Pallet wrapper

ROBOPAC Wrapman

Condition: new, Film wrapping machine Rotational speed can be continuously adjusted. Table diameter can be customized according to customer requirements. Hjded A Udnopfx Abtjt Manual or automatic unwinding. Various attachments/accessories for the widest range of applications.

Year of construction: 2024, condition: new, Universal testing machine H 5 TMNI (L) 250mm, extended Mechanical design: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free ball screws, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm 1 working area up to nominal load: Working area width: 420 mm Max. testing stroke without testing tools, adapters, and central measuring device: 1270 mm Max. testing area height (between lower fixed and moving crosshead) without testing tools, adapters, and central measuring device: 1325 mm Travel speeds: Testing speed 0.001 - 1200 mm/min up to nominal load Return speed 1200 mm/min Hsdpoiq Hxvofx Abtjt Force measurement: Measuring range depending on the force measuring sensor used, 0.4 - 100% of the nominal load, Class 1 (optionally Class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/- 160,000 and +/- 900,000 digits. The machine is supplied with a factory test certificate. If a factory or DAkkS calibration is to be performed at the installation site upon customer request, this effort must be calculated separately. Crosshead travel measurement: Incremental square-wave input with encoder monitoring, storage of the crosshead position Resolution of the crosshead travel measurement:

Year of construction: 2025, operating hours: 4 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: H2,5TMNI, Universal testing machine H 2,5 TMNI L Please always send your mail address. mechanical construction: Single spindle universal testing machine with backlash-free ball screw in C-frame design with spindle protection and brushless drive motor, Fmax = 2.5 kN 1 working chamber up to nominal load: Working chamber depth: 105 mm max. test stroke without test tools, adapter and KMZ: 1375 mm max. test area height (between lower fixed and moving crosshead) without test tools, adapter and KMZ: 1375 mm Travel speeds: Test speed 0.005 - 1200 mm/min up to nominal load return speed 1200 mm/min Force measurement: Measuring range depending on the force sensor used 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DAkkS calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Hjdpfemdn Trsx Abtjt Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Pratika 80 MPS Hodpfx Ajyant Rjbtet The Minipack Pratika 80 MPS is a fully automatic side sealing packaging machine. It is designed for products with a maximum height of 360 mm and is also suitable for very long products. – Fully automatic side sealing packaging machine (continuous side sealing) – Maximum product height: 360 mm – Product lengths over 2 m possible – Usable seal bar dimension: 700 mm – Maximum film roll dimensions: Ø 350 × 800 mm – Infeed conveyor height: 915 mm – Machine dimensions (closed): 2,785 × 940 × 1,770 mm – Machine dimensions (open): 2,785 × 940 × 2,280 mm – Output: up to 3,000 packs/h (depending on product/film)

Condition: good (used), Year of construction: 2006, Compact and fast strapping machine with maximum package dimensions of approximately 600 mm wide x 600 mm high from a renowned German manufacturer, designed for high speed and trouble-free operation. Equipped with an ergonomic and straightforward spool changing and threading system. Hedpfx Abopuy Itstst -Sealing type: Hot wedge welding. -Up to approximately 42 straps per minute. -Strap type: PP strap. -Strap width adjustable from 5-9 mm: Set to 5 mm. -Strap tension adjustable on the control panel. -Soft tensioning possible. -Standby function / power saving mode. -Sturdy foot pedal. -Low-maintenance and low-wear strap frame. -Movable and lockable via foot casters. The machine can be demonstrated with power on.

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. Hedor Ix Igjpfx Abtet All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Delivery on a Euro pallet, FOB Wuppertal

Condition: used, Digitale Etikettendruckmaschine SurePress mit Tintenstrahltechnologie / Digital Label Press with Inkjet Technology Digitale Etikettendruckmaschine / Digital Label Press Epson Sure Press L-4033AW Baujahr / Year 2016 - Serial-No. RXH0000088 Hsdpsyx Ar Hofx Abtst Maximale Druckauflösung / Maximum Print Resolution: Papier / Paper 720 x 720dpi Film 1440 x 720dpi Rollbedruckstoff Durchmesser max. 100mm Druckgeschwindigkeit / Print Speed: Bis zu 5 m (16') pro Minute bei 720 x 720 dpi (auf Papier) / Up to 16' (5m) per minute at 720 x 720 dpi (on paper) Die Epson SurePress L-4033AW ist eine industrielle Inkjet-Digitaletikettendruckmaschine, die speziell für den Etikettendruck in hoher Qualität konzipiert wurde.  Besonderheit, das weiße Tintenset (AW = Auto White) ermöglicht den Druck auf transparenten Filmen und metallischen Substraten. The Epson digital label press capitalizes on Epson's acclaimed MicroPiezo® ink jet technology to create output with smooth gradations and incredible color quality. The L-4033A has six-color (Cyan, Magenta, Yellow, Black, Orange and Green), industrial-quality, water-based ink set produces a remarkable range of colors for impressive, professional and consistent results.  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Used Xante Excelagraphix 4200 for sale. Mechanically functional. The printer is currently out of ink and has been idle for almost a year. Print method: 5 Memjet drop on demand thermal inkjet print heads Print width: 1067 mm Ink colors: five channels per printhead: CMYKK Print resolution: 1600 dpi x 1600 dpi or 1600 dpi x 800 dpi Print speed: up to 416 pcs. (1067 mm x 609 mm sheets per hour) Sheet feed: manual Ink type: dye-based aqueous inks Hjdpfxjxhbw Rj Abtjt Ink cartridges: 5 ink cartridges (C, M, Y, K, K) - 2 liters Media thickness: corrugated material thickness up to 15.9 mm RIP: iQueue

Condition: new, Year of construction: 2023, functionality: fully functional, Rotary arm wrappers are state-of-the-art pallet and stretch film wrapping machines in which a powerful rotary arm combined with a reliable pre-stretch system enables precise wrapping of the pallets. This advanced technology allows the packaged goods to remain unchanged during the wrapping process. This makes rotary arm wrappers particularly suitable for pallets with light or unstable goods and for loads that are difficult to maneuver. - Maximum product height: 2,000 mm - Maximum pallet dimensions: 1,200x1,200mm - Minimum weight: 45kg Hjdpfx Aor Nc Spsbtjt

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Fully automatic flow pack machine for packaging products—regardless of their length—in a full wrap with no film overlap. Product feeding is carried out via a conveyor belt, which simultaneously folds the product into a centre-folded film using a forming shoulder. Product indexing is controlled by a photoelectric sensor. The infeed conveyor can be easily adjusted to different product widths. Longitudinal sealing is accomplished by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully operational. Technical Specifications - Cross sealing bar: 450 mm - Film: centre-folded film, approx. 12 - 80μm - Film roll outer diameter: max. 400 mm - Film roll width: max. 600 mm - Min. product length: 120 mm - Min. product width: 80 mm Hsdpjw U A Eqsfx Abtst - Passage height: 200 mm - Working height: 780 – 930 mm - Power supply: 400 V three-phase current, 50 Hz with protective earth - Rated power: 3.5 kVA - Rated current: 5.1 A Tunnel passage width: 650 mm Tunnel passage height: 200 mm Viewing and demonstrations are possible at our premises by appointment. Functional guarantee, no warranty.