Pelletpresse

Peletto GKM-200 MAX Futtergranulator

Year of construction: 1976, condition: defective spare-parts repository (used), manufacturer: Ahrens Year of manufacture: 1976 Model: 206 Z Technical data: sheet width: 1000mm sheet thickness: 0,7mm Profiling stations driven: 12 pieces shaft diameter: 55mm drive: 55kW infeed width: 1100mm distance between the stands: 650mm Dimensions of the individual components: roller table 1: 6.000 x 1.700 x 1.700 mm roller table 2: 6.000 x 1.700 x 1.700 mm Drive 1: 3,800 x 1,000 x 1,500 mm Drive 2: 6,300 x 1,000 x 1,500 mm reel: 3,000 x 1,300 x 1,600 mm shear: 1.700 x 650 x 1.000 mm Euro pallet: 1,200 x 800 x 1,200 mm For the whole machine 2 trucks are needed! Accessories/ special equipment: Decoiler Nledjg Ul S Djpfx Abysi Profile shear Remark: The switch cabinet is missing. The machine is therefore not ready for operation.The machine is used as basic setup for roof trapezoidal profiles with high beading.

Year of construction: 2012, condition: good (used), Manufacturer: Gipo AG Type: B 1370 Nljdpfxoilh Efj Abyoi Year of manufacture: 2012 Inlet size: 1.320 x 680mm Included: – Frame – Pre-Screen – Electrical motors for Crusher and Pre-screen Spare jaws in stock!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, pipe diameter (max.): 127 mm, bending angle (max.): 182 °, bending radius (max.): 400 mm, mandrel length: 4,000 mm, overall weight: 16,000 kg, total length: 7,000 mm, total width: 2,200 mm, total height: 1,800 mm, input voltage: 400 V, type of input current: three-phase, feed length Z-axis: 4,000 mm, wall thickness: 5 mm, Equipment: documentation/manual, Capacity, Ø mm / 127 x 5 Radius, min./max. / 50/400 Bending speed/repeatability / 40º/s. ±0,1° Mandrel length 4 000 Weight, kg 16 000 Motor kW / 40 Nlsdpfx Aju Rf E Ejbyoi Length feed 900 mm/sec Degree of tolerance 0.05-0.1°/mm Tools: 63 mm

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° Njdjd E A I Ijpfx Abyoli - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: excellent (used), Year of construction: 2012, section dimension max. 150 x 50 mm pipe Ø 50 – 150 mm wall thickness 1,5 - 5,5 mm reference material (tensile strength) 600 N/mm² coil Ø max. 2.100 mm coil weight max. 10 t finish pipe length max. 9.000 mm round pipe Ø according to list rectangular pipe according to list speed 100 m/min working direction left → right The line consists of: 1. entry part: double carousel decoiler coil opener/pinch roll unit/leveller crop shear strip tail end welding machine strip guide Nedsuc Sw Ajpfx Abysli strip twister/pinch roll unit/strip accumulator entry strip accumulator edge trimming exit twister 2. forming part: No. of horizontal stands: 4 No. of vertical stands: 3 3. welding part (HF) 4. calibrating part 5. separation 6. edge bevelling 7. blowing out 8. bundling 9. hydraulics 10. electrics

Condition: excellent (used), Year of construction: 2001, For sale LVD PPEB 80/25 in very good technical condition. Under power, can be inspected any time Nedperx S Hnjfx Abysli

Condition: used, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-forming sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Nedodzqblepfx Abyeli Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The seam is the doubling over of the sheet metal edge (1x folded over) to increase the stiffness of the sheet. By folding over, a rounded edge is created, reducing the risk of injury from sharp sheet edges. Ideal for metalworking applications such as sheet metal furniture, cladding panels, or for the production of ventilation and silencer components.

Condition: excellent (used), Offered is a used slurry pump / sewage pump. SDAG Wismut-Aue. Details see photos. Nsdpfx Aohwnfcsbyoli

Condition: used, sheet width 250 mm coil outside dia. 1400 mm weight max. in kg 2500 kg plate thickness 2 ... 4 mm straightening feed 2,5 ... 15 m/min coiler: expanding range mm total power requirement 1 + 4 kW weight of the machine ca. 1,8 t Nljdpfx Absfn Aqmjyji dimensions of the machine ca. m decoiler, MHR 250/4: max. coil diameter: 1400 mm coil diameter inside: 450 - 530 mm unbraked decoiler with pressure roller straightening machine, MR 250/4: Belt infeed height: 1250 mm The system was dismantled, checked and repainted.

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Nljdpjpugwijfx Abyoi Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.