Panel van

RENAULT Trafic Kasten L1H1 2,8t Komfort #erst 45 tkm#AHK

Condition: used, mileage: 2,55,000 km, Year of construction: 2014, Field of application: Freight transport Serial number: WDB9066331S98xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21295 Specifications: Km: 255,000 Transmission: Automatic Tires (see pictures) Euro 6 12 seats Wheelchair ramp 163 hp Rearview camera 2 sets of wheels with tires Radio/CD Climate control/AC Service performed at local workshop Ready for delivery Notes: ABS light is on, owner suspects NOX sensor. Description:Mercedes Sprinter 316 Minibus with 12 seats.The bus is from 2014 and EU-approved.Euro 6 engine with 163 horsepower. Km: 255000 HK: 163 Technical approved: Yes EU-approved until: 18.06.2026 Own weight: 2640 Total Weight: 3500 Payload: 785 Width: 199,3 Length: 608,6 Hjdoxb N Hyopfx Adwong Euro: 6 Model: Sprinter 316 Gearbox: Automatic Number of seats: 12

Condition: used, mileage: 1,67,000 km, power: 88 kW (119.65 HP), first registration: 12/2018, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 10/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,999 mm, total width: 1,956 mm, total height: 1,951 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, navigation system, soot filter, Special equipment: * Rear parking assistance * Wooden floor in the cargo area * Mobile office package 1 * Full wheel covers * Spare wheel with road tires * Trim in cargo/passenger area Additional equipment: * Driver's airbag * Traction control system (ASR) * Exterior mirrors electrically adjustable and heated Hnedpfx Aeww Sgdedweg * 85 Ah battery * On-board computer * Rev counter * Automatic headlight activation * Rear wing doors without glazing * Cabin filter: pollen filter * Body type: panel van * Fuel tank: 80 liters * Adjustable steering column (steering wheel) * Engine: 1.6 L - 88 kW dCi diesel * Rear fog lamp * Wheelbase: 3098 mm * Low emissions according to Euro 6 standard * Sliding door right side cargo/passenger area * Seat upholstery: fabric, Seats in driver's cabin: driver's seat comfort, 3-way adjustable * Daytime running lights * Lashing rings on the side walls and on floor of cargo area * Pre-installation for body electrics * Heat-insulating glazing * New tow bar * Note: Increased oil consumption (2 l / 1000 km), vehicle is drivable but needs repair, possibly turbo. Engine smokes slightly during cold start phase, then runs clean. If you are interested in this panel van, please contact Mr. Krey Monday to Friday from 9 am to 6 pm, otherwise please send me an email and I will get back to you promptly. I speak German, English spoken, on parle français. Errors and omissions excepted.

Condition: new, functionality: fully functional, mileage: 8 km, fuel type: diesel, Year of construction: 2024, Equipment: air conditioning, hydraulics, I am offering a brand new Zoomlion ZS090V skid steer loader, weighing 3 tonnes. The machine is available immediately and is ideally suited for loading, transport, landscaping, as well as road and construction works. - Year of manufacture: 2024 - Fitted with a powerful, fuel-efficient Kubota V2403-CR-T engine compliant with current emission standards - The cab ensures operator comfort thanks to air conditioning, an ergonomic seat, excellent visibility, and a reversing camera - The machine features hydrostatic drive and a precise hydraulic system for smooth attachment operation and rapid response - Rated operating capacity: 901 kg - 0.5 m³ bucket available at an additional cost - The loader is agile, stable, and ready for heavy-duty work in various terrain conditions - Manufacturer’s warranty applies - VAT invoice provided - Immediate availability; collection in Kolbudy or delivery within Poland available - Assistance with arranging sea freight from any European port - Additional attachments available separately – we offer a wide range of accessories to tailor the machine to specific tasks Financing options: We offer financing through leasing or credit. We assist in selecting the most advantageous solution and handle all formalities. We cooperate with reputable financial institutions: Hnjdpfx Adsxwd Hyewog Deutsche Leasing S.A / MLeasing Sp. z o.o. / Siemens Finance Sp. z o.o. / Pekao Leasing Sp. z o.o. / PKO Leasing S.A / PEAC Poland Sp. z o.o. / Nest Lease S.A / Alior Leasing Sp. z o.o. Financing terms: - Simplified procedures up to 1 million PLN - Own contribution: from 0% to 45% - Financing period: up to 96 months - Currency: PLN or EUR Call or write for more information. I will be happy to answer your questions and help you select the right attachments. This announcement does not constitute a commercial offer within the meaning of Art. 66 §1 of the Polish Civil Code.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice Hnedpfsfg E Hlex Adweg • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Year of construction: 1991, operating hours: 0 h, condition: used, machine/vehicle number: 20086, Sliding door For sale is a 1991 Chevrolet Step Van manufactured by Grumman Olson. Vehicle is equipped with a 6.2L V8 OHV 16V DIESEL. Mileage 178460 Miles The hatch in the rear can be opened without any problems. The general condition is good. Vehicle is sold as is with US Title. A data sheet must be procured itself what is needed for registration in Germany. If you have any questions, please contact me by mail or phone, quoting the internal number 20086. Hsdpfx Adohrf H Tewjng

