Cold forming press - rotary swaging machines

SCHMID T 400

Condition: used, Year of construction: 1997, SCHMID T3-400 3 – TECHNICAL DATA Manufacturer: SCHMID Manufacturer location: Rapperswil, Switzerland Model / Type: T3-400 3 Machine No.: T3-400 3 Year of manufacture: 1997 Country of manufacture: Switzerland Machine type: Hydraulic nutation / orbital forming press (Taumelpresse) Dcjdpfxszvnr Ro Ai Son CE marked: Yes PRESS DATA Nominal press force: 4,000 kN Equivalent press force: approx. 408 metric tons Operation: Hydraulic Working direction: Vertical Press construction: Four-column press Number of columns: 4 Forming process: Nutation / orbital forming Tool arrangement: Upper and lower tooling Operation mode: Automatic / PLC controlled HYDRAULIC SYSTEM These specifications are confirmed directly by the machine plate in your new photo: Press force: 4,000 kN Hydraulic oil capacity: 1,500 litres Lubricating oil capacity: 350 litres Maximum hydraulic pressure: 250 bar Maximum lubrication pressure: 315 bar ELECTRICAL DATA From the other T3-400 nameplate you sent earlier: Connection voltage: 3 × 400 V Frequency: 50 Hz Connected load: 170 kW Minimum mains fuse: 400 A Control voltage: 230 V AC / 24 V DC Lighting voltage: 230 V AC Electrical schematic No.: 21.10.4060 CONTROL & ELECTRICAL EQUIPMENT Control: Siemens PLC PLC system: Siemens SIMATIC Power supply: Siemens SITOP Operator panel: Machine-mounted control panel Electrical cabinet: Integrated/separate machine electrical cabinet Automatic operation: Yes Parameter-controlled operation: Yes Emergency stop: Yes MACHINE / WORKING AREA Press frame: Four-column construction Working area: Enclosed Lower tooling: Circular die/tool mounting arrangement Upper tooling: Circular tool arrangement Automatic workpiece handling: Integrated Hydraulic lubrication: Yes Hydraulic power unit: Integrated Pressure monitoring: Yes

Condition: used, Lasko hammer KGK 063 Impact force 630 mkp Dcedpfx Aisu Eb Nij Sen Stroke max. 630 mm Bear weight 630kp Top pressure - filling pressure 5 bar

Condition: ready for operation (used), Year of construction: 1997, SCHMID T3-400 2 Nutation Press / Taumelpresse Manufacturer: SCHMID Manufacturer location: Rapperswil, Switzerland Model / Type: T3-400 2 Machine No.: T3-400 2 / MK20166 Year of manufacture: 1997 Country of manufacture: Switzerland Machine type: Nutation press / Taumelpresse Control: Siemens PLC Operation: Automatic / PLC controlled Technical Data Press type: Nutation press / orbital forming press Dcedozvnqtepfx Ai Sen Nominal press capacity: 400 t / approx. 4,000 kN * Number of pressing stations: 2 / double station configuration * Working direction: Vertical Press construction: Four-column press Tool / die arrangement: Upper and lower tooling Operation: Hydraulic Machine cycle: Automatic / programmable *The 400 t capacity and interpretation of “2” as the machine configuration are consistent with the T3-400 designation, but I would not advertise those two as manufacturer-confirmed specifications unless you have the original technical manual. Control & Electrical Equipment Control system: Siemens PLC PLC hardware: Siemens SIMATIC Power supply module: Siemens SITOP PSU8200 Operator control: Machine-mounted control panel Electrical cabinet: Separate integrated electrical cabinet Electrical Data Connection voltage: 3 × 400 V Frequency: 50 Hz Total connected load: 170 kW Minimum mains fuse: 400 A Control voltage: 230 V AC / 24 V DC Lighting voltage: 230 V AC Electrical schematic No.: 21.10.4060 These values are directly readable from the SCHMID machine plate in your photo. Press / Working Area Press frame: Four-column construction Number of columns: 4 Lower tool table: Circular tooling / die mounting arrangement Upper tool holder: Circular tooling arrangement Machine enclosure: Fully enclosed working area Access: Front access door Automatic workpiece handling: Integrated Hydraulic lubrication system: Yes Production Counter Total strokes displayed: 19,304,255 strokes

