Used veneer cutters for sale (31)

Condition: like new (used), Working width 3600 mm Maximum height 70 mm Hydraulic cutting Photoelectric safety guard Motor power 7.5 kW CE certification 400 V Year of manufacture 2022 Weight 6200 kg Pjdjxz Rmzjpfx Ab Iord

Condition: like new (used), Year of construction: 2012, I sell the veneer saw with moulding premilling router Manufacturer: Casati Macchine Modell LZ 3100. Year 2012. Pjdpfx Abjxawnio Ijrd Cutting length 3100mm. Very good condition. Available immediately.

Condition: excellent (used), Veneer Guillotine Casati Macchine CIM31 Working length: 3,100 mm Max working height: 45 mm Prodpfxoxu E Ruo Ab Iod Manual fence adjustment Maximum cutting width: 500 mm Safety light barriers

Condition: excellent (used), Year of construction: 1994, Josting Veneer Pack Cutting Machine Type: EFS 2300 L - Year 1994 Cutting length: 2,300 mm Maximum insertion height: 80 mm Pjdpfexgbwzex Ab Ijrd FIESSLER safety light curtain Alignment light for cutting position display Parallel fence motorized adjustment, fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Dimensions: 3,610 x 1,700 x 1,680 mm Ex-works: - available immediately -

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 241 143, cutting length (max.): 3,600 mm, Veneer shears with one blade; length: 3.60 m Predpfxswql N Ss Ab Ied

Condition: good (used), Code: 0193 Brand: CASATI MACCHINE Model: BIG 3200 - CE Standard Hydraulic two knives veneer pack guillotine shear - CE Standard Description: Sturdy steel made structure, cast iron knife beam. Self-lubrificating prismatic slide-ways The machine allows, with a single operation, to cut the veneer pack on both sides to be trimmed - The simultaneous trimming on two sides of the veneer pack is carried out thanks to the movement at the same time, of two knives, one fitted on a fixed structure and the other one on a moving part - The machine is equipped with an adjustable rear shoulder, as well as with a pressor to clamp the veneer pack during cutting operations. Possibility of working as a single guillotine shear Useful cutting length (as double guillotine shear) mm 3200 Useful cutting length (as single guillotine shear) mm 3550 Pressore stroke mm 100 Pressor width mm 550 Min width to be cut mm 18 Max width to be cut mm 530 Scrap adjustment field mm 0/50 Photoelectric cells Electronic programmer allowing to program the number of cuts to be effectuated and the relevant width Perimeter protections Prjdpfx Ajqzky Eob Isd Total power installed Kw 13, 9 Operating pressure bar 6/7 Overall dimensions mm 5200 x 1700 x 1800 h Weight kg 9000

Condition: excellent (used), functionality: fully functional, cutting length (max.): 2,600 mm, AUTOMATIC HYDRAULIC GUILLOTINE fo veneer model MONGUZZI TRA 2600 second hand machine volt. 380/50 working conditions : good technical details : max. useful cutting length mm. 2650 max. useful cutting heigth mm. 100 max. useful cutting width mm. 1000 min. useful cutting width mm. 40 hydraulic motor power Hp 5,5 Prodpjfftuwofx Ab Ied net weigth kgs. 2600 CE mark : NO

Condition: used, Stack cutter, guillotine cutter, Schneider Senator 155 Rubber, paper, and veneer shears, plastic shears, textile shears Rubber, paper, and veneer shears Machine No. 60178 Year of manufacture: 1968 Cutting length: 1550 mm Cutting height: approx. 125 mm Working height: 140 mm Back gauge max.: 1550 mm Blade drive motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Two-hand operation for cutting stroke activation - Automatic clamping: presser holds the paper stack on the table - Manual clamp and stroke activation via foot switch (operational) - Back gauge adjustable up to 1550 mm (manual handwheel adjustment) - Retrofitted electrical control unit not functional, without wiring diagrams or operator’s manual - Back gauge adjustment via servo motor (motor, controller, and control unit included, not functional) Pedpfx Abedzqnye Ierd - Without light barriers (pictured light barriers are no longer present) Required space (L x W x H): 300 x 270 x 165 cm Weight: 5100 kg Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sale price does not include the 20 mm steel plate under the machine in the warehouse.

