Used Autoclave for sale (112)

Year of construction: 2009, condition: used, Zirbus Stainless Steel Autoclave Chamber volume 758 litres Dimensions 2100mm l x 980mm W x 1950mm H Stand-alone autoclave with vertical door are powerful Hodpewuurdefx Adwsfb Compact and economical to use Due to the angular chamber shape, large loading capacities can be realized with comparatively small external dimensions. The optimum solution for your sterilization task.

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Stergaz autoclave Year of production: 2007 Technical condition: very good Autoclave + two tanks Technical data: - design pressure: 10 bar - design temperature: 40C - minimum / maximum temperature: 0/40 degrees Celsius - welded joint coefficient z = 0.7 - capacity: V= 84 800 L - material St 41K Hfjdpfx Ajvu Ibyjdwjb - casing thickness: 24mm - crown 26mm - bottom thickness: 26mm - vacuum: 90% - medium: water + impregnant

Condition: excellent (used), Year of construction: 2014, Autoclave Systec VX-100. The device has only undergone testing phases. Fully automatic, microprocessor-controlled system covering 12 programs: 1-3 Solids 4-5 Waste destruction bags 6-7 Liquid waste 8-11 Liquid media 12 Cleaning • Integrated separate steam generator (no heating elements in the sterilization chamber) • Innovative safety ring closure system with lip seal • Steam temperature and pressure up to 140°C / 4 bar absolute pressure, extendable to 150°C / 5 bar absolute pressure • Thermal lock: door locking system controlled by pressure and media temperature according to pressure vessel regulations • Flexible PT-100 temperature sensor for reference vessel • Sterilization time controlled by media temperature • Electronic pressure transducer for monitoring pressure and temperature • “Autofill” – automatic dosing of demineralized water for steam generation • Special waste destruction program with pulsed heating for better ventilation of waste bags • Timer start / programmable delayed start • Outlet steam condensation, water-cooled, thermostatically controlled • Common manifold connection for all outputs • Drain valve • Base plate for tanks, baskets, etc. • Validation port • RS 232 interface for external data transfer • Prepared for subsequent printer installation • Prepared for subsequent fast cooling installation • Prepared for subsequent vacuum system installation • Prepared for subsequent drying installation • Safety switch for low water level • Safety switch for overtemperature Options installed in the autoclave: Autoclave: VX-100 (Y-1100), ch+w, w, p, s, K, SAPL ch – cooling water cooling – ch+w vacuum – p Hodpjx R Emkjfx Adwjfb drying – s compressor – k SAPL – system.

Year of construction: 2025, operating hours: 260 h, condition: like new (used), functionality: fully functional, The autoclave material is Q345R, outside with special insulation - rockwool 80 mm thickness. The heating way is electric air heating, in the autoclave there are heating pipes, distribute in the left and right of the autoclave (energy and electric saving), heating power is about 36 KW totally. Fan inside the tank with the electrical engine outside of the autoclave (water cooled) Design vacuum function, 14 vacuum ports equipped with the vacuum pipes and related fittings and vacuum gauges. The tank is equipped with a frame style inside trolley. Specifications: - 2000 mm internal working length and 1200  mm internal working diameter - door with the locking system (manually and piston controlled by the control unit  - the second check for the closed door and opening door) - Working pressure max. 8 bar (tested for the 13 Bar) - Adjustable AIR - max. working temperature 210 °C - Air volume 2770 litres - weight 1395 KG - water cooling system after the process is done to cool down temperature - 2 ports for the valve for the Pressurizing - 2 port for the valves for the de- pressurizing - 1 port for the temperature controller (PT 100) - 1 port for the maximum temperature controller - 1 port for the analog manometer - 1 port for the electric sensor manometer - 1 port for the vacuum sensor The autoclave design safety interlocking device, has been passed the identification by technician supervision and the certificate is held. The control unit and the electrical system is also tested and the certificate is given. All functions of the autoclave are displayed and controlled by the control unit on the monitor. Hedpfx Adex Sctdjwofb The unit is fully programable for the different temperature and pressure rising in time. It also gives the report to your PC of the process after the process is done if you need.

