Drive system

SICA S.p.A. TRS/U 110-800

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Year 2007 - Co-Pilot with touchscreen - Right hand infeed Kdsdpju Tuiisfx Ab Hor - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): 4 - 18 - Knife pre-setting device - Sets of knives: 2 Condition: cleaned in good working condition

Condition: used, Year of construction: 2014, The Kongsberg C series is a multifunction super-wide digital cutting table for soft and rigid signage production. It’s perfect for protective packaging and can handle a wide range of materials, from foam and plastics, flexible materials, folding carton and all kinds of corrugated. The Kongsberg C table is designed to keep up with the faster, wider printers of today and tomorrow. Exceeding the standards in versatility, precision and productivity, it has everything that Kongsberg tables are noted for, and more. Max. material size: 3200 x 3200 mm Max. speed: 1666 mm/s Max. acceleration Kodszcqp Tjpfx Ab Hsdr 15.7 m/s2 Tools: - vibracut HF - ⁠presscut - ⁠rotacut - ⁠rm knife - ⁠heavy duty unit - ⁠cordoni di varie tipologie - ⁠HD-30 - ⁠V-notch knife 45 In production, demo possible upon request For further technical details please refer to attached brochure

Condition: good (used), Year of construction: 2016, Ref:11076 . 2016 Muller Martini SIGMA Three Knife Trimmer On demand trimmer for digital dooks finishing Features: Designed for the finishing of both offset- and digitally-produced books in a one-off, short-, or large-run workflow. Fully-automated, one-off book 3-knife trimmer. Ultra-efficient digital book trimming system with zero makeready for optimal one-off book production. Workflow can be consolidated and efficiently processed through the SigmaTrimmer work center with minimal production planning effort & considerable labour savings. Kdodpjyw Hwdsfx Ab Hsr Bound, untrimmed books of varying sizes and thickness can be fed into the SigmaTrimmer continuously, without stopping to change parts or key in any data. Book printers can cut books of different formats and thicknesses in quick succession, without interruption. The format for each book is read with a barcode scanner during infeed and all settings are made automatically, which eliminates makeready time. Specification: Max speed: 1,000 cycles/hr Max untrimmed size: 320x240mm Min untrimmed size: 154x108mm Max book thickness: 40mm Min book thickness: 2mm Max Front trim: 86mm Min front trim: 3mm Max foot trim: 75mm Min foot trim: 3mm 5 x Sigma trimmers available, all the same age. Can be bought individually or as multiples.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,100 h, load capacity: 2,500 kg, lifting height: 3,400 mm, free lift: 1,210 mm, fuel type: diesel, mast type: triplex, construction height: 1,988 mm, power: 37 kW (50.31 HP), fork length: 1,200 mm, empty load weight: 4,950 kg, total length: 3,045 mm, drive type: Diesel, construction width: 1,450 mm, All-terrain forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: Very good Front tires Type: Pneumatic Front tires Condition: 80 - 100% Kdjdpfx Abszhp Ahs Hjr Rear tires Type: Air Rear tires Condition: 80 - 100% Description: With the MC25, available as a two-wheel or all-wheel drive, you can load loads safely and precisely on any terrain. The 30 cm ground clearance guarantees excellent climbing ability on your fields. Good all-round visibility and the compact and robust design ensure optimum safety at work. Discover the MC25, your new partner for more productivity! This Manitou rough-terrain forklift is also available in two-wheel or four-wheel drive technology in the MC 25-2 or MC25-4 or MC 30-2 or MC 30-4 version. Sideshift, 3rd valve, rear working lights, front working lights, semi-cab, full free lift,

Condition: used, Year of construction: 2022, load capacity: 5,000 kg, lifting height: 5,550 mm, total length: 6,238 mm, · Bedienertyp Sitzen · Max. Tragkraft 5000 kg · Lastschwerpunkt 600 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 773 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 11520 kg / 1805 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 3285 kg / 5040 kg · Bereifung Pneumatisch · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1620 mm · Abstand zwischen den Hinterrädern 1740 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2486 mm / 2486 mm · Sitzhöhe 1455 mm · Gabelträger DIN 15173 A/B 4A · Gangbreite für Palette 1000 x 1200 quer 6812 mm · Gangbreite für Palette 800 x 1200 längs 6812 mm · Wenderadius 4640 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.40 m/s Kjdpfx Abjxd Ev Aj Hodr · Festellbremse Hydraulik · Nennleistung Verbrennungsmotor 55 kW · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 230 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053: 78 dB

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 960 h, load capacity: 2,500 kg, lifting height: 4,000 mm, free lift: 1,321 mm, fuel type: diesel, mast type: triplex, construction height: 2,045 mm, power: 44 kW (59.82 HP), fork length: 1,200 mm, empty load weight: 4,475 kg, total length: 2,260 mm, drive type: Diesel, construction width: 1,540 mm, Rough terrain forklift Load center: 500 Kdjdpfx Ajzh Rmbeb Her ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostatic Speed class: 20 Condition: Like new Technical condition: very good Front tire type: Pneumatic Front tire size: 15.5/55 R 18 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire condition: 60 - 80% Side shifter, 3rd valve, 4th valve, half cabin

