Palfinger PK 14080 C crane w/ hydraulic pump

Palfinger PK 14080 C crane w/ hydraulic pump

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM3000.10000 H-202.41.10000.4E 160.20, Load capacity 3.2t Fjdpfx Agevx E Ncs Roft Reeving 4/1 Lifting height 10m Lifting speeds 5/0.8m/min Cab travel speeds 20/5m/min FEM group 2M Operating voltage 400V Control voltage 230V Flange width 300mm Available immediately in stock

Year of construction: 2011, condition: reconditioned (used), Boschert tool grinding machine EASY SHARP Equipped for Trumpf tooling system (Amada system optional) Machine for punching tool maintenance with cooling system and especially powerful motor, therefore also suitable for use with diamond grinding wheels. Used machine is currently being overhauled Equipment for Trumpf tooling system up to size III Accessories: Tool holder for punch flat and whisper Die holders for size I, II and III New corundum grinding wheel Dressing diamond Cooling system and machine base revised Technical data: Grinding wheel diameter 175 mm height adjustment 150 mm working area 400 x 150 mm motor power 2,2 kW Motor speed 2825 rpm Optional adapter for Amada system available Fjdpfx Ageid I T Ie Roft Pictures similar

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Fsdpfx Agowq Dpqe Rsft Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts up, but the control unit does not respond to commands. The previous owner replaced the original AMADA control with a DELEM unit.

Year of construction: 2003, condition: good (used), Weishaupt gas burner Monarch Burner type G7/1-D Version ZMD Ffjdpfemdpczjx Ag Ret Power 300 - 1750 KW Including gas line ( gas fitting ) Burner was recently in operation

Condition: used, mileage: 1,001 km, first registration: 01/2006, color: red, driver cabin: other, gearing type: other, Year of construction: 2006, Equipment: central locking, crane, Vehicle location: Bovenden, emergency stop, foldable, 2-point hydraulic outriggers, radio remote control, four hydraulic extensions Load diagram: 4.6m-4195kg, 6m-3091kg, 7.90m-2254kg, 10.10m-1720kg, 12.20m-1398kg! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ffedpfsi Rp T Iox Ag Rjt - .

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Ffodpsvwlqqjfx Ag Rst Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, machine/vehicle number: wtcs750s, Westtech Woodcracker CS750 Smart - available immediately Equipment: - Tiltator can be rotated continuously - Cutting diameter: 750 mm - Grab opening width: 1,280 mm Fsdpjiady Eofx Ag Roft - Own weight (basic - fully equipped): 820 - 980 kg - Recommended liter output: 65 - 110 l/min - Recommended operating pressure: 230 -280 bar - Service weight of carrier vehicle: 15 - 30 t - Saw box: actively suspended - Chain lubrication of saw: grease - Optional: Power tiltator can be rotated continuously Available in multiples / fits perfectly with Magni RTH 6.30 SH & Magni RTH 6.35 SH. Can also be offered in conjunction with a Magni. Also fits Merlo. We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you!

Condition: new, Year of construction: 2024, == Exhibition machine == ALZMETALL column drilling machine ALZSTAR 40 SV with coolant unit B (option 25) (consisting of separate tank (33l), pump with motor protection switch, complete fitting) and LED machine light Standard equipment: Mushroom pushbutton, reversing switch (for clockwise and anticlockwise rotation), motor protection switch Infinitely variable speed adjustment, digital speed display, feed overload protection, protection class IP54, connection plug Spindle protection with electrical fuse Technical data: Drilling capacity steel E335 (St 60) 40 mm Thread cutting: Steel E335 (St 60) M 24 Cast iron EN-GJL-200 (GG20) M 30 Short spindle MK 3 Spindle stroke 120 mm Projection 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Spindle-to-table distance min./max. 117/701 mm Feed rate 0.10 + 0.20 mm/rev Machine height without options approx. 1840 mm Fjded Hy Elspfx Ag Rjft Net weight approx. 285 kg Drive stepless Motor 1500 / 3000 rpm Power 1.45 / 1.9 kW Spindle speed 160-2250 rpm

Condition: new, total length: 5,130 mm, Year of construction: 2025, load capacity: 50,000 kg, Crane JMG MC 50000RE Drive Electric Year built 2025 Fjdpfx Agoxd E H Ij Reft Lifting weight (kg) 50,000

Condition: good (used), mileage: 8,89,496 km, power: 412 kW (560.16 HP), first registration: 07/2012, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, Year of construction: 2012, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, second fuel tank, spoiler, trailer coupling, = Additional Options and Equipment = - Aluminium fuel tank - Remote-controlled central locking - High beam - Speed limiter - Intarder - Refrigerator - Air suspension - Air horn - Spare wheel - Sun visor - Stability control - Auxiliary heater (parking heater) - Toolbox - PTO (power take-off) - PTO (power take-off) - Central lubrication system - Towing hitch = Further Information = Axle configuration Suspension: Air suspension Front axle: Steered; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 1: Tyre tread left: 50%; Tyre tread right: 50% Rear axle 2: Lift axle; Steered; Tyre tread left: 50%; Tyre tread right: 50% Weights Unladen weight: 17,372 kg Payload: 8,628 kg Gross vehicle weight: 26,000 kg Functional Crane: HMF 3000 K6 30 tm radio remote, year of manufacture 2012, mounted at rear of chassis CE marking: yes Condition Ffjdpsw Il Ubofx Ag Rot Technical condition: good Optical condition: good Financial information Price: On request Further information Please contact John de Koning or Mark de Koning for more information.