Year of construction: 1992, condition: used, Manufacturer : De lama Model: DLST/L Class 100 Year : 1992 Type: Dry heat oven for sterilisation and depyrogenation.   Volume: 1 m3 Materials : Polished stainless steel - Sterilisation (160 - 180°C): Reduction of micro-organisms and their by-products by up to 12 log - Depyrogenation (220-250°C): Destruction of pyrogens and endotoxins inside materials - Horizontal laminar flow - Double door (new) - Electric heating - 2 trolleys - Olympia/EXP3: Control, regulation, management and recording system with high-speed processor. Possibility of designing the oven to withstand operating temperatures of up to 300°C in continuous service, thanks to the use of HEPA filters with a special sealant. Main applications : - empty glassware (e.g. vials, ampoules, bottles) - stainless steel equipment (e.g. trays, machine parts) - moisture-sensitive materials - basic thermostable pharmaceutical products and chemical compounds Hfodpfx Aox Rz N Uodwjb - non-aqueous liquids (e.g. oils, glycerines, etc.)

Condition: new, Year of construction: 2019, functionality: fully functional, total length: 6,000 mm, total width: 1,800 mm, Industrial vacuum and pressure impregnation plant designed for efficient and uniform wood treatment. Hedpfxsx Sdpts Adwofb The T10 features a Ø1,800 mm × 6,000 mm autoclave, handling 8–9 m³ of timber per charge, with operating pressure up to 15 bar (abs). The plant is fully automated via PLC, enabling precise control of vacuum, pressure, time and preservative absorption. Built to EN 13445 standards with third-party inspection, it is suitable for modern chrome- and arsenic-free preservatives. Complete system includes pressure vessel, working tank, vacuum and pressure pumps, cleaning system, trolley loading system and safety features. Ideal for sawmills and industrial wood processors seeking reliable, high-quality impregnation performance. Technical specifications available on request.

Condition: excellent (used), Year of construction: 2010, operating hours: 553 h, overall weight: 210 kg, total length: 1,055 mm, total width: 850 mm, total height: 730 mm, Laboratory autoclave: Systec, Model: DE-150 Volume: 158L Year of manufacture: 2010 Only 553 operating cycles External dimensions L/W/H: 1055/850/730 mm Weight: approx. 210 kg Hedpox Dr Ekjfx Adwefb

Condition: like new (used), functionality: fully functional, Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Rotary autoclaves: These are used to sterilize products that present greater difficulties in heat transmission. Examples include vegetables in grains, grated or diced, and beverages such as milkshakes, teas, coffees, or evaporated milk. In this type, the basket rotates inside the autoclave, stirring the contents and preventing the pieces closest to the sides of the vessel from roasting. Hfjdpfjx Tilijx Adwob Distance between rollers:

Condition: like new (used), Year of construction: 2017, KORIMAT KA 160 – Compact, versatile, indispensable. Hedox N S Ekjpfx Adwefb Completely overhauled with a 6-month parts warranty. Year of manufacture: 2017. Ideal for beginners and perfectly suited for spaces with limited room: The KORIMAT KA 160 stands out for its maximum efficiency in a minimal footprint. This handy all-rounder offers much more than just sterilization – as a compact kettle, it brews and cooks delicious specialties. Whether it's perfectly cooked cold cuts, scalded sausages, or classic sterilization, the KA 160 ensures every application is simple and reliable. Experience uncompromising quality and flexibility – for outstanding taste and maximum productivity. Performance / Power requirement: 9 kW / 400 V / 50/60 Hz Heating type: Electric Kettle material: Stainless steel V2A Kettle capacity: 120 liters Maximum operating overpressure: 2.5 bar Minimum circuit protection: 3 x 16 A Dimensions (W x D x H) in mm: approx. 800 x 1115 x 1900

