Centerless cylindrical grinding machine

PALMARY PC 12-SPS

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, grinding wheel width: 150 mm, grinding wheel diameter: 305 mm, year of last overhaul: 2025, Grinding wheel diameter 305x150 mm, workpiece diameter 1-40 mm, machine for plunge and through-feed grinding, PLC control, coolant system, hardened and ground guideways, grinding and regulating spindles with hydraulic slide bearings via three-point bearings, hydraulically adjustable dressers for grinding and regulating wheels, regulating wheel drive adjustable via AC motor, new German-made electrical system with Siemens components, Siemens S7 control system Ppsdpfjwi H Uaox Afhol

Condition: used, Technical details: balancing body max.: 800 kg balancing body diameter: 1250 mm Balancing revolution per minute: 190 - 3600 U/min bed length: 2600 mm voltage: 380 V/Hz drive power: 7,5 kw Weight approx.: 1,5 t dimension machine xH: 3,5 x 1,7 x 2,0 m dimensions electric cabinet: B:650 x T:250xH:800 mm Horizontal balancing machine The balancing machine is used to measure and balance the static or dynamic unbalance of rotors. Balancing body weight max. 800 kg with equal load distribution, i.e. 400 kg per bearing pedestal Power transmission by means of cardan shaft Bearing journal Ø min./max.: 16-95 / 95-180 mm Bearing distance center distance min. 125 mm and shaft end bearing center max. 2070 mm Measured speed: 1st gear = 190 - 650 rpm. 2nd gear = 400 - 1250 rpm 3rd gear = 700 - 2100 rpm. 4th gear = 1200 - 3600 rpm. 2 pick-up blocks whose displacement is manual over the entire bed Schenk measuring device with digital display and some accessories, e.g. many rotor shafts with different Ø and different rotor mounts, please ask! Pedpfou Upp Tsx Afhepl *

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Ppjdpfsw T Sd Tjx Afhol Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Year of construction: 2012, condition: good (used), Muratec MW120 GT for sale Used, in excellent condition. The machine can be viewed by appointment. Ppodpjifi D Tjfx Afhjl Delivery is the customer's responsibility, but we can help with packing and loading of need. Delivery: EXW Székesfehérvár

Year of construction: 2001, condition: used, Cazeneuve Maxica 590 With collet Control: SOMAB NUM SP + S 5 Pjdpoh Aylvsfx Afhjpl

Condition: like new (used), Year of construction: 2021, functionality: fully functional, This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW. The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets. Ppedpfx Aexmhdnefhel It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank. For more information about this lathe, please refer to the attached brochure or contact us directly. Equipment includes: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle - Tool presetting device - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 8,000W coolant chiller unit - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction unit, connection flange Ø100 The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated. Further information available on request.

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 20 rpm, table width: 850 mm, table length: 3,700 mm, overall weight: 18,500 kg, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2007 Travel / Stroke Capacities: Longitudinal (X): 3,500 mm Vertical (Y): 1,250 mm Cross (Z): 1,000 mm Table dimensions: Length: 3,700 mm Width: 850 mm T-slots: 5 x 22 H12 Reference slot: 1 x 22 H8 T-slot spacing: 140 mm Paintwork: RAL 5011 (steel blue) RAL 7035 (light grey) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle 24 kW Spindle speed range: Spindle speed: 20-3,000 rpm Torque: 479 Nm Max. feed rate: X, Y, and Z axes 25,000 mm/min Mean acceleration: 2 m/s² Weight: approx. 18,500 kg HEIDENHAIN iTNC 530 HSCI Swiveling control pendant including Heidenhain iTNC 530 control (1 processor / 4 axes) with software options 1 and 2. Automatic Milling Head, Diagonal H4 Automatic indexing Soraluce “Diagonal” milling head, Type H4 / 2 planes with 2.5° x 2.5° indexing, 479 Nm, tool clamping force 18,000 N. Automatic tool changer: Automatic tool changer (random carousel) with 20 magazine positions: The automatic tool change is carried out in the vertical position of the tool spindle. Maximum tool diameter: 125 mm Maximum tool length: 250 mm Maximum tool weight: 15 kg Number of magazine positions: 20 Chip conveyor package: Three chip conveyors, two longitudinal screw conveyors and one cross hinge belt conveyor with integrated coolant tank, discharge height: 1,000 mm Coolant System 2: Coolant/lubricant system 2 with discharge via shower ring and internal Pedpfxexgn Efs Afhspl coolant supply according to DIN 69871 Form AD, tank capacity 500 l + 150 l lift tank with pump, delivery rate 50 l/min, delivery pressure 5/8 bar. Increased delivery pressure of high-pressure pump from 15 bar. RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are sourced by us following a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, all identified visible defects and faults are professionally repaired by our expert service team.