Year of construction: 2018, condition: excellent (used), Used Fagor 2500ton hydraulic h frame press for sale FAGOR H4-2500-5000-3000 2500 ton YOM: 2018 Moving Bolster Table Size: 5000 x 2500 mm Die Cushion in Table: 600 to stroke: 400 mm Die Cushion in Ram: 350 to stroke: 200 mm Manufacturer: Model: Controls: PLC SIEMENS Simatic TouchControl Manufact. year: 2018 Press Design frame design H-frame Openings in uprights yes Moving bolster yes Press forces Total force (nominal) 2500 to Press Table Clamping surface (left-right) 5000 mm Clamping surface (front-back) 3000 mm Table height over floor 820 mm Ram Clamping surface (left-right) 5000 mm Clamping surface (front-back) 3000 mm Stroke 1800 mm Ram (hydraulic press) Number of main-cylinders 4 Approximation velocity max. 490 mm/s Working velocity max. 17 mm/s Return velocity max. 250 mm/s Cushion in ram Dedpeifkldjfx Ai Secn Force of cushion 350 to Stroke 200 mm Clamping surface (left-right) 4300 mm clamping surface (front-back) 2500 mm working principle hydraulical regulated yes page 2 of 2, Stock No.: 7-46523 Die Cushion (table cushion) force of cushion 600 to stroke 400 mm clamping surface (left-right) 4320 mm clamping surface (front-back) 2700 mm working principle hydraulical regulated yes Tool Assembly Dimensions Distance between columns (H-frame) 5050 mm Tool Assembly Dimensions Distance table – ram max. 2700 mm Electrical specifications Total power consumption 565 kW Mains voltage 400 V Mains frequency 50 Hz Dimensions / weights Height above floor level 10750 mm total weight approx. 500000 kg Light barrier yes Hydraulic overload protection yes This FAGOR machine was manufactured in 2018 and commissioned in 2019 and was only used sporadically after that. The condition can be described as new. Description of condition – Hydraulic press equipped with: – front moving bolster, – draw cushion in the table – cushion inside the ram, – 16 hydraulic tool clamping units, – two hydraulic cylinders for ” out of center pressure ” compensation – Siemens HMI touch control, – ideal for tryout of tools. – max. rapid speed of ram 490 mm/sec – ram and table deflection accuracy 0,125 mm/m.

Condition: used, Year of construction: 1991, pressing force: 650 t, pressure:650 t passage width:920 mm stroke:1750 mm weight of the machine ca.:ca. 47 t Table area:2000 x 1500 mm Dcodefhmuvopfx Ai Sen ram surface:2000 x 1500 mm Daylight Opening:2100 mm Hydraulic:203 bar closing speed:500 mm/min pressing speed:0,5 - 10,4 mm/sec opening speed:250 mm/sec Solve speed:0,5 - 66,4 mm/sec Return Capacity:150 t total power requirement:75 kW Measurements (approx.):4,4 x 2,5 x 7,5 m

Year of construction: 2005, condition: like new (used), Used Kojima 2200ton hydraulic H frame press for sale Machine Type Hydraulic Press Make Kojima Dcedpfx Aijlqxg Ho Sjn Capacity 2200 tons Stroke 1200 mm Daylight 1800 mm Slide 3200 x 1800 mm Moving Bolster 3200 x 1900 mm Moving Bolster Stroke 2500 mm Moving Bolster Speed 100 mm/sec Die Cushion 100 – 500 ton Cushion Stroke 450 mm Cushion Pad 2000 x 1275 mm Cushion Pin 50 mm dia Slide descending speed 235 mm/sec Hydraulic Tank 3200 litre

Condition: new, Year of construction: 2026, load capacity: 10,000 kg, Column lifting and rotating device, 10 tons lifting capacity, available as a set or individually. Driven on 2 sides. The machine is offered as a set for synchronous operation or individually. Dcjdpfx Aijwtq Dto Ssn Protec rotating device / positioner Syncrolift. Double column, hand-held remote control, wireless and manual. Column adjustment, 2x electrically adjustable (at extra cost). Lifting capacity 10,000 kg, 360°. Minimum working height: 800 mm. Maximum working height: 1700 mm. Speed: 0.5 RPM. Diameter of clamping plate: 900 mm. Rotating movement: 2 x 2.2 kW. Torque: 18950 Nm. The machine is also offered individually as a mono model (more affordable). Optional with a universal joint flange (cardan flange).

Condition: ready for operation (used), VTL MORANDO KL 12 CNC Fagor 8040 Faceplate diameter: 1200 mm Swing diameter: 1400 mm Turning height: 1080 mm Dodpfetvv Sqjx Ai Sscn Main motor: 40 kW Total power requirement: 50 kW Weight of the machine ca.: 18 t Movie underpower available

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, overall weight: 1,20,000 kg, total height: 5,600 mm, pressing force: 1,250 t, air pressure: 6 bar, distance between side stands: 1,200 mm, distance between stands: 1,400 mm, stroke length: 500 mm, table length: 1,850 mm, table width: 1,600 mm, Straight-sided eccentric press ERFURT type PKZe 1250 Superb working condition, after full, professional overhaul. After - newer used. Specification: Capacity: 1250 ton force Slide stroke: 500 mm Slide adjustment: 215 mm Maximum shut height between bolster plate and slide (stroke down, adjustment up): 860 mm Bed area (width x depth): 1600x1850 Slide area (width x depth): 1300x1400 mm Opening in the bed (width x depth): 1100x1100 mm Main motor rating: 90 kW at 1478 RPM Ram adjusting motor rate: 7.5 kW at 1450 RPM Number of single strokes: 8 min-1 Cushion capacity: 200 ton force Cushion stroke: 200 mm Height above floor: 7900 mm Press weight: 130 000 kg. Dcjdpfx Aijubyrxo Ssn

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, pressing force: 500 t, stroke length: 400 mm, table width: 1,600 mm, table length: 900 mm, year of last overhaul: 2017, Equipment: safety light barrier, Dieffenbacher PO 500A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Dieffenbacher PO 500A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Dcsdev E Nlzopfx Ai Ssn Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.