Condition: used, This Listing is for a refurbished Laboklav 80 MV Autoclave Incl. commissioning in UK. (outside the UK is possible also, please request and we will try and accomodate) Vertical device, 80l, can be changed to horizontal version (stand required) Sterilisation temp. 98-135°C Hedpexx Aqajfx Adwjfb Outer dimensions (w x h x d in mm) 740 x 915 x 600 chamber dimensions (Ø x d in mm) 410 x 610 Steam generator 6,6kW Vacuum incl. pre- and postvacuum, heating during postvacuum Fast re-cooling with double jacket 3N 400V, 50 HZ, 16A, CEE plug Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status. Test runs to ensure and check functionality

Condition: good (used), Year of construction: 2011, functionality: fully functional, total width: 2,250 mm, total length: 11,000 mm, total height: 2,550 mm, Autoclave for rotary retreading SCHOLZ year 2011, in good condition, dismantled and stored type of heating: steam (steam generator not included) length: approx. 11000 mm width: approx. 2250 mm Hfsdpfstph H Sox Adweb height: approx. 2550 mm total weight: approx. 7000 kg internal diameter: 1650 mm cylindrical length: 9500 mm usable length: 24 tires

Year of construction: 1983, condition: used, Pressure vessel for sterilisation using moist heat in a batch process. The autoclave works in the same way as a pressure cooker and allows all microorganisms to be completely destroyed. Additional title: steam pressure steriliser Volume of the pressure chamber: 223 l Max. working overpressure: 2 bar Max. temperature: 138 °C Vacuum: -1 bar Power: 7,5 kW Current: 3 x 12 A Voltage: 220/380 V Hodpfxjxwy Uas Adwsfb Frequency: 50 Hz Length: 0,66 m Height: 1,30 m Weight: 300 kg Features: lids with clamping screws, pressure gauge, temperature measurement

Condition: good (used), System with rail supply, control system and compressor system. Nominal power: approx. 285 A. Interior dimensions: Height: 2700 mm. Depth: 6000 mm. Hodpex Hqcijfx Adwsfb Width: 2100 mm. Dimensions of goods: Length: approx. 12000 mm. Width: 3500 mm. Rail supply length: approx. 10000 mm. Condition: good, second-hand

Condition: like new (used), Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Static autoclaves: these are suitable for any format and are used for food packaged in cans, jars and other flexible materials. CHARACTERISTICS: * Forced ventilation *Shower system. * Temperature and time recorder. CONSUMPTIONS: - Steam: Maximum flow rate 2100 kg/h. Approximate consumption 475 kg/cycle. - Electrical energy in KW: 22kw - Cold water in tn/hr: Flow rate 25m³/h. - Compressed air in m³/min. The theoretical required to cool the autoclave in the worst air requirement condition (empty or with low load) is 2.91 m³/minute. - Total amount of drainage in ton/day: Depends on the number of cycles. Approximately 0.8 m3/cycle will be drained from inside the autoclave at the end of the cycle. The water output of the exchanger will be the same as the water input during cooling, 25 m³/h. Hfsdpfx Adox S Ipwjwob - Total raw water consumption in tn/day: 0.8 m³/cycle final + 12-16 m³ cooling.

