Meat processing machine

SFK-Danfotech KT 100

Condition: excellent (used), Year of construction: 2018, Baader 588 Filleting Machine The BAADER 588 is a unique and user-friendly filleting machine for small and medium-sized whitefish – fresh or defrosted. The consistent running of fish through the machine guarantees a higher throughput. Centralized mechanical adjustments of cutting parameters allows for different species and precise cutting. The BAADER 588 produces fillets of outstanding quality – even from soft fish. It has been specifically designed to allow for easy and efficient cleaning and servicing. The BAADER 588 significantly reduces subsequent trim work downstream. B’Logic® is our dedicated software solution for performance monitoring and yield control. Benefits For fresh or defrosted raw material Continuous and stable operation Simple to use Precise cutting tools minimize ‘giveaway’ Technical Data Working range (approx.) Cod: 400–2,500 g / 35–70 cm Haddock: 400–2,300 g / 35–65 cm Saithe: 400–2,000 g / 35–62 cm Hake: 160–800 g / 20–47 cm Alaska Pollack (h+g): 150–450 g Throughput Up to 35 fish/min. Up to 40 fish/min. (Alaska pollack) ‍ Features Simple operation and maintenance Rapid changeover for to different species Easy to access, maintain and clean Best fillet quality Active cutting tools Smooth surface as a result of reduced fillet stress during processing No gaping No blood spotting No black belly skin White membrane on Dujdotu Uu Dopfx Aa Net Flexible Suitable for a wide range of species Fresh or defrosted raw material Small machine footprint Direct fillet transfer to BAADER 59 Skinner possible for consistent product flow Hygienic, open and flexible design Open design for easy access and supervision Open design allows for easy cleaning Quick and easy to remove conveyor belt system

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Vemag HP20E whit associated Vemag BC236 forming attachment. Complete line from 2017 and not used very much since new! Perfect for making Hamburgers, Meatballs, Chevachipi Etc. Duedpfxsxrnq Sj Aa Not

Condition: like new (used), VF 200 vacuum filler All in one 240 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Filling pressure: up to 35 bar Portioning speed: up to 380 portions per minute Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Duodpexulh Hefx Aa Njt Portion weight: from 5 to 60.000 g Electric power: 7.5 KW

Condition: used, Used Jackstone vertical plate freezer with 20 stations and a capacity of 45kW (for example freezing 365 kg fish fillet per hour). Including adjustable block dividers to make 40 stations. Inner dimensions 1 full block per station : 1060x520x100 mm (55 liter) Inner dimensions 2 blocks per station: 527x520x100 mm (27 liter) Capacity and example based on: 56,2 kg fish fillet per station 20x 55 liter freezing stations temperature from +10°C to -18°C duration of one cycle: 185min including defrost, loading and undloading times evaporation temperature: -34°C Duedporlk Icofx Aa Nst

Condition: excellent (used), functionality: fully functional, WORKING MEASUREMENTS: Useful tape width: 55cm Number of spirals: 18 Spiral diameter: 4.20 m approx. Height of product entry: 1.20 m Height of product exit: 3.70 m Technical description: DRUM: It is the element in charge of transmitting the movement to the belt, it is built by stainless steel profiles welded to a base ring formed a kind of cage. MAIN STRUCTURE: It is the part of the tunnel that supports the conveyor belt (through an auxiliary structure) and the drum (through the bearings). It is built with folded and welded stainless steel plate profiles. AUXILIARY STRUCTURE: It supports the belt in its movement. To avoid metal-to-metal contact, it is covered with a special high density polyethylene profile. Dodjwnzahepfx Aa Nout DRUM SUPPORTS: The lower supports have two main functions: centering the drum and supporting its weight. In the upper part, other supports are placed whose mission is exclusively to collaborate in the centering of the drum. EVAPORATOR: A circular evaporator located at the bottom of the drum is used, which results in an important space saving and in a horizontal air circulation without dead spaces. FANS: Fans are placed at the top and at the bottom with the discharge directed towards the inside of the evaporator so that the air flows through the evaporator towards the product. The fans will be sized so that the air velocity, both through the evaporator and through the product, is adequate. TRACTION: Consists of an electric motor-reducer of adequate power, with previously calculated reduction ratio, so that the speed of the drum and therefore of the belt are suitable. SPEED VARIATION EQUIPMENT: This consists of a frequency variator that, by varying the power supply frequency to the preset electric motor drive (between 20 Hz. and 60 Hz.), modifies its speed and therefore the output speed of the reducer, which allows us an appropriate retention time in each case. CONTROL PANEL AND MANEUVERING BOARD: The control panel includes the electrical and maneuvering elements of the Tunnel. In its front panel there are the general maneuvering controls, as well as a synoptic of operation and with the indications of the safety and alarms indicated with a luminous signal. Inside are the control elements, frequency variator with potentiometer, electronic starters for fans and other equipment protection elements.

Condition: like new (used), Urschel 3600 Comitrol Serial: 2151 Dusdpfx Aaehzbhrs Not Stainless, 100l hopper, screw fed, previously used for biscuit breaking, 10Kw motor, on mobile frame, 3Ph

Condition: new, Year of construction: 2025, Vacuum mixer is designed for mixing crushed meat. Due to the freqency regulator to achieve speed control. The microprocessor control is by German company ADITEC. The working part is with spiral shape and paddles. Duedpfxswq D Rbs Aa Not TECHNICAL DETAILS: MODEL BM 300 Working volume 300 L/ 220 kg Instaled Power 3 kW Shafts speed frequency regulator Kind of shafts paddle Unload front valve Power 380 V 50 Hz Air power 6 bar L x B x H 1310 x 920 x 1500 mm.

Condition: good (used), GEA EasyFryer 4500/600 electrically heated fryer. 4.5m frying length, 600mm wide. High power 305 Kw model. Has come direct from ready meals factory where it was frying meal components. In lovely condition. Duodpfx Aevutgzja Njt

Condition: like new (used), Vacuum tumbler with cooling, 400 liters Container size: 400 liters Max. filling: 300 liters Mixing arm speed: -25 to +25 rpm Tumbling arm speed: 0 to +25 rpm Vacuum: 0–95 % Lifting aid, load capacity: 400 kg Connection voltage: 400 V 50/60 Hz 3-phase AC / N / PE Dujdpfjxu Dqgsx Aa Nst Power consumption: 8.9 kW Dimensions (W x H x D): 2934 x 2817 x 3001 mm

Condition: excellent (used), Control : Heidenhain TNC 426 Dimensions Space requirement (WxDxH) 1.92x1.85x2.4 m Weight Weight approx. 2'400 kg Working range travel lengthwise X-axis 500 mm Transverse travel Y-axis 255 mm Quill stroke (controlled) Z-axis 147 mm Quill stroke (manual) Z-axis 160 mm Machine head travel W-axis 500 mm Feed rates Speeds: Rapid traverse - X- and Y-axis 1-11,000 mm/min - Z-axis 1-6,000 mm/min - W-axis 1-3,600 mm/min Feed forces - X- and Y-axis 6'500 N - Z-axis 8'000 N Dodpfstp S R Hox Aa Njut Rapid traverse - X- and Y-axis 11 mm/min - Z-axis 6 mm/min Displacement measuring system Direct measuring system via linear scale X / Y / Z axis Resolution Indirect measuring system via rotary encoder Z axis Resolution in X-, Y-, Z- and W-axis 0.001 mm Accuracy of position tolerance P axis(es) X / Y 0.005 mm Position spread Ps axis(es) X / Y 0.003 mm Z / W 0.005 mm Table clamping surface (lxw) 885 x 320 mm Working area T-slots: - Number 5 - - Width 12-H8 mm - Spacing 50 mm Permissible table load 250 kg Table height from floor 1040 mm Distance table-spindle nose (min-max) 0-120-620 mm Horizontal projection 300 mm Work spindle Quick-change tool system SF 32 - Hydraulic tool change via push buttons - - Repeat accuracy 0.002 mm - Changing time (manual) approx. 5 sec Speed range (infinitely variable) 50-9,000 rpm Drive power 7.6 kW Max. Torque 65 Nm Cutting capacity Drilling capacity ø 25 mm Thread cutting M 20 - Shuttering Semi-shuttering with sliding doors - - Coolant Coolant: Lubrication - External tank, capacity 100 l - Pump flow rate 75 l/min Central lubrication system Vogel