Radiator Cores

Radson Mixed lot 550 pieces

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, table length: 4,500 mm, table width: 2,500 mm, spindle speed (max.): 22,000 rpm, CNC Heidenhain iTNC 640 WORKING AREA: Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE: Dimensions: mm 4.500 x 2.500 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to Y-axis movement. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE: Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. C-axis rotation range: ± 270° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Constant power range: rpm 3.000 to 18.000 Constant torque range: rpm 10 to 3.000 Tool interface: HSK-A63 DIN 69893 ELECTROSPINDLE HSK-A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM Spindle power (S1/S6): kW 37/43 Spindle torque (S1/S6): Nm 140/165 Maximum spindle speed: rpm 15.000 Constant power range: rpm 2.500 to 12.000 Constant torque range: rpm 10 to 2.500 Tool interface: HSK-A100 DIN 69893 CHAIN TOOL MAGAZINE – 55 POSITIONS, HSK-A100 / HSK-A63 Floor-mounted fixed chain magazine located at the rear of the machine, fully enclosed for operator protection, equipped with a vertical tool change arm and automatic tool pre-selection. Fixed-pocket management system. Djdpoyv In Iofx Af Aeci Hydraulic axis locking Total tools: No. 55 HSK-A63 tools (DIN 69893): Number of tools: No. 30 Max tool diameter: mm 90 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 300 Max tool weight: kg 10 HSK-A100 tools (DIN 69893): Number of tools: No. 25 Max tool diameter: mm 100 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 450 Max tool weight: kg 20 REQUIRED CONNECTIONS Maximum installed power: kVA 177 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • High-pressure water and air through the spindle • Semi-automatic electrospindle change system with HSK-A63 and HSK-A100 interfaces • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity

Condition: good (used), Year of construction: 1975, Forming rolls R30/40/50/60/70/80/90/100 Under power good running order Documentation drawings availebel Max. workpiece: 3000Ø Maximum sheet thickness:12mm Max. dishing radius: R-300mm Min. product Ø: 300 Min. plate thickness: 2mm Min. dishing radius: 20mm Working speed: 0 - 5000mm/min. Power: 30kW Length: 5000mm Width: 1600mm Height: 2800mm Dedpfx Afsxcnabs Asci Weight: 6000kg

Condition: excellent (used), Year of construction: 2013, Maximum saw blade : 400 mm Digital angle display in degrees ( +/- 46 degree ) 2 x pneumatic clamps Hydraulic blade feed Engine size : 1,8 Kw Digital display with touch screen Dcsdpfx Afoxx Hwws Asi Hand held barcode scanner 6000 mm infeed with digital pusher 4000 mm manual outfeed with rollers

Condition: good (used), Year of construction: 2014, functionality: fully functional, turning length: 760 mm, turning diameter: 376 mm, spindle speed (max.): 3,500 rpm, quill diameter: 78 mm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Main spindle power: 22kW Dedpfx Afeykikxo Ajci S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range: 260mm Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight: 6000 kg

Condition: good (used), Year of construction: 1998, Max. Pitch circle diameter External gearing 300 mm Max. Pitch circle diameter internal gearing 300 mm Max. Outer diameter of workpiece (equipment) 450 mm max. module 6 gear hobbing width -max. 100 mm Max. Helix angle (with tool Ø 125 mm) +/- 45 ° strokes - infinitely variable 130 - 1300 Hub/min workpiece weight 1000 kg Minimum distance table top - tool spindle -55 / +300 mm Maximum distance table top - tool spindle 200 mm Maximum distance table top - tool spindle 350 mm Manual Upright side shift +/- 25 mm Manual swivelling angle of the tool spindle +/- 0,5 ° Max. Tool speed 15 UpM Max. Workpiece speed 27 UpM Max. Tool diameter 7 Zoll voltage 400 V frequency 50 Hz Max. Line power 70 A total power requirement 48 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,27 x 3,11 x 2,87 m taper in main spindle SK 45 table hole 40 mm control Siemens Sinumerik 840 C Gleason PFAUTER gear shaping machine Mod. PSA 300 The CNC modular gear shaping machine with skiving cutter for the machining of external and internal cylindrical gears, with straight or helical involute with straight or helical involute toothing, as well as any other profile splitting process. The work cycle is controlled by a CNC unit, with specific software for machining the gears, machining. Field of application --> The PSA 300 has been designed for the production of: - Gears with straight external teeth Dcedpfxsvu E Nuj Af Aoi - Gears with straight internal teeth - Gears with external helical teeth - Gears with internal helical teeth

Condition: new, Year of construction: 2024, TECHNICAL DATA Table size 1100 x 760 mm Table height 870 mm Milling spindle non-replaceable 30 mm Clamping height 140 mm Height adjustment 125 mm Dsdsfpb Nmjpfx Af Asci Dust extraction port 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 Light Gray and RAL 5000 Violet Blue Net weight approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Table milling machine with a permanently installed, single-sided swiveling milling spindle for a swiveling range of -5° to +45.5° Positioning control for height and swivel adjustment with zeroing of the height and offset dimension Electronic position and speed indicators 4 speeds 3000 / 4500 / 6000 / 9000 rpm Belt quick-clamping device Push buttons for spindle start and stop Left and right rotation Milling cutter quick-clamping device Finely planed gray cast iron table with rigid frame support Control panel located below on rigid frame support Milling fence 216, total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum splinter guards Machine socket Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE compliant GS tested