Condition: excellent (used), Melag Here we offer you a tabletop autoclave. External dimensions: W 320 mm x H 350 mm x D 150 mm Tank capacity: 18.4 liters Permissible operating temperature: 144 °C Permissible operating overpressure: -0.95 - 3 bar Charging medium: steam/water Power consumption: 3400 W Rated voltage: 230 V Type: Vakuklav 40-B Scope of delivery: (as shown) Condition: used / used The autoclave was in operation until disassembly. Hfjdpfxjidmi Ae Adwsb Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: used, This listing is for a refurbished Laboklav 25B Autoclave Incl. commissioning in UK. (outside the UK is possible also, please request and we will try and accomodate) Horizontal device, 25l, glass lid Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 440 x 540 x 660 Chamber dimensions (Ø x d in mm) 265 x 465 Steam generator 2kW 1N 230V, 50Hz, 16A Refurbished according to manufacturer's specifications: Hfsdpfx Aoxx Anxsdweb Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status. Test runs to ensure and check functionality

Condition: good (used), Lagarde 4 trolley retort. Being removed from factory this month (August 2024). Hedpfx Adeudx Spswjfb

Condition: excellent (used), Transport dimensions Hfjdpfx Adewb Dzuoweb Length 5m Height 260cm Width 245cm

Condition: used, Year of construction: 1992, Technical details: max. temperature: 120 °C internal diameter: 980 mm internal length : 2580 mm external diameter: 1500 mm external diameter : 2740 mm wall strength: ca. 6,5 mm Hfodpfx Adju Nz I Towsb content: ca. 2000 l weight: 1425 kg Autoclave tank It is possible that this autoclave were built for the process of steam sterilization (according to operating parameters) The operating overpressure of +2 bar per room probably refers to the execution of the steam sterilization process, not to the pressure resistance of the container. - Permissible operating temperature 120 °C *

Condition: like new (used), functionality: fully functional, Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) to eliminate or inactivate pathogenic microorganisms. Static autoclaves: these are suitable for all formats and are used for food packaged in cans, jars, and other flexible materials. Inner diameter: 1,450 m. Characteristics: STEAM CONSUMPTION: - Steam consumption (6 Bar): 630 kg. - Flow rate: 2,000 kg/h. COLD WATER CONSUMPTION: - Consumption (4 Bar): 12 m³ - Flow rate: 40 m³/h. COMPRESSED AIR CONSUMPTION: - Consumption (6 Bar): 16 Nm³ - Flow rate: 160 Nm³/h. TUBULAR HEAT EXCHANGER: - Make: STERIFLOW - Model: HEAT EXCHANGER IJMS - Capacity: 170 L. - Surface area: 17 m². Hodpfox S Ik Usx Adwsfb

Condition: used, This listing is for a refurbished Laboklav 135M Autoclave 2018 Incl. commissioning in UK. (outside the UK is possible also, please request and we will try and accomodate) Vertical device, 135l, can be changed to horizontal version (stand required) Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 840 x 965 x 700 Chamber dimensions (Ø x d in mm) 500 x 660 Steam generator 10kW Fast re-cooling with double jacket 3N 400V, 50 HZ, 16A, CEE plug Refurbished according to manufacturer's specifications: Hfodpfxsxx Aqme Adwsb Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status. Test runs to ensure and check functionality

Condition: like new (used), functionality: fully functional, The static autoclave bases its sterilization system on the heat and cold transmission system by means of a water cascade. Hfjdpfjwn Hgtjx Adwob This autoclave is suitable for products that do not require movement during the sterilization process. The water, by means of a pump, is passed through a stainless steel plate exchanger for indirect heating. The heating and cooling of the water, which we use in all the cycles of the process, is carried out in the plate heat exchanger by means of steam or cold water. PRODUCTS: CANNED VEGETABLES, PASTA, PRE-COOKED FOODS, JUICES AND BEVERAGES, MEAT PRODUCTS, PATES, CANNED FRUIT, FISH. Features: Diameter: 1380mm. Basket: 1X0.99X0.93m. Heat exchanger. Automated loading and unloading. Operation by waterfall system. Control panel. Valves.

