Centrifugal Pump LKH

Alfa Laval LKH 85/240 SSS

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Pgodpfjwp Rqfjx Akfjk Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: good (used), tem: D-7856-Samson-steam Valves Diverse steam valves made by Samson complete with control box! Pgedoirfb Espfx Akfjk For more informations please contact us! DN 20/DN40/DN50/DN65/

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. Pgsdpfepugwiox Akfsk The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) Podpfsif Ek Rox Akfogk (Product photo as example) The machine is CE certified.

Year of construction: 2022, condition: new, Load capacity: 10.000kg Psdpfefxgp Uox Akfogk Speed: 0.03- 1.6 rpm faceplate diameter: 1.500mm, expandable to 2.500mm welding current transmission: 800A

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 1 used steam boiler ----- - mounted on frame - Manufacturer: Bay Kessel - BBS Germany Type: HDK 7000 Capacity approx.: 7,000 kg/h Operating overpressure: 10.0 bar Increased test pressure: 18.5 bar Max. steam temperature: 184.6 °C Pgedpfx Akjx A Dplofek Water content full approx.: 17,500 l Year of manufacture: 2017 CE marking: CE 0036 Equipped with Weishaupt gas/oil burner WM-GL50/1-A, version ZM-R-NR, gas control line, separate control cabinet, feed water pump, Eco, and existing coarse and fine fittings.

Condition: used, DALLAN Rollforming machine | Omega profiles 60mm & 80 mm With 11 forming stations, fully equipped and currently set up for Omega 60 mm, the line includes additional tooling for Omega 80 mm profiles. This machine is complete, in excellent condition. DALLAN rollforming line with 11 forming stations: · Maximum sheet width: 300 - 350 mm · Controls: Dual console · Shaft diameter: 60 mm · End unit: Integrated cutting station · Current setup: Configured for classic Omega 60 mm, includes tooling for Omega 80 mm · Idle decoiler · Tooling box (approx. 1,000 kg) for producing other profile types · Dimensions: 10,000 x 1,400 x 1,600 mm (L x W x H) · Weight: 10 tons Maximum sheet width: 300 - 350 mm Controls: Dual console Shaft diameter: 60 mm End unit: Integrated cutting station Pgodpfxoxugf He Akfok Current setup: Configured for classic Omega 60 mm, includes tooling for Omega 80 mm

Condition: used, Name: Used Decanter Centrifuge Manufacturer: Alfa Laval Type: DSNX 4545 Year built: 2000 Max. bowl speed: 3.250 rpm Hours of operation: 16.700 hours Pgodpfx Akjxrkknofek Material: Stainless steel Driving force: 37 kW Inner diameter drum: 450 / 258mm Permissible sediment density: 1,2 kg/dm3 Max. operating temperature: 100 C° Dimensions: L 3.700 x W 1.100 x H 1.300 mm Empty weight: Approx. 2.800 kg Technical doc.: Yes Accessories: Frequency converter, solids slide valve + channel, liquid discharge funnel and reversed eddy current brake Condition: Second hand Price: By request

Condition: excellent (used), 16 end mills with indexable inserts Make Walter Weight 9.5 kg Pedpfxjdx D Tvo Akfjgk

Condition: used, Year of construction: 2007, Overview The machine was built in 2007 by Spanish company Seppelec. The machine is still assembled but not in use since the factory closed the production. Before decommissioning, the machine was intensively maintained and tested with phosphorescent material.   Techn. Details Capacity: 13,500 l/ h Pressure to prevent degassing: 7 bar Temperature while pasteurizing: 85°C Machine documentation Heat exchanger plate | SPX Flow | H17 | 2013 Control: Siemens S7-300 Cpu 314 2dp Communication port type: Profibus Pgsdpfx Akeq T Ak Hefsk