Double Girder EOT Crane

SIEMAG

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, overall weight: 20,500 kg, fuel type: diesel, tank capacity: 1,500 l, color: white, power: 1,000 kW (1,359.62 HP), output current: 1,811 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 1,000 kW (1,359.62 HP), nominal power (apparent): 1,250 kVA, continuous power (apparent): 1,250 kVA, total length: 6,060 mm, total width: 2,440 mm, total height: 2,900 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, 6 units available. Diesel Generator Container – Cummins KTA50-G3 – 1,250 kVA Many other sizes available from 1,000 kVA – 2,500 kVA! For sale: one soundproofed diesel generator set in a 20-ft container, suitable for emergency (standby), island (off-grid), and grid-parallel operation. The unit is configurable for 50 Hz operation and comes fully equipped for automatic backup power applications. Performance Data 50 Hz PRP: 1,250 kVA / 1,000 kW / 1,811 A Voltage: 400 / 230 V Power factor: cos φ 0.8 LTP: 1,375 kVA Main Components Diesel Engine: Cummins KTA50-G3 Generator: Stamford PI734B Power Output: Integrated generator circuit breaker Connections: M12 cable lugs on copper busbar Noise Emission 75 dB(A) at 7 m ±3 dB(A) Operating Modes Island/off-grid mode Grid-parallel operation (with synchronizing device) Emergency power mode (integrated mains monitoring) Seamless resynchronization External circuit breaker control possible Equipment Engine pre-heater Battery charger Rapid power availability in case of mains failure: < 15 seconds 1,500-liter integrated diesel tank, switchable to external tank via 3-way valve Oil-resistant container base (catch basin for all fluids) Connections available for external/mobile fuel tank systems Container / Generator Construction Soundproofed design, 20 ft standard container Exhaust outlet: top Air outlet: top Air inlet: front side Dimensions: Length: 6.06 m, Width: 2.44 m, Height: 2.60 m + 0.30 m exhaust flap Weight: approx. 20.6 t incl. diesel Fields of Application: Godoygaavspfx Ad Ujip Emergency power supply, industrial facilities, infrastructure, construction site power, temporary power supply Price: on request Location: Pupping, Austria Availability: 6 units in stock

Year of construction: 2009, condition: good (used), Load capacity: 30 t Giodpfx Aoqiz N Red Usp Fine lift Lifting height 9 meters

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, CNC Tool Grinding Machine Walter Helitronic Power FH, Year of manufacture: 2015 Fanuc control system with cylindrical pallet loader, pallets from 4 mm to 25 mm 8-position disc changer, electrostatic mist collector fire extinguishing system, Software: Walter Window Mode and Toolstudio, Gisdpsyh Dl Nofx Ad Uop Software packages: 001, 002, 003, 016, 017, 026, 090, 091, 098, 099, 032, Helicone, Helidrill, Heliflute, NC-Mode, Power-IMS, Toolstudio_Standard, with preparation for hydraulic unit (steady rest), The grinding spindle (single spindle) is directly driven and equipped with an oil cooler. The hollow shaft motor for the A-axis operates at a speed of 0-750 rpm. The C, X, Z, and A axes were overhauled in 2022.

Condition: not inspected (used), Year of construction: 2008, Parker Hannifin Instron Hydraulic power unit Year of construction 2008 Power 90KW Main fuse 200A Working pressure 285bar flow rate 165L/min Tank 850 litres Gjdpfxoq Nyw Aj Ad Uoip The offer is aimed exclusively at traders within the meaning of § 14 BGB No sale to private individuals!

Condition: new, Year of construction: 2026, Technical specifications: - max. Thickness of cut sheet 1.2mm, - max. Working width: 3000 mm - in the equipment there is a stop for adjusting the cutting depth and a frame for holding the plate. - the extension table makes it easy to carry large-format metal sheets on the table - measuring table with graduation - robust and compact steel construction - high-quality, durable steel knives - extremely stable and heavy construction of cast iron - ground and hardened plate shear knives - Back gauge system - CE mark - declaration of conformity open design suitable for endless cuts large cast work table engine power 2,2 kW oil HL 46 pressure force 4t working pressure 120-150 bar has hydraulic compensators from the cutter bar up Giedoda I Ihjpfx Ad Uop Dimensions: Length: 3500 mm Width: 750 mm Height: 1150 mm Weight: approx. 1000 kg

Condition: excellent (used), Span actual approx. 25,0 m Jibs fixed leg useable (possible)/ total (possible) max. approx. 18,5 (21,5)/22,0 (25,0) m swing leg useable/total max.approx. 12,5/16,5 m Lifting height under Spreader actual/possible approx. 11,3/14,0 m Construction/reconstruction TAKRAF/TEICHMANN Year of reconstruction 2019 Godpod N D U Dofx Ad Uoip

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 1,10,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: Gjdpfx Aoyahv Sod Uoip FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: used, MOSTANA STANKO 1M65-5 HEAVY DUTY CENTRE LATHE MAKE MOSTANA STANKO, MADE IN USSR MODEL 1M65-5 YEAR MID 80s SWING OVER BED 1000.0 mm SWING OVER SADDLE 650.0 mm Gedpfsx Dmi Dsx Ad Ueip CHUCK SIZE 1000.0 mm SPINDLE BORE 135.0 mm SPINDLE SPEEDS 5- 500 RPM SPINDLE POWER 22 Kw PLUS POWER FEED TO THE SADDLE METRIS AND ENGLISH SCREW CUTTING 1000.0MM 4 JAW CHUCK 2 AXIS DIGITAL READOUT CLEAN BED WORKED ON COMPOSITE, NO METAL

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Godpjwbuyzefx Ad Ueip

Condition: used, Year of construction: 1996, center height in crank: 1,100 mm, workpiece weight (max.): 80,000 kg, grinding length: 14,000 mm, grinding wheel diameter: 915 mm, grinding diameter: 2,000 mm, quill stroke: 200 mm, quill diameter: 260 mm, workpiece weight between centers: 8,00,00,000 g, workpiece diameter between centers: 2,000 mm, workpiece length between centers: 14,000 mm, power: 35 kW (47.59 HP), High capacity cylinder grinder with hydrostatic guides POMINI mod. HD 402/425 - year 1996 - maximum diameter 2000mm - working length 14000mm - tip capacity 80000 kg. Possibility of complete retrofit of the machine's electrical unit, manageable updates or modifications for application change. Grinder disconnected and ready for collection. Gjdpfx Astxlyxjd Uoip