Schütz IBC Container - 640L Tank

Schütz IBC 640l

Year of construction: 2003, condition: good (used), Weishaupt gas burner Monarch Burner type G7/1-D Version ZMD Ledpjmdpczefx Adwohb Power 300 - 1750 KW Including gas line ( gas fitting ) Burner was recently in operation

Condition: new, Custom-tailored personal quotation Lodpfx Aoxzfkzodwehb

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Lhjdpswki Apefx Adwjb Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: excellent (used), Year of construction: 2008, Weishaupt RGMS 30 dual fuel burner gas+heavy oil Output: 2600Kw Year: 2008 Viewing by telephone only! Lhjdpfx Adjmnqbwswsb Preferred sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: excellent (used), functionality: fully functional, axle configuration: 4x4, Year of construction: 2010, operating hours: 4,212 h, For sale freshly imported from Denmark Spindle mower for leveling football pitches or golf courses, The mower is characterized by the fact that it has a cabin and is a JOHN DEER with a YANMAR engine manufactured in Japan, it has 5 mechanisms for leveling grass 5x75cm in total 3.45m cutting width. Lhedpfewc Rcbjx Adwsb Fully functional, regularly serviced comes from the first owner who worked with it on the golf course. Mileage approx.: 4200 mth Year of production: 2010 Everything is functional. Technical data: Yanmar engine Capacity 2.1cm3 Power: 31kW 4 cylinders diesel Cutting width: 3.45m Maximum speed: 15kmh Hydrostatic drive 4X4 - with the possibility of adjustment Has a cabin Equipment: Radio Heating Lights Turn signals Wipers Adjustable seat Traction control Control everything in the cabin == The John Deere 1905 series, five-unit reel mowers, have a total cutting width of 345 cm (136 in) with a working speed of up to 15 km (8 miles) per hour. Designed primarily for use on golf courses and football pitches, this four-cylinder mower is equipped with a 51 HP (max) Yanmar diesel engine, hydrostatic transmission, Command Arm control and four-wheel drive. From the outset, the models have been equipped with 76 cm (30 in) wide ESP reels, which is particularly important for golf course managers, for whom top performance is of the utmost importance.

Condition: excellent (used), FRYMA MZM / VK - 50 Cream Manufacturing Plant This Plant with usable volume of 50 L is suitable for manufacturing creams, ointments and suppository masses etc and can also handle foamy products. Total volume: 73 litres Min. fill volume: 10 litres Homogeniser: Brienz RF 112 M - 2 - 4.0kW - max. 2,850 rpm Mixer - scraper: SEW FAF 37 - max. 28 rpm Manufacturer: Fryma Koruma Year of construction: 1998 Floor Space: 120 x 150 x 200 cm Lhjdpfx Adeuf A Rlewob

Condition: used, Year of construction: 2016, Overview  This weighing and packaging line was built in 2016 by the Spanish manufacturer Volpak. The system is fully equipped, in very good technical condition and shows only minor wear. The system is still installed and connected and can therefore be viewed in person at any time. Technical details Output: 60 bags/minute Doypack/flat bag formats: 20/25g, 50g, 300g, 500g, 750g Possibility of micro-dosing powders Modern wide zipper/belt Scope of delivery  Doypack packaging machine | Volpak | SI-280 F1 Multi-head weigher | Ishida | CCW-RV-228-S/05-SS 4 raw material unloading stations Lindor mixer Cox & Plant feeder between the unloading stations and the mixer and multihead weigher Ishida X-ray unit with recoil, IX-GA-4075 Ishida dynamic check weigher with DACS-G-S0 recoil Installation for the injection of nitrogen or another inert gas, together with a measuring system Dust extraction system Euro slot Smooth welding system Lodpfx Astz H T Dodwohb