Condition: excellent (used), Year of construction: 2011, operating hours: 5,040 h, functionality: fully functional, turning length: 1,250 mm, turning diameter over cross slide: 420 mm, turning diameter: 420 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 80 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 33 m/min, rapid traverse Z-axis: 33 m/min, bar diameter (max.): 80 mm, MAZAK QUICK TURN 300 Smart Operating Hours: Automatic Operation: 5,040 hours Condition: Very good condition, regularly serviced and meticulously maintained! Capacity & Working Area Max. swing diameter: Ø 720 mm Max. turning diameter: Ø 420 mm Max. bar stock diameter: Ø 80 mm Max. machining length: 1,200 mm Main Spindle Max. spindle speed: 4,000 rpm Spindle nose: JIS A2-8 Rated power (40% duty cycle): 26 kW Max. torque: 750 Nm Turret Number of tool stations: 12 Tool cross-section: 25 mm (external), 50 mm (internal) Feed Axes Rapid traverse (X / Z): 30 / 33 m/min Travel (X / Z): 240 mm / 1,314 mm Tailstock Taper: MK NC axis, pressure controlled via M-codes Max. axial pressure: 10,000 N Dimensions & Weight Machine dimensions (L x W x H): 3,770 x 1,810 x 1,900 mm Weight: 7,100 kg (without chip conveyor and coolant) Chuck: Kitagawa BB210 with through-hole Chip Management Mayfran hinged belt chip conveyor Coolant pump 8 bar & chip flush General Specifications: Pedowzkvfjpfx Afhopl SD MEMORY I/F (1P) + USB MEMORY I/F (1P) Mazak standard colour NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill (650U/1250U) Operator door with safety interlock switch Double foot switch Fully enclosed work area Work area lighting Safety devices according to global standards Complete coolant system Chuck status notification Automatic tool setter (Tool Eye) 10.4" colour display EIA/ISO package LAN interface

Condition: new, Year of construction: 2025, Brand new NC-controlled precision vertical slotting machine for efficient production of keyways. Menu-guided program control for slot depth, slot width, cutting depth, tool width, and number of finishing strokes. Optionally available with a rotary indexing table. Rotary table diameter Ø 320 mm – up to three CNC axes possible. Stroke range of the slotting ram: 0 to 200 mm. Table size: 280 x 500 mm. Clamping table bore: Ø 80 mm. Throat depth: 350 mm. Ppodpsxdi D Dofx Afhol Maximum workpiece height: 400 mm. Continuously variable ram speeds: 30 to 120 mm/min. Dimensions approx. 1.2 x 1.2 m x height 2.3 m. Drive power: 2.2 kW. Weight approx. 2,200 kg.

Condition: excellent (used), FANUC 21i-T Control Center Height 175 mm Distance between centers 1000 mm Grinding head B-axis 1° Ppodpfoyabt Dsx Afhjl Grinding wheel 500 x 63 x 203 mm Grinding wheel speeds -1'500 rpm Internal grinding attachement 60'000 rpm Work piece spindle head C-axis 0.001 ° Measuring probe Automatic balancing attachement Wheel dresser Misc. accessories MARCELS MASCHINEN AG