Condition: used, Savi cutter working width mm. 700 Pjdpfsq Tx R Nsx Ab Iord

Condition: used, Year of construction: 2006, functionality: fully functional, For sale Veneer 2-knife cutting guillotine CUTMASTER Monguzzi 2600! Tech. data Cutting length 2.600 mm Length of cross-cut 1.477 mm Cutting height 100 mm Strip width min 20 mm Rip fence Yes Pressure beam pneumatic Blade drive pneumatic Weight 3.800 kg CE marking Predpfxjumlino Ab Ijd Total connection 10 kW

Condition: excellent (used), functionality: fully functional, working width 3100 mm working height 47 mm manual fence adjustment to size main motor power 4 kW Podjxdw Rfepfx Ab Iord cast iron body safety light barriers power supply 380V

Condition: good (used), Code: 0063 Brand: MONGUZZI Model: TRA-OLM 2600 - Norme CE Automatic hydraulic veneer guillotine with 1 blade - CE Standard Technical data: Sturdy structure essential to guarantee a precise and quality cut Pressure and lowering speed of the presser and blade holder independently adjustable via hydraulic valves Cutting length mm 2650 Presser opening mm 80 Cutting execution time 4 sec Presser width mm 340 ideal for blocking any type of veneer Cutting display light Photocells and safety barriers Installed power Kw 10 Work surface height mm 930 Automatic numerically controlled rear register with programs Sliding on quality linear guides Prjdpfov Igtbsx Ab Iod Side button panel for processing the end cutting side Rear safety nets Overall dimensions of assembled machine mm 4100 x 2450 x 1750 h Machine dimensions for transport mm 4100 x 1800 x 1750 h Weight kg 4000

Condition: good (used), Year of construction: 1988, functionality: fully functional, Clipper Babcock BSH - STC 28 - 1988 To be disassembled by the buyer Pjdpfst D Dg Tjx Ab Ierd

Condition: used, functionality: fully functional, cutting length (max.): 1,000 mm, This manual veneer shear is in very good condition and fully functional. It is currently located in Plankstadt near Heidelberg, but will be relocated to Bisperode near Hameln on 19.07.25, unless sold earlier. Prodpfx Ajwylhgjb Ied

Condition: excellent (used), Year of construction: 1992, I sell the double knife veneer guillotine Josting ZFS 2800. Year 1992 / fully reconditioned 2007. Cutting length 2810mm. Cutting height 80mm. Prsdpfsvxli Aex Ab Ied Cutting width 20-470mm. Very good condition. Available immediately.

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 209070, CASATI BIT 900/2000 veneer cross-cutting machine. Fully functional. Pedpfx Aeuna E Hob Ierd

Condition: excellent (used), Year of construction: 2010, Automatic four-side cutter (4 blades) Working area 2300x620 Predpfexbhzcsx Ab Isd

Condition: excellent (used), Peeler Raute 2hv57-66 Technical condition: very good, after a thorough service Prodpfxovxq Iks Ab Isd Technical data: - Max. log diameter: 130 cm - Maximum peeling length: 1450 mm

Condition: used, functionality: fully functional, Machines connected in one line (all four machines are only sold together): 1. Veneer 2-knife cutting guillotine CUTMASTER Monguzzi 2600 2. Glue application machine GLUEMASTER, year 2006 3. Roller conveyor MONGUZZI R2500, year 2009 4. Veneer fanning machine Fisher+Rueckle FANNINGMASTER AP515, year 2009 Tech. data Veneer 2-knife cutting guillotine CUTMASTER Monguzzi 2600 Cutting length 2.600 mm Length of cross-cut 1.477 mm Cutting height 100 mm Strip width min 20 mm Rip fence Yes Prsdpfxst A Nr Sj Ab Isd Pressure beam pneumatic Blade drive pneumatic Weight 3.800 kg CE marking Total connection 10 kW