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 175 kg, fuel type: diesel, tank capacity: 15 l, color: black, output current: 20 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 11 kW (14.96 HP), continuous power: 8.5 kW (11.56 HP), total length: 800 mm, total width: 700 mm, total height: 750 mm, rotational speed (max.): 3,000 rpm, type of cooling: air, Diesel generator set with a power output of 8.5kW and 11kW. The Proton 10000 360 is characterized by Dual Power technology, thanks to which the user is able to obtain 80% power on a single-phase socket and 100% power on a three-phase socket. SHORT: Genset type: DUAL, Single-phase, Three-phase Fuel type: Diesel Air-cooled: Yes Voltage: 230/400V Rated power: 400V - 8,500 watts (10.6kVA) Maximum power up to 15 minutes - 11,000 watts (13.75 kVA) Rated power 230V - 6800 Watt Maximum power up to 15 minutes - 8800 Watt WEIGHT: Gross weight: 175 kg FUELING: 2.0 liters per hour (at 70% of maximum power) 1.7 liters per hour (at 40% of maximum power) TECHNICAL DATA: Prepared for operation - Yes Type - Portable Year of manufacture - 2024 Condition of the unit - Factory new Manufacturer - Proton Warranty - 24 months Efficiency cos Φ - 0.8 ENGINE: Engine model - Proton 292F-D0 Fuel type - Diesel (Diesel) Engine type - High compression, 4-stroke Number of cylinders - 1 Direct injection - Yes Type of cooling - Air Displacement - 667 cc3 Number of revolutions per minute (RPM) - 3000 Permissible maximum operating time (1 cycle) - 8 hours Cooling time (after 1 cycle) - 60 minutes Oil pressure and level sensor - Yes Type of valve train - Gear-driven valve train Engine speed controller - Mechanical Lubrication method - Forced, engine with oil pump Starter - 800W Oil sump capacity - 2.0l Recommended oil - TITAN CARGO MC 10W40 (semi-synthetic for diesel). Valve type - Electromagnetic, controlled by a single solenoid GENERATOR: Generator model - Proton 200-CAVR-D Rated current (400V) - 20 A Voltage - 230/400V Frequency - 50 Hz Construction of the alternator - Synchronous Degree of protection (of the alternator) - IP 23 CABINET: Housing type - Unbuilt - Open. Ability to discharge exhaust fumes outside the facility - Yes Sound pressure level LPA - 87dB (measurement - 5m, open space) Fuel tank capacity - 15 liters Operating time on a full tank (Average) - 6 hours SOCKETS: Number of three-phase outlets - 1 piece (16A 5-pin) Number of single-phase sockets - 1 piece (16A), 2 pieces (8A) Number of other sockets - 1 piece (12V) DIMENSIONS: Diameter of wheels - 22 cm Width - 70 cm Length - 80 cm Height - 75 cm FEATURES: DualPower™ technology - Yes Automatic start (ATS) - Yes - adapted Voltage stabilizer (AVR) - Yes - built-in Remote control - Yes (up to 90m outdoors) Starting type - Electric Glow plugs - Yes Fuel level indicator - Yes Voltmeter - Yes Ammeter - Yes Current protection - 3xC16 (for 400V), 1xC32 (for 230V) Hour meter - Yes Battery - 36 Ah Transport kit: Yes - Large wheels Yes - Handles Lhsdotq Ua Uepfx Adweb RICH EQUIPMENT See below what else the kit includes: - Battery - Air, oil, fuel filter - Keys for ongoing maintenance - Plugs Why our company? We are a company specializing exclusively in generators, for more than 17 years we have been in this business constantly striving to make our products represent the highest quality and most reliable. We have a wide range of generators from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: new, Year of construction: 2024, Consisting of large bale breaker Type MHB and straw shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (lead time approx. 15 weeks) Suitable for round or square bales. Includes frequency converter (FU) – regulates the speed of the chain conveyor. The bales are placed on the chain conveyor, and the milling advance is activated. The milling tines tear the straw from the bale and hurl it into the hopper. Ideally, the combination of bale breaker and straw shredder is recommended here. Technical data – Bale Breaker: Performance: 1–2 bales per hour Up to max. 600 kg per hour (depending on screen size used in the straw mill and kW rating of the straw mill). Without straw mill, the bale breaker can process up to max. 900 kg/h straw. Max. square bale size: 2400 x 1200 x 800 mm (L x W x H) Milling motor: 5.5 kW, 380 Volt Chain conveyor feed: 0.75 kW, 380 Volt Lhsdpfx Ajb Nulhodwjb Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for even larger straw shredder (18.5 kW): + €3,940 net Technical data, MHZ with special hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting knives Screen with interchangeable inserts; selectable perforations (10, 12, 15, 22, 30, 45 mm) With star-delta switch, phase protection, and 8 m power cable, plug-in ready Discharge nozzle: 160 mm Blowing distance approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Optional extras for a surcharge: Feed auger: + €970 net Cyclone (suspension by customer on site; should be no more than 10 m away): + €2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstrator): + from €9,950 net Optional rotary valve (renders material pressureless): + €5,750 net Control panel: from €1,620 net Special breaker extension 3 m (other sizes on request): + €9,750 net Briquetting press MPP 180 S; little used demonstrator 70 mm briquette – up to max. 100 kg/h from €39,700 net * Larger machines available on request --- Description: muetek bale breakers are designed for breaking up round and square bales of hay and straw. The shredder flanged to the bale breaker shreds straw from all types of cereals, hay, maize, and miscanthus. muetek machines of the MHZ / MHB series are characterized by robust construction and heavy-duty build quality. muetek MHB series bale breakers feature a chain conveyor onto which the straw bale can be placed using a front loader. The support surface is adjustable depending on bale type. The chain conveyor pushes the bale against the milling rotor. The feed speed is adjustable. The milling rotor is equipped with several teeth that tear open the straw bale. The separated straw is discharged. --- The machines are generally suitable for dry input material: - Straw - Hay --- Breaking up hemp bales is possible only with a special breaker (surcharge approx. €9,720 net, depending on configuration). Straw mill is not suitable for hemp processing. Requirements for input material: Max. moisture content 12%

Condition: like new (used), Eillert C25 H Potato rumbler Stainless, 25Kg capacity, suitable for potatoes, carrots and other root veg, 3Ph Lhodpfxshpqyko Adweb