Steel rod straightening

Schneider

Condition: good (used), Year of construction: 1990, Top-mounted control panel, electric spindle height adjustment, 30 mm spindle, electric tilt 45°, 6 speeds, motor power 7 kW, cast iron fence jaws, large table 2500 mm, Haffner 4-roller feed with 8 speeds, dimensions 2500 x 1300 mm, weight 1000 kg, good condition. Price ex location. Transport available at additional cost! Ihsdpfoyaq U Dox Adwst

Condition: new, sheet length: 1050sheet thickness: 1,0weight approx.: 0,185messurements (LxWxH): 1,4x0,7x1,12 Ihjded Eqrpspfx Adwet

Year of construction: 2022, condition: used, Used machine Year of manufacture: 2022 Features and technical specifications: - V-belt driven 2-cylinder unit with two-stage compression for 10 bar pressure increases performance and ensures high efficiency - Tank with baked-on internal coating - Supplied as standard with all fittings: solenoid valve or pressure switch with unloader valve for fully automatic operation, motor protection, safety valve, manometer, non-return valve, condensate drain valve and shut-off valve - Equipped as standard with rubber anti-vibration mounts - With refrigeration dryer and bypass line - For compressors with 4 kW motor, the regulations of the local electricity supplier must be observed - Large fan flywheel for optimal cooling - Easily accessible condensate drain under the tank, also suitable for simple connection of an Ecomat condensate separator - High-performance refrigeration dryer with Super-Dry Technology and ECO shut-off - For all compressors and units from 5.5 kW upwards, starting via an automatic star-delta switch is mandatory. This switch is not included in the scope of supply, but the start-up relief is included - Pressure: 10 bar - Intake capacity: 660 l/min - Speed: 1025 rpm - Tank volume: 270 l - Weight: 206 kg - Noise level: 78 dB(A) - Voltage: 400 Volts/50 Hz (three-phase) - Effective free air delivery: 520 l/min - Air outlet: 3/4" internal thread - Drive power: 4.0 kW - Drive type: V-belt Ijdpfx Ajyamc Rsdweht - Application: Professional - Installation type: Stationary - Tank size (Litres): 250 - 300 - Tank volume (l): 270 - Effective free air delivery (l/min): 520 - Power rating (kW): 4.0 - Soundproofed: No - Voltage (V): 400 V - Starting method: Direct-on-line (DOL) - Dryer type: Refrigeration dryer - Compression type: Two-stage - Oil-free: No Dimensions: 945 x 705 x 1800 mm Weight: approx. 200 kg Availability: short-term Location: 63934 Röllbach

Condition: excellent (used), CATALOG NUMBER 7617 TECHNICAL DATA - Wheel diameter: 610 mm Ihjdpfxowbdnuj Adwjt - Table dimensions: 670x640 mm - Table tilts, angle adjustable - Motor: 2.2 kW - Brake - Max. cutting height: 380 mm - Throat distance (blade to frame): 550 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 1150x800x2200 mm - Weight: 360 kg ADVANTAGES – German-made – Not repainted – In very good condition – Used saw Net price: 7900 PLN Net price: 1880 EUR based on a rate of 4.2 EUR (Prices may fluctuate with significant exchange rate changes)

Condition: good (used), Year of construction: 2019, functionality: fully functional, inner dimension length: 7,400 mm, inner dimension width: 1,600 mm, inner dimension height: 2,200 mm, Powder Coating – Complete Production Line for Large Components – Including Curing Oven 7,400 mm, Year 2018-2021 Complete powder coating system for large components, including: • OVEN (1): Vismont KWP-440/114 – Interior length: 7,400 mm – Year 2018 • OVEN (2): Libra SLET40-25-20 – Year 2020 • POWDER BOOTH: Vismont KNP-1500/06 – Year 2018 • WASHING SYSTEM: Libra MR35-21-17 – Year 2021 • MANUAL WASHING SYSTEM: Libra MR42 – Year 2020 • AIR FILTRATION UNIT: Kemper 390600 – Year 2016 • MANUAL POWDER COATING SYSTEM: Nordson Encore HD MPS – Year 2021 • SCREW COMPRESSOR: Kaeser SM 15 – Year 2013 • TRAVERSING CONVEYOR SYSTEM • FORKLIFT TRUCK: Hyundai 30L-7A – Year 2012 All equipment is operational and fully functional. Ijdpfsxrd A Dsx Adweht Price: Depending on partial or complete purchase.

