Autoclave

SCHOLZ internal D=1650 mm, L=9,5 m

Year of construction: 2019, condition: new, The subject of sale are the Steritech AV20 autoclaves. Steritech Company Fpjdsuabr Dspfx Adajd Year of production 2019 / New Type AV 20 Capacity 6 trolleys Working temperature 158 degrees Celsius Working pressure 5 bar Control Siemens Simatic

Condition: used, Year of construction: 2011, functionality: fully functional, Quick steam generator set - Jumag consisting of 3 quick steam generators including water softening system and chemical dosing system 1x Jumag DG 360 Volume: 60L Operating pressure: 13 bar Fpodpfswn H Auox Adaed Max. heat output: 245 kW Steam output: 360 kg/h Gas burner: Weishaupt WG30N/1-C-ZM-LN Year: 2011 2x Jumag DG 320 Volume: 49L Operating pressure: 13 bar Max. heat output: 200 kW Steam output: 320 kg/h Gas burner: Weishaupt WG30N/1-C Year: 2002

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, For sale: 500L EasyBrau brewhouse (Model SCB500/2, built 2016) – premium-quality Italian-built commercial brewing system designed for consistent output, efficient CIP cleaning, and user-friendly operation. Suitable for brewing up to 10HL per day. Fully refurbished at EasyBrau factory, completed 03-2025. Steam condenser upgraded in 2025 (enhanced steam/fume extraction and ventilation). Brewhouse configuration (3-vessel system): Consists of three primary tanks linked by a dedicated hydraulic transfer system: - Mash / Kettle / Whirlpool Tun: Features steam heating, built-in agitator, top manway, and tangential whirlpool inlet for effective trub removal. - Lauter Tun: Optimized for efficient wort separation with a rotating rake system, top manway, and side door for CIP and spent grain removal. - Hot Water Tank: Positioned below the lauter tun for space-saving, recovery of hot water for subsequent brews and cleaning cycles. Key systems & features: - Steam-heated brewhouse (rapid heating and stable boiling) - Integrated hydraulic transfer system for dense mash and wort transfer - PLC control panel with e-stop, pump/agitator controls, lighting, safety interlocks, and speed regulation - Connects to plate heat exchanger for rapid wort cooling pre-fermentation - Designed for CIP circulation cleaning (vessels, piping, heat exchanger) - CE-marked industrial equipment Included Extras: Ultrafilter 20” High Flow cartridge filter housing, high-capacity beverage/process filtration, low pressure loss, inline design for breweries, soft drinks, water, and hygienic processing. Includes 12 x Ultrafilter PF-UF High Flow Pleated Filter Cartridge 3µm. 8 x 500L Stainless Steel Fermentation Tanks – supplied as complete sets with all key fittings/accessories for professional fermentation. Ideal for small breweries, pilot facilities, or expanding cellar capacity. - 500L Fermenter (top TC cap) - Double jacket - Carbonation stone - Temperature gauge - Pressure/vacuum (spunding) valve (0.2–2.2 bar) - Sight glass - Glycol solenoid valve 2 x 10HL Fermentation Tanks: - Sight glass - Glycol solenoid valve Steam Generator – Ditta Arturo Mazzi & F. (Italy) – fully serviced 10-2025 Year: 2010 Model: AB Serial/Fabric No.: 4017 Volume: 53.2L Max. working pressure: 5.5 bar Steam temp: 163°C Steam output: 50 kg/h KegLand Cannular Fully Automatic – Single Lane Canning Line (KL25164): Compact, brewery-grade automatic canning line designed for fast, reliable double seaming with minimal operator intervention – ideal for taprooms, microbreweries, seasonal batches, or as a backup/machine for mobile canning. - Fully automatic fill and seam cycle - Fitted with B64 chuck for consistent seam integrity - Integrated flow meter for accurate filling - CO₂ purge inlet helps reduce dissolved oxygen - Sanitiser spray inlet Fedpjx U Tf Aefx Adajpd - Automatic lid dispenser - Up to 700 cans/hour capacity If you have any questions, please do not hesitate to contact us. As the system remains installed, full demonstrations under operating conditions are possible.

Condition: used, Year of construction: 1993, operating hours: 48,000 h, Self-stacking spiral freezer belt, Frigoscandia FRIGoBELT - replaced in 2010 Link height: 80mm / max. product height: 65mm / Net belt width: 580mm / Belt width between infeed covers; 535mm / belt stack with 24 tiers / Belt mesh: M13-1.5 / 24 tiers (possible to put more tiers) Layout N-S CCR Evaporators SS/AL / number of coils: 1 / number of fans: 2 Standard -replaced in 2011 CIP belt cleaning system Enclosure: W/W (white inside and white outside) - replaced in 2010 Fodpovf Iuzofx Adaepd Chain, balls and plastic guides replaced in 2017 Refrigerant: ammonia / refrigeration: R717 Max total heat removal 252 kW/h ProCare service till 2018 Documentation available Stop running in 2018 Possibility of dismantling and preparation for transport for an additional fee

Condition: used, Year of construction: 1990, Technical details: Fpodju Ibvuepfx Adaed tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm dimension machine xH: 5,1 x 0,7 x 2,0 m Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Operation via control panel with monitor Accessories: -div. bending tools for tube Ø 25mm -12 div. collets -div. auxiliary and clamping devices *

Condition: excellent (used), Perfectly preserved six-spindle INDEX MS 25 automatic lathe with six transverse and six longitudinal tool guides. The price is negotiable depending on the selected additional equipment: clamping pods, tools, chip conveyor, etc. Fsdjqhkukspfx Adaepd The machine is still in production. Viewing possible by arrangement.

Condition: ready for operation (used), With hydraulic pump. Fpedjhw E D Sepfx Adaed

Year of construction: 2013, condition: ready for operation (used), Connected load: 4kW, weight: 1t. Fsdpfxjhlp Efe Adaspd

Condition: used, Year of construction: 2003, pressing force: 260 t, Hydraulic press brake Manufacturer: HACO Type: ERMS 60-260 Year of manufacture: 2003 Technical specifications Manufacturer: HACO Type: ERMS 60-260 Year of manufacture: 2003 Pressure capacity: 260 t Bending length: 6000 mm Dimensions (L x W x H): approx. L 7.0 x W 2.0 x H 3.70 m Weight: approx. 31 t Equipment • ATS 560 digital control system • Fiessler light barrier at the front • Centrally adjustable crowning • Amada tool system • Controlled axes: Y1, Y2, X • Manual R-axis • 1 set of upper tools • 1 set of lower tools Fpedpfowkttrox Adaed All information is subject to change. A demonstration is available at any time in the exhibition hall.

Condition: like new (used), Through feed double end trimmer saws. 2x 3kW saw motors. Feed motor with variator. 300mm to 3100mm end trimming capacity. Suitable for use with a moulder infeed or similar. Fpodpfjif N Sxsx Adaed