Handling manipulator vacuum lifter

Schmalz 500 kg und 2000kg Hebeleistung

Condition: used, • Load capacity 350 kg Kodpfxexnvq Eo Aayedk • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test © Various control components • Price on request

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 50 l, color: red, overall weight: 2,600 kg, empty load weight: 2,500 kg, lifting power: 1,000 kg/m, lifting height: 3,310 mm, tire condition: 100 %, axle configuration: 2 axles, number of seats: 1, shovel volume: 0.4 m³, digging bucket width: 160 mm, Year of construction: 2025, load capacity: 980 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, differential lock, head guard, hydraulics, pallet forks, standard shovel, trailer coupling, The H&R 2210-T telehandler with the new 3-cylinder Perkins Turbo engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter. The new turbo engine is particularly economical, and with the 2-stage hydrostatic drive, it can reach speeds of approximately 16 km/h. Kodpfx Ajul Af Djayodk Thanks to the large steering angle of 42° and a small turning circle, it is ideal for use on even the smallest areas. The 2210T wheel loader with telehandler comes standard with a quick-change pallet fork and a standard bucket, so you can start working immediately. With the additional hydraulic control circuit, various attachments can be used for the yard loader. The telescopic boom gives the 2210-T an excellent reach. The electric gear on the joystick makes operating the H&R 2210T particularly convenient. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Advantages of the H&R 2210T Telehandler • Fully equipped • Efficient engine from Germany (Euro 5) • Extensively optimized in-house • Extendable telescopic boom • Heated comfort cab • Includes pallet forks • Includes standard 150 cm bucket • Joystick with float position and electric gear • Auxiliary hydraulics for front-mounted tools • Hydraulic oil cooler • Brake-inch pedal • Rearview camera with display • Rotating beacon • LED work lights front and rear • Wide tires 31 x 15.5-15 • Radio with MP3 and USB • Adjustable steering column and seat • Hour meter and fuel gauge • Trailer coupling • 1-year spare parts warranty • CE compliant according to the EU Machinery Directive Price Net: €24,975.00 VAT: €4,745.25 Gross: €29,720.25 Financing available! Optional 2-year warranty €590 TÜV road approval / operating permit for work machine €595 Transport to Germany and Austria upon request Technical specifications Engine: 3-cylinder Perkins Turbo Power: 25 HP Emissions class: Euro 5 Lifting capacity: 980 kg Lifting height: 3310 mm (bottom edge of standard pallet fork) Unloading height: 2796 mm (bottom edge of standard bucket tipped out) Lift time / lowering time: 4.0 / 3.5 seconds Wheelbase: 1.6 m Dimensions (L x W x H): 3710 x 1496 x 2340 mm Weight: 2430 kg Tires: 31 x 15.5 - 15 Accessories and spare parts are available from us. Please provide us with your telephone number when making inquiries!

Condition: new, carrying capacity 500 kg number of suction cups 6 suction cup dia. 215 mm Vacuum lifter VH 6-500 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer Kodpjq Sc Ausfx Aayedk (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 14 / 60 (LASER - Max 50) Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed (servo) system A1 / 15 Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt unit) 283.201 + 283.203 Glueing Unit (Thermofusion with Laser) Laser System LASERLINE Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 36 + 12 reels) Snipping (end-cutting) 08.42 (Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Kodpfxsi Hn Sre Aayjdk Rough Trimming unit 08.0555 HS/LS1 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0587 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) No. 2 Milling grooving units 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: new, weight max. in kg 1000 kg arm length 4000 mm height 3000 Unterkante Ausleger total column height 3790 mm swivelling range 270 Grad Total weight, approx. 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC Ksdpfexak Hxex Aaysdk as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: excellent (used), Viessmann Vitoplex 270kw low-temperature boiler Kdodpjwiqlcofx Aayek

Condition: like new (used), Year of construction: 2023, x-travel 4216,0 mm y-travel 2007,0 mm z-travel 305,0 mm control CNC table-size 4902,0 x 2134,0 mm max. workpiece weight 1465 kg / m² machine weight ab. 2500 kg total power requirement 30 kW dimensions of the machine ca. 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis Kdedpfx Ajyclvnsaysk - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel high-pressure pipes - MAXIEM direct pump M4050 - OMAX Intelli-MAX PC control software for MAXIEM - OMAX PC control software Intelli-MAX Premium - Cutting head technology based on the A-Jet 5-axis angular cutting head - Height sensor for the A-Jet 5-axis angle cutting head - Laser pointer as a positioning aid - Automatic desludging system MBM ASAS-ME - Compressed air injection for the MBM ASAS-ME automatic desludging system - Clamping and fastening set for sheet material and material holders - Collecting grid in the cutting basin - Sensors for automatic monitoring of the cutting process - Water treatment through water conditioning incl. water analysis - Omni-Start drilling aid (Vacuum Assist) for brittle and laminated materials

Condition: good (used), Year of construction: 1972, Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -Manufacturer: Lödige, scissor lift table -Load capacity: 1000 kg -Platform: 3000 x 2000 mm -Dimension retracted: height 390 mm Kdsdpomghawsfx Aaysk -Dimension extended: height 2000 mm -Hydraulic unit: Bauknecht 3 kW / 150 bar -Transport dimensions: 3000/2000/H390 mm -Own weight: 2100 kg

Condition: excellent (used), Viessmann Vitoplex 225kW boiler, gas or oil burner possible Ksdpfx Aaew Ey Dmoyedk

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm Kdsdpfx Aasl Nbqcjyjk height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition