SEW gear motor with control unit/converter

SEW-EURODRIVE K97 DRE160MC4BE20HR/TF

Condition: good (used), Year of construction: 1997, functionality: fully functional, Used SKT IQF FloFreezer on NH3. The belt of the tunnel freezer consists of 3 sections: First section: Infeed belt (2,800 mm) This section is for laying the product on the belt to get into the tunnel freezer. Second section: Stepped belt (6,300 mm) Third section: Freezer belt (12,500 mm) The belt has a total length of 21.6 meters with an effective belt length of 18.8 meters and an infeed belt of 2.8 meters. The freezer comes with 10 centrifugal fans that are driven by an electric motor with an output between 37 kW and 15 kW. These fans push the air through the belt from under what makes this freezer so efficient and makes sure the product doesn't freeze on the belt. Too make sure that the tunnel freezer stays efficient and keeps its capacity their is an automatic defrosting system. The defrosting system consists of two freezing doors, one at the air entrance of the evaporator (coil) and one at the air exit of the evaporator. During freezing process the two doors slide before the evaporator so no cold air can pass through , then the hot gas opens (automatically) and all the melting snow /water flows through a drain system to the outside of the tunnel. Defrosting time is adjustable through the PLC. The control cabinet is the central hub for managing the SKT FloFreezer. It houses the main control systems, including the PLC, which ensures seamless operation of all machine components. The cabinet also contains the control interface for the fans, conveyor system, and other essential functions. To optimize performance and energy efficiency, each fan or pair of fans is equipped with a dedicated frequency inverter. These inverters allow for precise speed control, ensuring optimal airflow and reducing energy consumption. The system is fitted with high-quality Mitsubishi frequency inverters, including: • A800 & F700 – 37 kW • A500 (various models) – 22 kW to 30 kW • A500 (dual setup) – 4x 15 kW to 2x 18.5 kW The tunnel freezer has the following capacities: Product: Blueberries Capacity: 8,000 kg/hr Infeed temperature: +10°C Outfeed temperature: -18°C Evap. Temperature: -40°C Product: Peas Kjdpovxf Dyefx Aadodw Capacity: 10,000 kg/hr Infeed temperature: +10°C Outfeed temperature: -18°C Evap. Temperature: -40°C Product: Cauliflower or carrots Capacity: 6,300 kg/hr Infeed temperature: +10°C Outfeed temperature: -18°C Evap. Temperature: -40°C The tunnel freezer is still installed at the factory where they used it for freezing spinach and it's possible to visit it here.

Condition: new, Cardan shaft balancing machine BVI-03-74 Available in stock in Poland !!! Delivery time: one day!!! . . Machine for driveshafts weighing up to 150kg and up to 4700mm long. Suitable for small workshops with a large range of different shafts, including trucks. This balancing machine has high productivity and serves to balance the cardan shafts of cars and trucks. It makes the process of balancing the cardan shaft easy thanks to many technical solutions, while the machine has an affordable price, which reduces your financial burden and allows you to develop your business effectively. . . TWO TIMES faster than your machine. This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . . HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: Kdjdpfx Ajpbv Tfoadow 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. KEY FEATURES • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 4700mm, weight up to 150kg • Cardan installation in 1 minute • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Soft-bearing type machine - high sensitivity to any vibration • Machine is operated by one worker • Sliding bearing supports - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 150 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 4700 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Rotor speed range 1000-2000 rpm Power supply 380V, 3 Ph, 50Hz Power, minimum, 2,2 kW Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 700 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Year of construction: 1991, condition: like new (used), overall weight: 1,420 kg, rotational speed (max.): 1,485 rpm, 3 stainless steel volute casing pumps in process design 2 x CPK-CM 250-315 built in 1991 1 x CPKN-C1 250-315 year of construction 2011 !!! Price per piece !!! Pumps were operated on a test bench and all have very few operating hours! See pictures !!! Flow rate: 1001 m³/h (278 liters / second) Delivery head / delivery pressure: 18 m / 1.8 bar Pump speed: 1485 1/min NPSH: 5.00 m Shaft seal: single mechanical seal with sealing water Manufacturer: Burgmann Impeller type: closed centrifugal impeller Impeller diameter: 324mm Bearing type: roller bearing Lubrication type: Oil Lubricant monitoring Oil level controller Materials: 1.4408 (AISI 316) Pump housing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: CrNiMo steel Nominal diameter of suction nozzle: DN 300 Discharge connection Nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure pressure side: PN 16 Kdodpfx Aoqabiaoadsw Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 1/min Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Year of construction: 2012, condition: excellent (used), Alfa Laval Centrifugal pump Type LKH 85/240, 25,0 kW , Stainless Steel. Used! Good condition! Kdodpehck S Ejfx Aadow Inlet: 6" - Outlet: 6"

Condition: used, Year of construction: 1994, System: Decanter / centrifuge, used Manufacturer: Alfa Laval Kdjdjvz Dddepfx Aadow Model: ALDEC 406 Mach. No. 512-0006.01 Year of manufacture 1994 Maximum drum speed 4000 l/min Drum inner diameter

Condition: like new (used), Year of construction: 2019, functionality: fully functional, pressure: 15 bar, power: 1,00,000 kW (1,35,962.00 HP), operating pressure: 15 bar, temperature: 201 °C, operating temperature: 201 °C, Price by negotiation Kedewkq Nqspfx Aadodw

Condition: new, Year of construction: 2004, New heat exchanger, drawings included. Kjdpfxovwbh Sj Aadedw

Condition: used, adjustable gear motor, variable speed gear motor, electric motor Kdedpfx Aasb Drppedjw -Motor power: 5.5 kW -Speed range: 15 to 90 rpm -electrically adjustable -Drive shaft: Ø 40 mm -Construction: B3 -Protection class: IP54 -Dimensions: 600/700/H270 mm -Weight: 130 kg

Year of construction: 2020, condition: ready for operation (used), Four identical pneumatic knife-gate valves Watergates are available. Housing: stainless steel, valve blade: stainless steel, max. operating pressure: 4bar, medium temperature range: -35°C-120°C, machine length: approx. 1873mm, machine diameter: approx. 382mm, weight: approx. 280kg. Documentation available. On-site inspection is possible. Kedpsugmwlefx Aadodw

Year of construction: 2019, condition: good (used), Block Helical Inline Gearmotor Manufactur: NORD Drivesystems Model: SK 83 - 180MP/ 4 TF year of construction: 2019 Kdodpfxelkd Eme Aadew fabrication-N°: 202621779-100 Power: 18,5 kW Output torque: 3882 Nm Base weight: apr. 440 Kg Data sheet available. The ad is being edited, more detailed specifications & Plant description will follow. Transport can be organized if required. Welcome to Oussman-Machinery Please feel free to contact us for any further information. We speak: english, german, arabic & french. Oussman-Machinery