Condition: new, Year of construction: 2026, Consisting of a bale shredder for large round bales, type MHB, and a straw shredder, type MHZ. 1) Bale shredder MHB: Special price from €24,975 net (manufacturing time approx. 15 weeks) Suitable for round or rectangular bales. Includes a frequency inverter (FU) - this regulates the speed of the scraper bed. The bales are placed on the scraper bed and the feed of the shredder is activated. The shredder's tines tear the straw from the bale and fling it into the hopper. Ideally, the combination of a bale shredder and a straw shredder offers the best solution. Technical data, bale shredder: Capacity: 1-2 bales per hour up to a maximum of 600 kg per hour (depending on the sieve size used in the straw mill, kW number of the straw mill). Without a straw mill, the bale shredder can process up to a maximum of 900 kg/h of straw. Maximum size of rectangular bales: 2400x1200x800 mm (L x W x H) Shredder motor: 5.5 kW, 380 Volts Scraper bed feed: 0.75 kW, 380 Volts Dimensions: 3750x1730x2460 mm (L x W x H) Weight: 400 kg 2) Straw shredder MHZ 600 - 11/15 kW; immediately available Special price from €6,995 net Additional cost for the even larger straw shredder (18.5 kW): €2,750 net Technical data, MHZ with special hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting blades Sieve with interchangeable inserts Optional (10, 12, 15) 22, 30, 45 mm hole size With star-delta switch, overload protection and 8 m power cord, ready for connection Discharge spout: 160 mm Throwing distance approx. 12 m Dimensions approx. 1600 x 1020 x 1360 mm (L x W x H) Weight approx. 240 kg --- Options at extra cost: Feed auger: + €970 net Cyclone separator (mounting by customer) *should be located a maximum of 10 m away + €2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstration unit) + from €9,950 net Optional with rotary valve *makes the material pressure-free + €5,750 net Control system: from €1,620 net Special shredder extension, 3 m *other sizes can be calculated + €9,750 net Briquetting press MPP 180 S; little used demonstration unit 70 mm briquette - up to a maximum of 100 kg/h from €39,700 net * larger machines on request --- Description: The muetek bale shredder has been developed for shredding round and rectangular bales of hay and straw. The shredder attached to the bale shredder shreds straw from all types of cereals, hay, corn and miscanthus. The muetek machines of the MHZ / MHB series are characterized by a robust construction and solid design. The muetek bale shredders of the MHB series are equipped with a chain conveyor, on which the straw bale is placed with a front loader. The support is adjustable depending on the type of bale. The chain conveyor presses the bale against the shredder rotor, and the feed speed is adjustable. The shredder rotor is equipped with several teeth, which tear open the straw bale. The straw separated from the bale is ejected. --- In principle, the machines work for dry source materials: - Straw Dcjdpfx Aeb Nulhjf Aji - Hay --- Shredding hemp only works with a special shredder Additional cost approx. €9,720 net *depending on the design. Shredding hemp does not work with the straw mill. Requirements for the source material: Moisture content max. 12%

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,500 rpm, travel distance X-axis: 245 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 1,270 mm, overall weight: 6,300 kg, controller manufacturer: FANUC, controller model: 18i-TB, This 3-axis DOOSAN Puma 2500XLY horizontal turning machine was manufactured in 2008. It offers robust performance for precision turning operations. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2500XLY machine we have for sale. Contact us for more information. Additional equipment • Documentation/manual Machine Benefits Technical Machine Benefits • Turning length: 1270 mm • Turning diameter over cross slide: 334 mm • Turning diameter: 334 mm Dedpox D H Aqefx Af Aoci • Spindle bore: 86 mm • Tool holder: 55 mm • Speed infinitely adjustable Extra Information Machine still under powerClamping range 30–150 mmMaximum opening 170 mmMeasuring arm for tool measurement

Condition: good (used), 1 used surface grinding machine Manufacturer: Jung Model: HF 50 Technical specifications: - Z-axis travel: 400mm - X-axis travel: 500mm - Y-axis travel: 200mm - Table length: 720mm Dsdoxgbb Tepfx Af Ajci - Maximum spindle speed: 4000rpm - Table width: 200mm - Minimum spindle speed: 1000rpm - Transport dimensions: 2300mm x 1500mm x 1700mm (L x W x H) - Transport weight: 2000kg Equipped with: - Digital readout - Diaform device

Condition: excellent (used), SCM T150 Spindle Moulder Spindle diameter: 35 mm Total spindle length: 180 mm Electric spindle lift Electric fence movement Electrically adjustable tilt angle -10/45° Variable spindle speed: 3000-4500-6000–7000-10000 rpm Motor power: 5.5 kW DTR technical documentation Dodpfx Ajw Ral Hjf Aoci