Roller tracks / stop systems

POSIFLEX 3000/360/Anschlag

Condition: good (used), Year of construction: 2002, From company liquidation: Podpfx Aot Iklkodbopl Peddinghaus Peddimax 1002 Year of manufacture 2002 Max. Punching and shearing capacity: 1000 kN Punches 31 mm holes in 25 mm steel Shears on the flat steel shear to 500 mm up to a material thickness of 18 mm steel Contact length stop Many accessories (special punches) Special punching device SV 90 up to 90 mm holes Weight: approx. 3,000 kg

Condition: good (used), Year of construction: 1993, turning diameter over bed 400 mm turning diameter over slide rest 210 mm turning length 1060 mm centre height 200 mm spindle bore 58 mm spindle taper: Camlock D 1-6 Drive 3,2/4,9 kW spindle turning speed range 16, von 55 bis 1600 U/min feeds - longitudinal 0,039-0,541 mm/U Ppjdsxtfx Aepfx Adbsl feeds cross 0,019-0,271 mm/min. weight of the machine ca. 1,45 t dimensions of the machine ca. 1900 x 870 x 1700 mm High-quality machine with induction-hardened guideways, torsionally rigid bed, main spindle made of chrome-nickel steel, surface-hardened and ground gears, automatic circulating lubrication in the spindle housing, slip clutch in the support, bed lubrication via hand pump, Siemens electrical system. Thread feeds for metric, inch, module, and diametral pitch. 3-axis digital readout: 2 scales are mounted, the scale on the top slide has been replaced but still needs to be mounted. The display unit is for lathes and therefore, with the appropriate setting, adds the slide travel to the top slide travel. The machine was only used in a prototype workshop for sporadic applications. Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 1988, Ja Psdpferyaqyox Adbepl Stanzkraft 800 kN frequency 50 Hz current 17/11 A voltage 220/380 V round bar steel 32-17 mm square edge steel 30-18 mm 100 x 10 mm flat steel 350 x 16 mm throat 200 mm work height max. 1107 mm total power requirement 4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1200 x 700 x 1850 mm

Condition: good (used), Year of construction: 2008, Scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table, flat form lift table -Manufacturer: Edmolift, scissor lifting table flat-form lifting table type TUB 600 and agg -Load capacity: 600 kg -Platform: approx. 1450 x 900 mm - Dimensions retracted: height 85 mm -Dimension extended: height 800 mm -Lifting time: approx. 13 seconds. -Quantity: 1x lifting table available -Price per piece Pedpfsphup Ajx Adbjpl Transport dimensions: 1480/930/H260 mm -Weight: 212 kg with pallet

Condition: good (used), Year of construction: 2001, machine/vehicle number: 443954701005, Offer 25086 Hydraulic profile and bar steel shears with notching device and hole punch Technical specifications: - Flat steel shears - Flat steel - 400 x 120 mm - or: 300 x 22 mm - Section steel shears - L- and T-bars at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notcher - With square notcher for sheets up to approx. 13 mm - Notching depth approx. 70 mm - Notching width approx. 52 mm - Hole punch - Punching force approx. 100 t - Throat 510 mm - Stroke approx. 10 to 50 mm - Punches in steel up to Ø 31 mm in 25 mm - Electric contact stop - Various 10 punching dies + Dies - Drive 400 V / 5.5 kW Ppedpfev I Sxvsx Adbjl - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Year of construction: 1990, condition: as good as new (ex-display), Eckolt hydraulic press in mind condition Ppedpfx Adsd Siacsbjl executed with plate holder see pdf for technical specs

Condition: good (used), punching force: 45 t, - Capacity 45 tons - Hydraulic Podsu Havwopfx Adbepl - 4 stations - Foot control - Emergency stop - 400V

Condition: used, Technical specifications: Pressure: 50 t Bending length: 2000 mm Equipment: Psdpfxox A Afro Adbopl - Back gauge - Emergency stop button - Foot control

Condition: used, Pressure: ± 28 tons Punching capacity: Ø 20 mm at 10 mm / Ø 30 mm at 6.5 mm Flat bar capacity: 50 × 15 mm Angle iron cutting capacity: 65 × 6 mm Psdpfx Asw N Nadedbjpl Shear width: 175 mm

Condition: new, sheet width 2020 mm plate thickness 2,0 mm daylight opening 122 mit Segmente mm bending angle max. 0 - 135 ° work height max. 930 mm total power requirement von Hand kW weight of the machine ca. 1020 kg dimensions of the machine ca. 2,75 x 0,56 x 1,26 m characteristics - Segmented upper beam for a large number of bending options - Universally applicable bending machine for plumbing and repair shops - High upper beam for producing high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Large opening width for processing large workpieces - Robust construction in a modern design Ppedsxaamhspfx Adbel scope of delivery - Segmented upper cheek - Biegesegm. 25 | 30 | 35 | 40 | 50 | 75 | 100 | 150 | 200 | 300 | 500 | 510 mm