Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder, vibratory bowl, sorting dev

RNA Rhein-Nadel Automation SRC-N 250-2L

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Hjdpfx Akeuzn Nnezon Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: good (used), Year of construction: 2007, table length: 800 mm, table width: 800 mm, Equipment: CE marking, documentation/manual, Horizontal machining center Machine type: Mori Seiki NH 8000 DCG Control system: Fanuc 18 imb + Mapps 2 Year of manufacture: 2007 TECHNICAL DATA: Travel ranges: X-axis: 1,400 mm Y-axis: 1,200 mm Z-axis: 1,200 mm B-axis: 0.001° Rapid traverse rate (X/Y/Z): 50 m/min. Spindle speed range: 10,000 rpm Drive power: 30 / 25 kW Tool holder: BT 50 Tool changer Number of tool positions: 140 Pallet system Number of pallets: 2 Pallet size: 800 x 800 mm Machine weight: 32,000 kg Space requirement (L x W x H): 9,200 x 4,900 x 3,920 m Equipment features: Hedpfx Akov Nhylozen Internal coolant system (ICS): bar Chip conveyor High-pressure pumps

Condition: used, Vibratory bowl feeder / Sorting device / Bowl feeder / Vibratory feeder RNA Vibratory bowl, sorting device / Screw feeding system with vibratory feeder for screw technology Feeding system, feeder device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6,000 rpm Power supply: 230 Volt, 50 Hz - The feeder was used for feeding automotive blade fuses Installation space required Ø x H: 420 x 390 mm Weight: 52 kg Good condition Hedpfx Aksy N Dvbszjn A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which causes the sorting bowl to vibrate by mechanical oscillations, setting the parts in motion.

Condition: used, Vibratory Bowl Feeder / Sorting Unit / Spiral Feeder / Vibratory Conveyor RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving applications Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 30 mm Hodpfx Asux Shvokzen Total height (drive + bowl with sorting track): 380 mm Oscillation frequency: 100 Hz / 6000 rpm Power supply: 230 V, 50 Hz - RNA control unit, type ESG 90, for adjustable vibration speed - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 420 x 390 mm Weight: 52 kg In good condition A bowl feeder always consists of two main components. 1) Sorting bowl, which aligns the parts 2) Drive unit, which generates vibrations in the bowl via mechanical oscillation and thereby moves the parts.

Condition: as good as new (ex-display), Various designs such as round, hexagonal or square and in smooth smooth version, cross-grooved version or with longitudinal and transverse grooves. Hodpeh Dmamefx Akzsn A current list of available new and as-new SK32/SK42/SK52/SK65/SK80/SK100 expansion chucks can be found on our homepage. We look forward to your inquiry. STALEX Machine Tools GmbH

Condition: good (used), Year of construction: 2000, 20000 rpm, Hodsr Urm Sepfx Akzen tool measurement on table will come, Parts shown by hand not come.

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Hodsvvi Nbopfx Akzsn Storage location: Nattheim

Condition: good (used), Year of construction: 2006, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 813 mm, overall weight: 13,611 kg, table length: 1,626 mm, table width: 914 mm, controller model: HAAS, nominal power (apparent): 22 kVA, rotary table diameter: 760 mm, spindle speed (max.): 6,000 rpm, table load: 4,536 kg, Equipment: chip conveyor, IBN 03/2006 IKZ 70 bar (TSC 1000) WZW 30-fold (BT50) Full 4th axis Hodpjvgmr Iefx Akzsn Spindle & gearbox new in 2017 1-shift operation Machine can be inspected under power !!!! free loading until CW04/2025 !!!! (with same-day delivery of our new machine)

Condition: like new (used), Year of construction: 2015, operating hours: 47,247 h, functionality: fully functional, machine/vehicle number: 230999, clamping force: 500 kN, screw diameter: 35 mm, displacement volume: 115 cm³, injection weight: 105 g, Equipment: documentation/manual, Here, as a dealer of injection molding machines, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines manufactured from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Type: 320C 500-170 Serial number: 203130 Year of manufacture: 2015 Operating hours: 47,247 h Control system: Selogica Dimensions L/W/H: 3.12 x 1.43 x 1.99 Weight: 2300 kg Functionality: fully operational Condition: very well maintained Extras: 1x core pull Handling interface Thermoplastic screw/cylinder 35 mm, highly wear-resistant - Complete documentation and software (on CF card) - German language - From first owner - origin Germany - Continuous maintenance by the manufacturer and previous owner Hodpjv U Tl Defx Akzsn Visible peripheral devices are not part of the offer - only if they are explicitly mentioned. Injection unit: Screw diameter: 35 mm Injection weight: 105 g/PS Injection pressure: 1,470 bar Injection volume: 115 ccm Clamping unit: Clamping force: 50 tons / 500 kN Tie bar distance: 320 x 320 mm Platen size: 446 x 446 mm Tool installation height: 200 mm Max. distance between platens: 550 mm Ejection stroke/force: 125 mm / 30 kN Clamping unit: hydraulic Motor power: 11 kW Heating power: 9.4 kW Total power: 21 kW The machine is immediately available in our warehouse in Hanover/Germany and has been tested. ✔ Warranty Warranty until the first commissioning Loading/shipping Free loading onto the buyer's truck or free delivery to the buyer's location against reimbursement of freight costs - worldwide delivery possible Immediately available in our warehouse in Hanover/Germany For information about the machines we offer and our company: - We only sell machines that we have purchased from current production and which are stored in our Hanover warehouse. - All offered machines are inspected and tested before removal. - We do not sell insolvency goods - we are not a broker dealing with third-party property. - All offered machines come from successful companies for which maintenance and care are a matter of course. - All offered machines can be viewed in our warehouse and are powered on.

Condition: excellent (used), Year of construction: 2006, FAMUP MCP 45 CNC machining center TECHNICAL DATA axes Number of axes: 3 X-axis: 450 mm Y-axis: 300 mm Z-axis: 400 mm Feed rate Hedpfx Aoq U Rm Hskzsn Work feed X,Y,Z: 10`000 mm/min Rapid feed X,Y,Z: 30`000 mm/min Working pressure force X,Y: 2000 N Working pressure force Z: 3300 N Pallet Dimensions: 400 x 300 mm Number of grooves: 2 Groove width: 14 mm Groove spacing: 80 mm Max. Table load: 100 kg Changeover time: 9 sec. Spindle Spindle motor power: 5 kW Speed: 10`000 rpm Tool changer Magazine slots: 16 Max. Tool diameter: 63 mm Max. Tool length: 150 mm Max. Tool weight: 4 kg Tool change time: 1.7 sec Weight: Approx. 3000 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information.