Condition: used, Year of construction: 2022, load capacity: 5,000 kg, lifting height: 5,540 mm, total length: 6,240 mm, · Bedienertyp Sitzen · Max. Tragkraft 5000 kg · Lastschwerpunkt 600 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 773 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 11520 kg / 1805 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 3285 kg / 5040 kg · Bereifung Pneumatisch · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1620 mm · Abstand zwischen den Hinterrädern 1740 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2486 mm / 2486 mm · Sitzhöhe 1455 mm · Gabelträger DIN 15173 A/B 4A · Gangbreite für Palette 1000 x 1200 quer 6812 mm · Gangbreite für Palette 800 x 1200 längs 6812 mm · Wenderadius 4640 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.40 m/s · Festellbremse Hydraulik · Nennleistung Verbrennungsmotor 55 kW · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V Kdedpjxd Exdefx Ab Hsr · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 230 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053: 78 dB

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, lifting height: 5,530 mm, total length: 6,000 mm, Bedienertyp Sitzen · Max. Tragkraft 5000 kg · Lastschwerpunkt 600 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 773 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 11520 kg / 1805 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 3285 kg / 5040 kg · Bereifung Pneumatisch · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1620 mm · Abstand zwischen den Hinterrädern 1740 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2486 mm / 2486 mm · Sitzhöhe 1455 mm · Gabelträger DIN 15173 A/B 4A Kjdpey E Uhmefx Ab Hodr · Gangbreite für Palette 1000 x 1200 quer 6812 mm · Gangbreite für Palette 800 x 1200 längs 6812 mm · Wenderadius 4640 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.40 m/s · Festellbremse Hydraulik · Nennleistung Verbrennungsmotor 55 kW · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 230 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053: 78 dB

Condition: new, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 5,020 mm, total length: 4,800 mm, · Bedienertyp Sitzen · Lastschwerpunkt 500 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 747 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 7490 kg / 1475 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 2155 kg / 3810 kg · Vorderspur 1520 mm · Abstand zwischen den Hinterrädern 1630 mm · Sitzhöhe 1426 mm · Gabelträger DIN 15173 A/B 3A Kdjdpfx Aboztgmbs Hsr · Gangbreite für Palette 1000 x 1200 quer 6180 mm · Gangbreite für Palette 800 x 1200 längs 6180 mm · Wenderadius 4030 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.60 m/s / 0.60 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Zugkraft / Zugkraft (unbeladen) 6290 daN / 4250 daN · Festellbremse Haudraulik · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Motorleistung gemäß ISO 1585 65 kW · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 185 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053 78 dB

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 4 h, load capacity: 5,000 kg, lifting height: 4,800 mm, free lift: 600 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,685 mm, power: 55.4 kW (75.32 HP), motor manufacturer: Deutz, gearing type: automatic, fork carriage width: 1,820 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 60 mm, ground clearance: 570 mm, turning radius (outer): 4,150 mm, overall weight: 11,280 kg, total height: 2,685 mm, total length: 4,865 mm, total width: 2,105 mm, color: blue, Equipment: CE marking, all wheel drive, cabin, front guard, head guard, lighting, pallet forks, sideshift, trailer coupling, === KEY SPECIFICATIONS === Year: 2026 Hours: 4 test hours Condition: New / unused Max. lifting capacity: 5,000 kg Max. lifting height: 4.8 m Free lift height: 600 mm Mast type: Triplex Kdodpezi Nz Hefx Ab Hsr Fork length: 1,200 mm Side shift: Yes Fork positioner: Yes Drive type: Diesel Transmission: Automatic Cabin: Closed Heated cabin: Yes Tyres: Solid tyres Tyre condition front: 100% Tyre condition rear: 100% Stabilisers: No Engine manufacturer: Deutz Engine: Deutz TCD 3.6 L4 Engine power: 55.4 kW / 75.3 hp Emission class: Stage V Weight: 11,280 kg Overall dimensions (L x W x H): 4,865 x 2,105 x 2,685 mm Drive-through height: 2,685 mm Number of wheels: 4 Steered wheels: 2 Driven wheels: 4 === HIGHLIGHTS === New and unused rough terrain diesel forklift Only 4 test hours Deutz TCD 3.6 L4 diesel engine 5,000 kg lifting capacity Triplex mast with 4,800 mm lifting height Closed heated cabin 4-wheel drive Sideshift and fork positioner included Solid tyres with 100% remaining profile CE certified and ready for immediate use === CONDITION === New / unused machine with only 4 test hours. The hours are from testing and inspection only. No previous owners, maintenance history available. Fully checked and ready for immediate use. === LOCATION & PRICE === Located in Sittard, The Netherlands. Worldwide delivery possible. Price on request (EXW / excl. VAT). The Hangcha CPCD50-XW95C-RT4 is a new 2026 rough terrain diesel forklift with a 5,000 kg lifting capacity and a 4,800 mm lifting height. Equipped with a Deutz TCD 3.6 L4 diesel engine, 4-wheel drive, closed heated cabin, sideshift and fork positioner, this machine is suitable for demanding outdoor and rough terrain applications. All machines are inspected, CE-certified and available with professional support, transport and export documentation on request. === DELIVERY === Worldwide delivery possible. Transport can be professionally arranged by Collé Rental & Sales.