Condition: used, Year of construction: 2000, grinding length 600 mm grinding width 300 mm magnetic clamping plate 600x250 mm Iedsw Hg Uzepfx Adwoht wheel diameter 220-300 mm weight 2200 kg

Condition: excellent (used), Spindle moulder with sliding table and pneumatic clamp, including HolzHer ETZ feed unit. 4 feed speeds: 2 – 12 m/min. 3 new feed rollers. Table size: 1000 mm wide, 930 mm deep. 30 mm spindle. Heavy-duty construction. Milling fence with fine adjustment. 4.5 kW. Weight approx. 600 kg. Iedpfxsudwlzj Adwoht

Condition: excellent (used), Year of construction: 2020, We offer: Deburring machine Manufacturer: Viet Type: SV3-4.3 RVXR Year of manufacture: 2020 Technical specifications and features: - Sanding belt change on the left side of the machine. - Tool set - Digital thickness display - Material too thick at the inlet - Electro-pneumatic oscillation control - Air filter with condensate separator and automatic drain - Maintenance-free pneumatics - Pneumatic lifting and lowering when switching the units on and off - Machine with head adjustment (fixed working height 900 mm) - Lifting system on 4 columns (spindle) with chain drive - Table extensions at the front and rear, each with 1 roller - Industry 4.0 (LAN) package with LAN connection to the network - Working width: 1350 mm - Machine with movable head - Centesimal lifting system with inverter - Useful working height 160 mm - LED lighting inside the machine - Electronic belt control for the longitudinal units - Calibration sanding unit with sanding roller diameter 190 mm, belt length 2620 mm - Electromechanical grit set - The speed of the sanding unit can be adjusted using the frequency converter The sanding belt can be adjusted. - V-Spin unit with 15 disc sanding system / diameter 80 mm The V-Spin unit consists of 15 disc brushes arranged in a row and moving in opposite directions. The combination of these two movements makes the V-Spin unit suitable for rounding sharp edges and removing slag or oxides. - 16 backing pads for V-Spin units, diameter 80 mm Scotchbrite + 80 grit abrasive - 16 backing pads for V-Spin units, diameter 80 mm Tampico + 80 grit abrasive - X-Spin unit / sanding system with 15 discs / diameter 123 mm The group consists of 5 rotating heads with 3 pads of rotating sanding brushes (diameter 123 mm) inserted inside each head. - Oscillating Scotch-Brite brush - Linear cleaning systems - Conveyor belt Feed speed 1.1 kW (1.5 HP) Speed 0.5-7 m/min Conveyor belt made of HYPALON rubber, heat- and oil-resistant, hardness 60 SH with a smooth surface - Belt cleaning fan for the conveyor belt including suction - IPC MONITOR 15" touchscreen control for operating the machine, up to a maximum of 10 processing units. The control manages the following processes: - Start sequence of the selected drive motors - Storage of 1,000 processing programs - Automatic positioning of the working thickness regulator Ijdpfjv Hxrgjx Adwjht - Acoustic and visual indicator when the machine starts up - Operating hour meter - Automatic control of the feed speed depending on the processing performance (expressed in square meters). This allows for a longer service life of the sanding belt based on the statistics. The machine is in very good condition and is used for 2 Euro pallets. New sanding belts included. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in technical data and information, as well as prior sale.

