Press container

Presto HAN10

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: M32961, year of last overhaul: 2025, Self-pressing container (Absetzer), year of manufacture: 2015 Unladen weight: 2,500 kg SN: 31047, Colour: Blue Last service: 05/2025, last UVV: 05/2025 It was in active use until January 2026. The press was extensively tested today (27/04) and is ready for immediate use. Iodeyymraepfx Af Tsib The press has a superstructure in which weighing technology was installed. This has been removed. Material is fed into the press via the side door. The enclosure can be removed at any time by loosening the screws. Then the press is in its normal state. Location: DE - 58730 Fröndenberg

Condition: excellent (used), Manufacturer: Strautmann Model: PP 1207 Plus Bale size (LxWxH): 1200 x 1100 x 730 mm Bale weight: approx. 400 - 500 kg External dimensions (LxWxH): 1850 x 1047 x 3079 mm Transport height: 2500 mm Filling opening: 1190 x 600 mm Pressing force: 59 tons / 580 kN Throughput: 1 - 2 bales/hour Number of ties: 4 Press weight: 2300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: covered indoor/outdoor Noise level: less than 80 dB(A) Year of manufacture: 2003-2005 I also have Strautmann PP 1207 balers from 2009-2011, price 5,500 EUR Also available: Strautmann PP 1208 balers from 2014-2015 Iijdpfxev Aiymo Af Tsb Strautmann AutoLoadBaler year 2018, price 7,500 EUR

Condition: reconditioned (used), Year of construction: 2019, Presto HAN10R Press container for skip loaders 10 m³ usable capacity Discharge door hinged at the top Two-piece lid above filling opening, opening left/right Prepared for ramp operation Machines are overhauled, serviced, inspected, and repainted in standard RAL color before sale. Pictures are reference images of machines of the same type we have manufactured. We will be happy to provide a quote including delivery. Iiodpfow Uqngsx Af Teb

Condition: used, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) Isdpetqd Ndsfx Af Tjib ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: good (used), Year of construction: 2002, Beringer BPx4 ergo Useful volume 6cbm tested, serviced, fully functional Can be painted in the desired RAL color. Iodpfx Afjtp Hnwe Tjib Noes3koku We would be happy to make you an offer including delivery.

Condition: new, Klanke Supercut roll splitter for efficient shredding of reject rolls. Features: -Automatic safety lock -Emergency stop rip cord -Siemens SPS Technical data: Blade length: 3000mm Cutting channel opening: 1200mm Motor power: 15kW Cutting force: 50to Order goods Price and further information on request. We will be happy to make you a non-binding offer. Iodpfxsn I Rgpe Af Toib

Condition: new, Year of construction: 2025, machine/vehicle number: 860828850, Gasparin GI1010CV K1 mobile impact crusher on crawler track The K1 impact crusher with tracked undercarriage, the new addition to the product range with impact mill with a capacity of 250 t/h . Can be equipped with re-screening with closed circuit recirculation to perfectly calibrate the final product. It is appreciated for the excellent quality of the crushed product and also gives its best in terms of operating economy. Iisdpfx Ajhd I T Ijf Tjb Production capacity: approx. 250 TO/H Proportional distributor with \"Load Sensing \" for optimization of the system and reduction of fuel consumption by approx. 30%. gap hydraulically adjustable even during the crushing operation fast blocking system with wedges and folding cylinders dust extraction system tank pump magnetic separator warranty 1 year up to max. operating hours from start of operation of the plant Technical data: Impact crusher type M x 700 mm Crushing gap from 30 (20) to 100 mm (gap adjustment to 20mm only possible with 3rd grinding track) Feed hopper 4 m³ - 1800 x 3700 mm single deck vibrating screen 950 x 1500 mm Main conveyor belt 800 x 9600 mm 4 cylinder diesel engine with constant speed 82 HP/60 KW , exhaust gas stage V Control panel chain drive 400 x 2900 mm Weight: kg Transport length 12560 mm Transport width:2550 mm Transport height 3200 mm More information Application: construction, Empty weight: kg, General condition: very good, Technical condition: very good, Visual condition: very good, Transport dimensions (L x W x H): 12.56x2.55x3.2,

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h Iodpfsvf E Avsx Af Toib bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: new, Year of construction: 2025, machine/vehicle number: 472684923, Gasparin jaw crusher GI107CV Vesuvio, mobile jaw crusher on crawler track The GI107 VESUVIO mobile crusher represents versatility and can be designed in two different configurations. Equipped with a Grizzly vibratory feeder (GI107C), it is suitable for more traditional applications. Iisdpfjhd I Rzsx Af Teb Vibratory feeder and pre-screen, on the other hand, the machine (GI107CV) is suitable for arduous applications with high fines content and high material moisture. Equipped as standard with the patented HCS system (Hydraulic Crushing System), VESUVIO is the best answer to the requirements of professionals and rental companies. Production capacity: approx. 320 TO/H Patented HCS system Proportional distributor with \"Load Sensing \" for an optimization of the system and a reduction fuel consumption by approx. 30%. gap hydraulically adjustable even during crushing operation fast blocking system with wedges and folding cylinders unloading height 3000 mm dust extraction system tank pump magnetic separator warranty 1 year to max. operating hours from the start of operation of the equipment Technical data: Jaw crusher 1020 x 700 mm crushing gap from 45 to 180 mm feed hopper 5m³ - 2000 x 3960 mm two-deck vibrating screen 1020 x 1800 mm Main conveyor belt 800 x 9600 mm 4 cylinder constant speed diesel engine 82 HP/60 KW , exhaust gas stage V Control panel chain drive 400 x 3310 mm Weight: kg transport length 12900 mm Transport width:2530 mm Transport height 3200 mm More information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: used, No. 10028 Cable granulation plant FRS BK 60 Used According to our customer, the machine is fully functional and can be inspected and tested on site Cable granulating system for up to approx. 1000 kg of cable per hour (according to our customer) Motor and blades were renewed in 2025 Rotor dimensions 610 x 500 mm 14 blades Motor power 45 kW Incl. magnetic conveyor belt Cylinder size 400 x 120 mm Motor power 1.5 kW Ijdpfx Ajxwdndsf Tjib Incl. sieve with two outlets Motor power 0.35 kW Installation dimensions approx. 7000 x 6000 mm LW Transport dimensions approx. 6000 x 2400 x 2600 mm LWH Weight approx. 6000 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, transport and loading by us optionally possible Errors in the description and price reserved To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location