Stationary Concrete Pump

Putzmeister P13 EMR KA230

Condition: good (used), Machinery from honey processing factory. DC Norris hotrooms, DC Norris settling tanks, DC Norris holding tanks, crystallised tanks, super seed tanks, pump, filter sets, various filling lines to fill squeezy bottles, glass jars and plastic buckets. Njdpjpcibmjfx Akfocr

Condition: reconditioned (used), functionality: fully functional, approx. 4.5 m long infeed and centering table Drive via chain from the feed motor Centers the logs in the middle of the rotor Debarking machine VK 26 4 main cutters 4 pre-cutters Njdsu Hmacepfx Akfocr 30 KW main motor 11 KW feed unit non-driven extraction table Machine workshop checked Machine cleaned and repainted

Year of construction: 2001, condition: ready for operation (used), A paving stone production line Omag, which has been continuously optimized and upgraded to the latest technical standards, is available. Overhauls: 1) Conversion for an additional hydraulic unit for additional load in 2020. 2) Conversion to servo-vibration with Siemens S7 control in 2016. 3) Conversion to digital path measurement of mould and ram in 2017. 4) New core filling carriages in 2017. Plant components: 1) Board destacker and board stacker including roller conveyor. 2) Board feeder (advance) and board conveyor (scraper) to the lifting frame. 3) Board turner. 4) Horizontal and vertical bundling units Ridder & Signode, years of manufacture: 1994 and 1983. 5) Trafo lifting platform including motors and without control, year of manufacture: 1983. 6) Doppler including hydraulic unit, year of manufacture: 2004. 7) Stone packer Omag K1400 including hydraulic unit, year of manufacture: 1997. The line has no base boards. 8) Stone finisher Omag S22 140-90, year of manufacture: 2001. Documentation available. An on-site inspection is possible. Nodsw R Uziepfx Akfocr

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Technical data: Ncjdjt Ucgaopfx Akfor - max. cutting width 3060 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws - Number of hold-down devices 15 pcs - Stroke rate 23 to 43 /min - Front angle stop - Motorized backgauge position-controlled 15 - 850 mm - Cutting line lighting - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Condition: new, Year of construction: 2025, 2-roll driven profile bending machine Hydraulically adjustable top roller Shaft diameter: 40 mm Ncodpehgiuhsfx Akfjr Roller diameter: 152-162 mm Revolutions: 8.5 per min. Top roll adjustment: 120 mm Capacity table: in the attachment Machine available in various versions: Manual adjustment, 3-roll driven etc.

Condition: new, - Shaft diameter 50 mm - The upper roller is hydraulically moved - Three rollers are driven - Digital display - Can be used horizontally/vertically Ncjdpfxsgg N Twe Akfsr - Foot switch - Emergency stop - Documentation - 400 V

Condition: excellent (used), functionality: limited functionality, Year of construction: 2000, For sale: High-quality Liebherr concrete mixing plant in excellent condition – including BIBKO wastewater treatment system A used, excellently maintained concrete mixing plant from the renowned manufacturer Liebherr is for sale. The plant impresses with its low operating hours, complete technical documentation, and original delivery condition – all components come from the manufacturer itself. Important addition Also included in the offer is a wastewater treatment system from BIBKO Umwelttechnik & Beratung GmbH. This allows for environmentally friendly and economical reuse of residual and wash water, which not only reduces operating costs but also meets the ecological requirements of modern production processes. Main technical data Type: Ringtellermischer R 1.0 Practical mixing capacity: 1.0 m³ solid concrete per batch Efficient filling: A 6m³ truck mixer is filled in only 6 batches Theoretical mixing capacity: 50 m³/h Practical mixing capacity: 40 m³/h Aggregate storage Star storage: 1,200 m³ total capacity Active storage: 65 m³ Number of aggregate components: 5 Ncsdpswlwrujfx Akfer Cement silos 2× cement silo at 40 t each with overfill protection 1× two-piece cement silo at 80 t with overfill protection Condition of the plant Commissioning: 2000 Out of operation: since 2006 Operating hours: approx. 3,500 (estimated) Condition: Very good – minimal use, excellently maintained Previous owner: First owner Originality: All components original from Liebherr Documentation: Fully available (electrical diagrams, foundation plans, structural analysis, etc.) The solid and well-thought-out construction of the plant enables easy disassembly and reassembly thanks to the predominantly bolted design. The control cabinets are connected to each other via plug connections – for details, please refer to the attached PDF documents. Additional service upon request: We are happy to support you in realizing your project with experienced partner companies for: Dismantling and reassembly Electrical commissioning (industrial electronics technician) Organization of transport with reliable forwarding agents This way, your new plant can be quickly and professionally put into operation at a new location. Interested? We look forward to your inquiry and are always available to answer any questions you may have!

Year of construction: 1990, condition: ready for operation (used), A complete and automated OMAG paving block production line is available. Components: 1) Drawing plate for Colormix in the hopper. 2) InLine washing system. 3) Drying side Rekers. 4) Handling Rekers. 5) Rekers control system. 6) Rekers fork carriage. 7) Part of the drying chamber racks, as they are load carriers for the building. 8) Board crane as buffer placer and empty boards. 9) Cyklop horizontal strapping. Without strapping and boards. Concrete feed: 2-axis bucket, output with 90x90 paving blocks: 1000-1100/shift, board size: 1000mm/1400mm, max. format size: 1000mm/1400mm. Completely new OMAG control system in 2017. Conversion to proportional valves in 2014. Documentation available. On-site inspection is possible. Nodjv Nn Hxopfx Akfscr

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0618012, Offer 24604 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case Nedpfx Ajvncubekfscr - intermediate package device - wire feed case 1 linear meter - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Year of construction: 1965, condition: used, machine/vehicle number: 4447, working width: 2500 mm metal sheet thickness: 4 mm throat: 70 mm rear stop: 520 mm power: 380 V, 6,3 kW Ncjdpfeb H Ibujx Akfor space needed: 3200 x 2300 x 1270 mm weight: 4600 kg