Condition: good (used), Carpentry longitudinal / rip saw Schneider L280. Motor power 11 kW. Saw blade diameter 750 mm. Cutting height approx. 280 mm. Automatic tilting with digital display. Stepless height adjustment. Automatic feed – speed adjustable via potentiometer. Roller conveyor on the right 2500 mm with aluminum fence profile 3000 mm. Function tested. For details and condition, see pictures. Ijdpfx Adoyab Tkewjht

Condition: good (used), Zimmer crosscut/trimming saw Schneider KSD Saw blade diameter 750 mm Cutting height approx. 280 mm Swivels 60 degrees to the right and left – readable via digital display Automatic clamping hood for short timber Motor power 7 kW Automatic blade rise via two-hand operation Roller conveyor on both right and left sides, each approx. 6000 mm For details and condition, see pictures Ihedpeyab S Hofx Adwjt

Condition: new, Year of construction: 2025, DM1100 Z – NEW DESIGN – at €29,800-- Deburring up to 1100mm width. The DM1100 Z refines and deburrs light metal sheets cut by laser, punching, or shearing. This machine is equipped with a single wide-belt station, which can be used for deburring parts ranging from 50×50 mm in size up to 1100 mm in width. The DM1100 Z is also suitable for surface finishing and can operate with both standard abrasive paper and non-woven/Scotch belts. Iodpsimdmtofx Adwsht With an additional table, the new DM1100 Z can be combined with an existing DM1100 C edge-rounding machine. We also offer a part return system for this machine.

Condition: like new (used), operating hours: 349 h, functionality: fully functional, input voltage: 400 V, input current: 1,037 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP00, year of last overhaul: 2026, continuous power: 630 kW (856.56 HP), Equipment: type plate available, Exact model designation: Schneider MX eco 4V630 Output power and output current: 630kW | 1188A ME4C63AAA ° With test certificate! ° Only 349 motor operating hours - according to the manufacturer, over 100,000 possible! ° Easy operation thanks to the integrated control panel ° Quick parameterization possible thanks to the quick menu ° Original operating instructions for commissioning included ° 2 additional control cabinets with various components tailored to the inverter included (buying drive without extra components possible) The following additional components are installed (see pictures): ° 2 pcs. RFI 480/600-TN (RFI filters) ° 2 pcs. NH fuse switch disconnectors, size 3 | I = 630A ° 2 pcs. ABB AF580-30 | I = 800A (Power Contactor) ° 2 pcs. ABB AG09083735 (Circuit Breaker) ° SMF 480/1200 | 1200A (Sine Wave Motor Filter) ° 2 pcs. ABB AF750-30 | I = 1050A (Power Contactor) Only 1 unit left in stock! Ihjdpfx Ajx U Dvrodwjt This item has been reset to factory settings and is therefore in its original condition as delivered by the manufacturer. Please refer to the original product images for the item's visual condition. Fully functional and ready for immediate use.

Condition: good (used), Year of construction: 2000, machine/vehicle number: M-0510-008-04/10-00, Unloader Schneider Senator RS SR0059, year of manufacture 2000, machine number M-0510-008-04/10-00, in good condition, available immediately If you are interested, we will be happy to inform you about other machines in our company. You are welcome to view the machines at our premises by prior appointment. Ihsdpfx Ajtukkvodwjt

Condition: like new (used), Year of construction: 2018, operating hours: 30 h, functionality: fully functional, machine/vehicle number: 6203065, overall weight: 3,700 kg, input frequency: 50 Hz, input current: 77 A, input voltage: 400 V, Brand new machine, not used after testing. Check the photos and additional info. If you have more questions - let us know! Ihsdpev Txuuefx Adwjt

Condition: good (used), Year of construction: 2005, machine/vehicle number: M-078E-018-11/20-05E, Schneider Senator 078E-Line paper cutting machine, serial number: M-078E-018-11/20-05E, built in 2005, with air table, side table, light barriers, and program control, in good condition, available immediately. If you are interested, we would be happy to inform you about other machines in our facility. You are welcome to view the machines in our facility by appointment. Ihedpfx Adowivimowst