Scraper for filtercake

REWA blau

Condition: new, Scraper in PE - MD, color blue in semi-hard, somewhat flexible design. For process engineering in the field of filter presses. to remove the filter cake. Length: 410 mm Rjdped Ey Rwefx Abpocf Handle length: 210 mm Width 125 mm

Condition: good (used), filter area: 75 m², pressure: 15 bar, System: used chamber filter press ( refurbished ) Design: side rail guided Construction: optional according to customer requirements, e.g. also mounted in a container Filter plate format: 800x800 mm Number of plates: 68 Filter plates: PP Cake thickness: 30 mm Drain: closed Filter cloths: optionally available depending on the medium Filter area: approx. 75.21 m² Press capacity: approx. 1081.2 dm3 Rcodsqakhuopfx Abpof Plate pack length: approx. 4243 mm Filter pressure: approx. 15 bar Plate transport: manual Plate closure: electro-hydraulic plate closure Safety equipment: optional according to customer requirements and design Accessories: optional as special accessories Control cabinet: optional Electrics: electrical wiring of all consumers optional. Pump technology: optional Condition: refurbished Purchase or rental: Viewings of the systems by arrangement at our factory. Would you like to rent or buy this system? Please contact us, we will be happy to assist you.

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. Rcsdpfetmqi Dsx Abpef The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: used, System: Chamber filter press mobile, used Type: Netzsch Application area: sludge dewatering Figur-No.: 012.73/319.73/665.73/TH Rodpfxswqydws Abpscf Commission No.: 040.417 Filter plate size: 1200x1200 Number of plates: approx. 100 Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 250 m2 Press volume: approx. 3540 dm3 Filter pressure: approx. 15 bar Pump 1: SEEPEX Type BN 35-12 Commission number 266222 Pump 2 SEEPEX Type BN 10-24 Commission number 266223 Pump 3 SEEPEX Type BN 75-6LT Commission number 266224 Washing system No Conveyor technology yes Polymer system yes Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental Rental or purchase. Inspection of the systems by arrangement at our works.

Condition: refurbished (used), filter area: 459 m², pressure: 15 bar, cake thickness: 30 mm, Plant: Chamber filter press, tunnel design, second-hand Design: head-guided Filter plate format: 1200x1200 mm Number of chambers: 100 Cake thickness: 30 mm Filter plates: PP Filter cloths: optionally available in coordination with the medium Drain: closed Filter area: approx. 459 m² Press capacity: approx. 2999 dm³ Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min. 10° max. 50° Plate transport: automatic Closing: electro-hydraulic Motor voltage: 380 V Control voltage: 230 V - 24 V Control cabinet: included Accessories: optional according to customer requirements and design Rcedsqa Dv Tspfx Abpof Safety device: optional Condition: This system is available as a used system - ready for operation. Refurbished service: optional - The system is refurbished after receipt of order. Special service: optional - The system is set up according to your requirements after receipt of the order. Purchase or rental: Viewings of the systems by arrangement at our factory.

Condition: good (used), Year of construction: 1980, filter area: 98 m², pressure: 15 bar, cake thickness: 25 mm, Plant: used mobile chamber filter press / filter press Manufacturer: Filox 800 x 800 Year of construction: 1980 Plate size: 800 x 800 mm Effective length: 5200 mm Number of chambers: 88 pieces Cake thickness: 25 mm Filter pressure: 15 bar Closing pressure: Min. 300 bar, max. 320 bar Total filter area: approx. 98 square meters Rodpfxsqa Dtqj Abpecf Total cake volume: approx. 1100 liters Motor voltage: 380 V, 50 Hz Protection class: IP 44 Plate material: PP Drain: open Operating side: left Cloths: Optional

Year of construction: 1989, condition: reconditioned (used), The filter press was revised and checked by our workshop in 2023. Rcedpel Uvxksfx Abpof Name: Chamber filter press Manufacturer: Passavant Type: AX1200 Year built: 1989 / 2023 Construction form: Bridge beam press Filter pressure:: 15 bar Press content: Approx. 2200 liters Cycle: Closed Filter area: Approx. 155 m2 Plate size: 1200 x 1200 mm Number Plates: 62 Plate material: Polypropylene Plate Transport: Automatic Plate pack length: Approx. 4200 mm Cake thickness: 30 mm Dimensions: L 7600 x W 1600 x H 2250 mm Message: Workshop revised in 2023 Accessories: A control cabinet and a hydraulic system Condition: Used good Price: On demand

Condition: good (used), A-100730-Horizontaltank 16m3 Horizontal tanks 16.000 L, Rcedpfx Ajiiyufebpjf Stainless Steel AISI 316, Dimension: Ø 2530 mm X H 2900 m L 3800 mm Manhole at front Only 2 pieces identical to offer

Condition: used, Name: Filter Press Manufacturer: MSE Type: KFP1000-90/60-25 Year built: 2011 Construction form: Side beam press Filter pressure:: 15 bar Press content: Approx. 1177 liters (expandable to 1766 liters) Cycle: Open Filter area: Approx. 101 m2 (expandable to 152 m2) Plate size: 1000 x 1000 mm Number Plates: 60 (expandable to 90) Plate material: Polypropylene Plate Transport: Automatically Filter cloth washer: No Cake thickness: 25 mm Rodpfx Abermmp Iepjcf Closing pressure: 350 bar Dimensions: L 7900 x W 1950 x H 2000 mm Empty weight: approx. 1400 kg Technical doc.: Yes Accessories: Drip trays, 25 replacement plates, control cabinet, hydraulic system, light curtain Condition: Second hand Price: On demand

Year of construction: 2026, condition: new, MSP 1100 Belt Filter Press The entire system can be disassembled down to the base frame within minutes! Fully automatic fruit and vegetable press with a closed processing chamber to minimize oxidation. Two high-pressure nozzles are mounted beneath the machine and rotate continuously to ensure optimal performance. Due to the reduced distance between the press rollers and the juice collection tray, foam formation is no longer an issue. Most machine components can be disassembled without tools, making cleaning easy. Equipped with heavy-duty, vibration-damping machine feet. Requires minimal maintenance. Technical Specifications: - Rated capacity: 1,100 kg/h - Power requirement: 1.5 kW, 400 V, 6 A, three-phase Rcodorz I Hqjpfx Abpjf - Material: Wnr. 1.4301, AISI 304 stainless steel - Dimensions: 2200 x 1330 x 1200 mm - Feed height: 1250 mm - Dry matter discharge height: 470/770 mm - Weight: 950 kg - Includes integrated juice pump, collection tank, and level switch - Touchscreen control - Electronics to IP65 - Extra high juice yield: 75% (depending on freshness and quality of the produce) - Air requirement: 50 l/hour at 6 bar - High-pressure water requirement: 360 l/h - Frequency inverter: variable speed control for even more professional processing - High-strength, food-grade polyester press belt, fiber thickness: 2 mm, weave density: 6×16 fibers/cm², ½-twill weave (suitable for pressing without large fibers) - Easy to clean - Requires minimal maintenance - Adjustable, with vibration-damping machine feet - Brush roller for belt cleaning A high-pressure cleaner and air compressor are required for operation.