Condition: used, machine/vehicle number: YS2R6X2000122xxxx, mileage: 6,00,000 km, Year of construction: 1997, Please contact ATS Norway for more information Please provide reference number upon request: 20740 Specifications: Km: Approx. 600,000, printer has been replaced Manual transmission Suspension: Steel - Air Tires (see pictures) 20T hook w/knuckle Multilift superstructure Trailer hitch Bed Ready for delivery Notes: Driveable on the surface, doesn't pull uphill as it should Some costs must be calculated here. Km: 600000 Technical approved: no EU-approved until: 10.06.2022 Hnjdpfxjwvy Ito Adweg Own weight: 11500 Total Weight: 29000 Payload: 17425 Width: 250 Length: 820 Euro: 2 Gearbox: Manual

Condition: used, machine/vehicle number: YV2RT60FXKA84xxxx, mileage: 5,874 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 20511 Specifications: 2021 model 7350 km (will go a little) 721 Engine hours Hsdpfx Aowphixjdwsng 241 Crane hours Euro 6 engine 8x2 551 HP Suspension on 1st and 2nd axle: Steel Suspension on 3rd and 4th axle: air 2 x 110 liter variable pumps 2 x manual extensions for main boom and 2 x for jib Scanreco optical remote control (Top model) Weight cell main boom Additional function for main boom and jib Auto leveling (The car puts itself in a level position ready for lifting.) Virtual space (Possibility to limit all axes with a few keystrokes, no need to open a workshop for this. Brilliant when working under high voltage etc.) SKF central lubrication ring and up to the first link Extra function all the way up the jib Single winch hook (Jib / main boom) 2 shear winch hooks (Jib / main boom) 4-point winch hook (Main boom) Hook for jib Hook for main boom (Large hook) N d lower the generator (24 volts) Cable stop sensor and sleeve 4 ton winch Diagnostic cable for online help (Remote help) Danfoss valve center 2 x 2 ton counterweight (M is only used for cranes above the cabin, otherwise the counterweights are not needed, and these can be removed as needed) Front support leg   Structure: 4 x work lights strategically placed inside each outrigger cabinet. 50" LED bar work light at the rear of the cab Powerful LED lights in the crane. VBG mount, with air servo control unit mounted in rear cabinet left side. Roof rack 2 high beam LED bar on roof forward (daylight!!). Orange work warning LED beam on the roof. EasyUp foldable ladder with side railing. Boxes for chains, screws, etc. Mounted on the rear support legs so that they are extended together with the support legs and are also packed away while driving. Charger for control in cabin Plastic inner fenders axle 3 and 4. 3 edge pull-out cabinet between axles 3 and 4 On the left side between axles 2 and 3, a large cupboard with a 500 W fan heater is installed for hanging clothes to dry, etc. Flat / bottom rear closed with alloxed aluminum door panels that are cut to fit the car perfectly, with rounded edges for a very professional look. CNC manufactured plates up the back of the cabin. Fully painted sides, cabin and stern. Crane rest cradle for operation without jib. 5 pcs support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cribs at the back of the "plan" Right side large cabinet 1.2 x 1 meter Powerful LED reversing/rear work lights. The rear of the car was rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages. Hatches strategically placed for access to relevant facilities under the building. Precisely cut out panels in side...

Condition: new, functionality: fully functional, he EUROPA JAINNHER JHV-1008CNC vertical grinding machine is designed for grinding of large components used in the transport, aerospace, power generation, oil & gas, hydraulic and precision components. With a grinding internal diameter range from Ø50 to 800 mm, a maximum outside diameter of Ø1000 mm. The maximum height of the workpiece is 800mm, with a maximum worktable load of 1200 kg. EUROPA Jainnher JHV-1008 CNC Vertical Grinder Capacity Range of I.D. grinding 50 – 800mm Maximum O.D grinding 1000mm Z axis maximum grinding height (OD) 800mm Z axis maximum grinding height (ID) 50 – 250 : 325mm / 250 – 800 : 800mm Maximum swing diameter 1000mm Hnsdpfx Adsnzkvhswog Maximum installed component height 800mm Maximum work table load 1200kg Email for latest factory build availability

Condition: new, Year of construction: 2025, ⭐️ CAPACITY FROM 1 TON TO 100 TONS ⭐️ ⭐️ DIMENSIONS – CUSTOM SIZE AGREED WITH THE CLIENT ⭐️ ✅ Overhead crane, commonly called a bridge crane, eot crane, is a type of crane found in industrial environments. An overhead crane consists of parallel runways with a traveling bridge spanning the gap. A hoist, the lifting component of a crane, travels along the bridge. ✅ Usually there are include many kinds of types crane, firstly it was divided into single girder and double girder overhead crane. There are included normal type, european type, magnetic crane, grab crane, explosion proof crane, and so on. ✅ According to the different using environment and different application. We will choose the most suitable crane for customer Hnodpfxewr A Ale Adwog

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm Hnsdpsv Td Elofx Adweg