Condition: used, This listing is for the MMM Group Vakulab HL Medical Autoclave. The unit is in full working condition and is ready for immediate use. Overview The Vakulab HL autoclave from MM Group Medical is a high-performance, GMP-compliant sterilizer designed for the safe, reliable, and validated sterilization of laboratory instruments, equipment, and materials. Specifically engineered for use in pharmaceutical manufacturing, biotechnology facilities, and research laboratories, the Vakulab HL combines advanced vacuum-assisted steam sterilization with robust stainless steel construction to ensure consistent results in even the most demanding applications. Key Features Advanced Steam Sterilization Pre- and Post-Vacuum Cycles: Ensures efficient steam penetration and rapid drying Optimized Steam Distribution: Uniform sterilization across all load types Programmable Cycles: Fully adjustable parameters for different sterilization needs GMP & Cleanroom Ready Double-Door Pass-Through Design (optional): For installation between clean and non-clean areas Stainless Steel Chamber & Piping: High-grade AISI 316L for corrosion resistance and hygienic operation Integrated Monitoring: Real-time cycle control with full batch documentation capability Operational Safety & Control User-Friendly HMI: Touchscreen interface for programming and monitoring Automatic Door Operation: With safety interlocks to prevent accidental opening under pressure Built-In Diagnostics: Self-check functions for preventive maintenance Technical Specifications The Vakulab HL is a vacuum-assisted steam sterilizer available in multiple chamber volumes, typically ranging from 300 to 1,000 liters. The sterilization process operates at temperatures between 121 °C and 134 °C, controlled via a PLC-based system with an intuitive touchscreen human-machine interface (HMI). The chamber is constructed from AISI 316L stainless steel, ensuring corrosion resistance and compliance with GMP hygienic standards. A water-ring or liquid-ring vacuum pump enables pre-vacuum and post-vacuum phases for thorough air removal and effective drying. Door configurations can be single or double-door in either sliding or hinged formats, with safety interlocks to prevent opening under pressure. The autoclave requires standard utility connections for steam, water, compressed air, and electricity. It is designed to meet EN 285, PED, ISO 9001, and GMP compliance requirements, and can be validated to ISO 17665 sterilization standards. Applications Pharmaceutical Manufacturing: Sterilization of equipment, components, and containers Biotechnology: Sterilization of fermentation vessels, culture media, and instruments Research Laboratories: Sterilization of glassware, tools, and lab consumables Hospitals & Clinical Settings: Safe sterilization of surgical instruments and textiles System Components High-grade stainless steel chamber with polished finish Hjdsxv Dvfjpfx Adwjfb Vacuum pump system for pre- and post-cycle air removal Steam generation and distribution system Control panel with PLC and HMI touchscreen Integrated temperature and pressure sensors for validation Quality & Compliance Manufactured in accordance with GMP guidelines Complies with EN 285 and ISO 17665 sterilization standards Full FAT/SAT/IQ/OQ/PQ support for validation in regulated environments Designed for integration into cleanroom and production facilities Benefits Consistent, Validated Sterilization for a wide range of load types Flexible Confi...

Condition: used, This listing is for a refurbished Laboklav 25MV Autoclave Incl. commissioning in UK. (outside the UK is possible also, please request and we will try and accomodate) Horizontal device, 25l, glass lid Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 440 x 540 x 660 Chamber dimensions (Ø x d in mm) 265 x 465 Steam generator 2kW Hfjdpfx Adsxx Anrowsb Fast re-cooling by air Vacuum incl. pre- and postvacuum, heating during post vacuum 1N 230V, 50Hz, 16A Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status. Test runs to ensure and check functionality

Condition: used, This listing is for a refurbished Laboklav 55M Autoclave Incl. commissioning in UK. (outside the UK is possible also, please request and we will try and accomodate) Vertical device, 55l, can be changed to horizontal version (stand required) Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 740 x 765 x 600 chamber dimensions (Ø x d in mm) 410 x 460 Steam generator 3,3kW Fast re-cooling with double jacket Hjdoxx An Sspfx Adwjfb 1N 230V, 50Hz, 16A Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status. Test runs to ensure and check functionality