Stirring Tanks

Sielmann

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 3.04-00054, Equipment: type plate available, Used Bellaform extruder Type: BH45-30D Year of manufacture: 2013 Kedpeuxa Abefx Adwewt With screw dimensions 45 mm - 30 l/d, screw speed approx. 160 rpm With 30 kW water-cooled servo motor, with gearbox Cylinder with 4 heating/cooling zones and water bushing in the feed area Material hopper plus a COLORTRONIC dosing screw for masterbatch A melt pressure sensor Control cabinet integrated into the machine frame, with factory-new PLC and With new touch panel for simple and intuitive operation This extruder has been functionally tested! Dimensions: approx. 195 x 70 x 200 cm (L x W x H with hopper)

Year of construction: 1997, condition: refurbished (used), 2 pieces volute casing pump in process design 1 piece completely overhauled, new ball bearings for pump and motor. Mechanical seal overhauled by specialist company. All seals new. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 1/min Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277mm Bearing type: roller bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type drive end oil Lubricant monitoring Oil level controller Materials: Pump housing: Duplex steel Noridur 1.4593 (9.4460) Wear plate: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Heat-treated steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: Cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Nominal size of suction nozzle: DN 80 Discharge connection Nominal diameter: DN 40 Nominal pressure suction PN 10 Nominal pressure pressure PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: gray cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 1/min Frequency: 50 Hz Rated voltage: 400 V Rated motor power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid Kwsdpfsiuznusx Adwjt - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump Ksdpjiyx Uzofx Adwowt cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 1785-6201, Single-screw extruder Kwedpfxeu Itqde Adwot

Condition: used, functionality: fully functional, A homogenizer is the machine that enables the size reduction of globules and fat particles of food products. In other words, it reduces variations in two heterogeneous substances, makes them uniformly consistent and reduces separation after mixing. Kwedpfjwnx H Ejx Adwet As a result, we obtain particles of micrometer and nanometer size. This size will always depend on the characteristics of the product in question and the results we seek to achieve. Homogenizers stabilize fat emulsions and disperse solids in aqueous solutions. In this way, we avoid that with the difference in density, some parts of the mixture remain on the surface and others precipitate to the bottom.

Condition: used, Item: AV-11841-Vertical40m3tank Used vertical tanks, capacity 40.000L Exterior dimensions: Dia Ø 3200/3400 mm Total H 9600 mm incl. gear. Cylinder height: 7200 mm. Kwodpfji E Abiox Adwet Vertical stainless steel tanks - 3 pcs. Insulated with 100 mm rockwool completed with flat plate. Conical bottom 35 degrees with 4" outlet. Klöffer top with manhole. Powerful top mounted agitator. 37 kw agitator. AISI 316.

Condition: excellent (used), Year of construction: 2006, Single-screw extruder Battenfeld BEX 1-75-30:B with co-extruder BEX 35-30:B Application for PE, PP Year of manufacture 2006 Screw diameter 75 mm Drive Baumüller 171 KW Kwedpfxeug Edko Adwot RPM 2,450 Total output approx. 850 kg/h The extruder was converted to frequency drive by Battenfeld in 2014, new three-phase motor and frequency converter Gearbox was overhauled in July 2024 Condition: it is in very good condition Last application PE pipes Battenfeld co-extruder BEX 1-35-30:B Application PE PIPES Connection value: 69 Kva Output approx. 110 kg/h Year of manufacture: 2010 The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Germany

Condition: good (used), Machine in very good condition Ksdpfx Adevuturjwswt I have 5 pieces

Year of construction: 1991, condition: excellent (used), Name: Cone Mixer Manufacturer: Bolz GmbH Type: MF 400 Year built: 1991 Material: Stainless steel Description: Vertical Conical Batch Mixer Model: The cone mixer is sanded on the inside with 240 grit and stained on the outside. Total content: 9250 liters, Useful capacity: 4000 liters Parts in contact with product: V4A 1.4401/04 (316) Dimensions: L 2800 x W 2800 x H 5000 mm Empty weight: Approx. 4000 kg Technical doc.: Yes Kedpfx Adsiy D Emewowt Message: Intended use: pharmaceutical, food, chemical. Agitator: screw stirrer Voltage: 400 volts Motor: explosion-proof Temperature: 80 °C without pressure. Accessories: Beater Condition: Used - very good Price: On demand

Condition: excellent (used), IPP Kwedpfx Aswf I Sfsdwst Lobe pump 7.5kW Very good condition