Precision turning lathe

Scherer Feinbau PM

Condition: good (used), functionality: fully functional, Technical data: Centre height 110 mm Nedpfx Absznc Tyowjcw Centre width 160 mm Spindle bore 23 mm Motor power 1.7 kW Speed can be set via potentiometer from approx. 100 - 2,300 rpm 3 pre-selected speeds or 3 switching levels . Scope of delivery, machine with: Operating modes: Manual + automatic Pneumatic clamping device Tilt tailstock with 2 sleeves for K 12 collets, with control switch for switching Hand lever cross support with 4 stops, consisting of cross and longitudinal support .

Condition: ready for operation (used), Selling a well-maintained Mikron VC 1000 milling machine due to the purchase of a new machine. Nsdpfx Ajh Tnpxobwjcw

Condition: excellent (used), Description to follow! Nsdszkl Dgepfx Abwjcw

Condition: excellent (used), Description to follow! Ncjdpfjzkl Dmjx Abwsw

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Nedsyn Em Ropfx Abwscw Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Description to follow! Ncedpfx Aozkl Daobwow

Condition: excellent (used), functionality: fully functional, 1 x Tailstock lathe Precision engineering PM 1-FZ Equipment: - Hand lever cross slide with Tripan quick-change system - Electric tailstock for drilling and threading - Collet chuck with draw-in collets Ncodpfxozl Dr Es Abwsw Technical data: - Spindle bore: 23 mm - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Distance between centers: 160 mm - Maximum diameter over bed: 220 mm Accessories: 20 x Draw-in collets 359 E K 23 (1 - 20 mm/ 1 mm increment) 1 x Draw-in collet in tailstock 319 E K 12 1 x Tripan tool holder with 1 cassette Operating manual (copy) Additional accessories, such as collets, are available at an extra charge. The machine can be inspected while powered on.

Condition: used, Technical details: table diameter: 450 mm rotatability of the table - manual/mechanic: 360 ° clamping table - swivable: 90° mechanisch Grad weight of the machine approx.: 100 kg dimensions: L: 800 x B: 700 x H: 400 mm The surface of the round table is scraped. Very good condition! micrometer precise locking Positioning in the 0.01 mm range T-slots according to DIN 650 radial Nodpfxou N D Ayj Abwscw Foot clamping 16mm (6 holes) *

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, 1 x Backturning lathe Precision engineering PM 1-FZ Year of manufacture: 1995 In very good condition with a comprehensive range of accessories. Equipment: - Hand lever cross slide with Tripan quick-change system Nedeqyfpmjpfx Abwscw - Electric tailstock for drilling and threading - Collet chuck with draw-in collets - Coolant system Technical data: - Spindle bore: 23 mm - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Distance between centers: 160 mm - Largest turning diameter over bed: 220 mm Accessories: 39 x draw-in collets 359 E K 23 (1 - 20 mm, 0.5 mm increments) + 5 x square collets 10 x draw-in collets in tailstock 319 E K 12 (1 - 10 mm, 1 mm increments) 1 x Tripan quick-change tool holder with 1 cassette 1 x spindle in tailstock with MK 2 taper 1 x MK 2 drill chuck Röhm 1 - 10 mm 1 x simple clamping tool holder Operating manual (copy) Photos of the accessories will follow. Further accessories, such as collets with intermediate sleeves, are also available in stock. The machine can be inspected while powered on.

Condition: used, turning diameter over bed . mm turning diameter over slide rest 100 mm turning length . mm swing diameter 200 mm The tech. Data are manufacturer or operator information and therefore non- Ncedpfx Ajyqu S Uobwew binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2008, turning diameter: 275 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,345 mm, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, Equipment: documentation/manual, CNC Lathe with Y-axis, driven tools an 2nd spindle CNC Control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 / 366 mm Spindle bore diameter 80 mm Spindle speed 4000 R/min Spindle motor 18.5/15 Kw Movement X-axis 260 mm Ncsdsy Nyzgopfx Abwow Movement Y-axis +50 / -50 mm Movement Z-axis 1345 mm Movement W-axis (subspindle to mainspindle) 1275 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper BMT Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 6000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 1979, condition: not inspected (used), Feinbau lathe, automatic lathe PM1 HUC S -WKG 1269- Offered here is a lathe from the company Feinbau. Nedpfx Abohg Nl Eowocw Technical data: Manufacturer: Scherer-Feinbau Type: PM1-HUC-S Year of manufacture: 1979 Workpiece holder: hydraulic collet chuck Workpiece ejector: pneumatic cross slide: 100mm feed path longitudinal slide: 80mm feed path feed type: hydraulic type of control: relay control Spindeldrehzahlen: 1400/2000/2800 total power: 4kW weight: 1000kg space requirement: 2000 x 1500mm