Condition: excellent (used), functionality: fully functional, cutting length (max.): 2,050 mm, cutting width (max.): 680 mm, cutting height (max.): 60 mm, overall weight: 2,500 kg, total length: 3,300 mm, total width: 1,700 mm, total height: 1,500 mm, Hydraulic guillotine MONGUZZI tro 2050 Specification: • condition - used • manufacturer - MONGUZZI • model - TRO 2050 • max working width - 2050 mm • max working height - 60 mm • max width of the cut element - 680 mm • min width of the cut element - 37 mm Prodpfxsvug U Ee Ab Ied • main engine power - 4.0 kW • start-up 0-1 • analog cutting width indicator • knife length - 215 cm • feed width - 211 cm • photocell protecting against putting hands under the knife • manufacturer's documentation and spare knives - used • weight - approx. 2,500 kg • dimensions - 330 x 170 x 150 cm (length x width x height) Additional information: • the machine is in perfect technical condition, ready to immediate use • the photos shown show the actual condition of the item for sale • the device can be switched on and checked on site. • the price given in the auction does not include VAT and transport costs

Condition: excellent (used), cutting length (max.): 3,100 mm, overall weight: 4,000 kg, Cutting length (max.): 3100 mm Pedpfx Aewv Eiiob Ijrd

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 00359, cutting length (max.): 2,300 mm, cutting height (max.): 30 mm, Monguzzi 2300 TRC MP - Veneer scissors Prjdpfx Aoumvvrjb Ied Defect - oil i leaking a little from the hydraulics. Fully functional.

Condition: good (used), Year of construction: 1981, functionality: fully functional, JOSTING EFS 2600 Veneer Shear Year of manufacture: 1981 S/N 9443 Manufacturer: JOSTING Maschinenfabrik GmbH & Co. KG Model: EFS 2600 Good condition Purpose: Precise cutting and trimming of veneer sheets and veneer bundles Technical specifications: Cutting length: 2,600 mm (effective cutting width) Material thickness: up to approx. 3 mm (depending on veneer type and condition) Drive: Electric motor drive via belt and eccentric shaft Cutting principle: Upper blade moves vertically against a fixed lower blade (guillotine cut) Blades: High-quality high-speed steel (HSS), ground and replaceable Feed mechanism: Manual or optionally pneumatic/hydraulic, depending on the model Table height: approx. 850 mm (ergonomic for Operator) Backgauge: Manually adjustable with scale; Optionally available with digital display or motorized adjustment Operation: Two-hand safety control with emergency stop button Foot pedal for the clamp on certain models Clamp: Mechanical or pneumatic, ensures precise fixation of the veneer stack Safety features: Two-hand operation Emergency stop Protective covers Prsdpfx Aswmxmvsb Ied Electrical connection: 400 V / 3 Ph / 50 Hz Power rating: approx. 4–5 kW Weight: approx. 1,800–2,000 kg Dimensions (L x W x H): approx. 3,400 x 1,300 x 1,700 mm Special features: Solid, torsion-resistant welded construction High repeatability for serial cuts Suitable for all common veneer types (beech, oak, maple, exotic woods, etc.) Areas of application: Veneer processing in joineries and Furniture factories Veneer production and sorting Interior and vehicle fittings (e.g., for yachts)

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 10108, cutting length (max.): 2,900 mm, cutting width (max.): 530 mm, CASATI BIG 2600 - Double knife veneer scissors. Machine is 100% functional. Predpfx Aeum Rpgob Isd

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 181206, cutting length (max.): 3,100 mm, cutting width (max.): 520 mm, MONGUZZI AFD S35/3000 Psdpfx Aboumwb No Ierd