 m Max. basket load: 300 kg Own weight: 7.490 kg Special features: Rotating work basket, basket arm Information: TÜV und UVV new Location: 41468 Neuss immediately available

Condition: used, Year of construction: 2012, operating hours: 463 h, lifting height: 3,100 mm, fuel type: diesel, total height: 2,750 mm, total length: 2,000 mm, total width: 2,330 mm, color: black, Empty weight: 2.080 kg Top speed: 6 km/h Nsdex U Sptepfx Aa Dswb Technical inspection expiration date: 2026

Condition: excellent (used), functionality: fully functional, Sawmill for sale in Belgium Location: Belgium Application: Suitable for processing hard and soft wood Condition: Technically in excellent condition Included in the price: All machinery, auxiliary equipment, spare parts, and saw blades 🔧 Main lines of the plant 1. External loading and first cut • 25 m chain infeed conveyor for logs • Holtec ES 120 cross-cut saw (Year of manufacture: 1995) Njdpfxowh U Dmj Aa Djwb  - Max. cutting diameter: 1200 × 600 mm  - Saw chain type: Chain saw  - Motor power: approx. 11–15 kW • Cassel Metal Shark Octa metal detector  - Eight-sided opening, DSP technology, suitable for bulk material • 5 m long discharge roller conveyor 2. Internal wood processing • E. Gillette Europe automatic log infeed  - Length: 3.6 m / Diameter: 400–1200 mm  - Capacity: 30–60 logs/hour  - Driven by electric and hydraulic units • Brenta PN 1600 band saw (2014)  - Roller diameter: 1600 mm  - Capacity: Logs up to 1200 mm in diameter  - Belt width: 100–160 mm  - Automatic infeed/outfeed with conveyor belt • Elmed ARGUS 3 metal detector  - Tunnel design with divisible opening  - Suitable for three-shift operation • MEM Cobra 60/650 prismatic edge milling machine (2000)  - 2 active saw shafts, 2 × 55 kW motors  - Max. cutting height: 120 mm / Width: 600 mm  - Automatic infeed and roller discharge 3. Shredding and removal • Vecoplan VTH 65/25/5/U Industrial Shredder (2017)  - Inlet: 650 × 250 mm / Power: 55 kW  - Capacity: 1–5 tons/hour • Vecoplan VR 65/24 Vibrating Table  - Surface: 650 × 2500 mm  - For even feeding to the shredder • Vecoplan KKF 500-1K-U Scraper Conveyor  - Conveyor width: 500 mm  - Suitable for wood chips, sawdust, and pellets 4. Automatic Cutting and Sorting • Kallfass RA4000R Automatic Cutting System (1995)  - Max. cutting diameter: 150 × 300 mm  - Length up to 4000 mm • MEM IMRPC Multi-Blade Saw (1991)  - Up to 14 saw blades / max. cutting height 160 mm  - Automatic feed, robust industrial design • Kallfass stacking system (1999)  - Automatic stacking with spacers  - Max. log length: 2.5 m 5. Additional machines • Flexiever Mini Screener (2020)  - Capacity: 5–10 m³/hour  - For compost, sand, wood chips • VOLLMER CHC 20 H circular saw grinder  - Saw blade diameter: 80–700 mm  - Grinding angle: -20° to +30° • Bammesberger FBA2 surface grinder  - Grinding length: 400 mm / Width: 140 mm • Ingersoll Rand ML30 screw compressor  - Power: 30 kW  - Air flow: 4.55 m³/min (7.5 bar)  - Operating hours: 43,198 h 6. Extraction system • APW fan – 18.5 kW, built in 1998 (2 fans) • Lysair fans – built in 1995 and 2020 • 2 cyclones with rotary valves • Purpose: Efficient extraction of dust, chips, and fine dust 🔍 The sawmill can be viewed in Belgium by appointment. All equipment is ready for operation and ready for immediate use. Ideal for industrial wood processing or as a complete investment. _____

Condition: used, functionality: fully functional, machine/vehicle number: 2490178, fuel type: diesel, color: red, Year of construction: 2012, Equipment: UVV, Technical data: * Working height 25.8 m Nsdpoqya Sijfx Aa Djwb * Loading platform length 1.4 m * Loading platform width 0.7 m * Reach 13.5 m * Passengers 2 * Payload 200 kg * Wheelbase truck 2.9 m

Condition: used, mileage: 1 km, first registration: 06/2016, FASSI F 235 A.2.23 crane + radio remote control * with outriggers * radio remote control Nwedpfxsx T D R He Aa Djb * charger * hydraulic pump Location: Flieden!

Year of construction: 2011, condition: excellent (used), This is a complete plant for house construction. Prices are listed with each item. Consisting of the following individual elements (see attached document as well): Photos will follow, they are already included in the attached document. Table 1 (Positioning and clamping of the frame structure) €34,500 - Elevating longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity Table 2 (Applying the first sheathing and fastening) €25,300 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Table 3 (Applying the second sheathing, fastening and turning the element onto the next table) €35,650 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Electrical installation and insulation) €34,500 - Cross conveyor with rollers and sheathing - Table traverse drive - Connections for compressed air and electricity Nwodpfxju D Amgs Aa Deb - Hydraulic turning device Table 5 (Applying the first sheathing and fastening the second side) €32,775 - Longitudinal conveyor with 3 hinge conveyors - Cross conveyor with rollers - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Table 6 (Applying the second sheathing and fastening) €28,750 - Longitudinal conveyor with 3 hinge conveyors - Pneumatic cross clamping - Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 - Longitudinal conveyor with 3 hinge conveyors - Hydraulic tilting unit - Table traverse mechanism - Upper guide for holding the walls vertically Manual surface gantry with vacuum lifter on Table 2 €13,800 (Applying the first layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 3 €13,800 (Applying the second layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 5 €13,800 (Applying the first layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 6 €13,800 (Applying the second layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Wall storage 1: 12 m long x 24 tracks €11,500 Wall storage 2: 12 m long x 20 tracks Vacuum lifter with column slewing crane €9,200 1 cross beam 2 t Abus €20,125 1 cross beam 2 t

Condition: used, mileage: 1,200 km, first registration: 07/2006, fuel type: diesel, gearing type: mechanical, suspension: other, number of seats: 2, Equipment: crane, hydraulics, - Offer applies only to the crane - the tractor unit is not available. Palfinger PK12000: 6460kg at 1.8m / 2440kg at 4.3m / 1150kg at 8.1m / 880kg at 10.2m / 720kg at 12m and more. For further information regarding the offered vehicle, please request a detailed quotation. Ask about our attractive hire purchase, leasing, or full-service rental options. Our general terms and conditions apply. Subject to prior sale. Financing offers are subject to positive credit assessment and are available only to GERMAN commercial customers. More information also available at o. Crane, special-purpose vehicle, first owner, German version. Nsdpfxsx Tuz No Aa Djwb