Bolster/t-slot plate

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° Nledpfx Abez D Taaj Uog MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Condition: used, Year of construction: 1984, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, table load: 5,000 kg, spindle diameter: 110 mm, total height: 3,800 mm, total length: 5,000 mm, total width: 3,000 mm, table length: 1,520 mm, table width: 1,225 mm, feed length X-axis: 1,800 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 2,000 mm, Tool holder SK50, Heidenhain control, machine is ready for collection and immediately operational. Nlodpfx Abexga Tnj Ueg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 37,000 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Laser power: 3,200 watts Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,250 mm Travel range, Z-axis: 115 mm Sheet thickness, structural steel max.: approx. 20 mm Sheet thickness, stainless steel max.: approx. 15 mm Sheet thickness, aluminum max.: approx. 8 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Nedpfez A D Irsx Ab Uolg Total connected load approx.: 88 kVA Machine hours: 74,000 h Beam hours: 37,000 h Dimensions & Weight Footprint: 8,660 x 6,110 x 2,700 mm Machine weight: approx. 7,300 kg EQUIPMENT Closed machine frame with integrated laser unit Automatic pallet changer TFT color screen Positioning laser diode Spray device Motion unit for high-precision machining Additional high-dynamic Yp axis Drives with maintenance-free three-phase servomotors Closed beam guidance Conveyor for small parts and waste TRUMPF laser CO2 laser TruFlow 3200 High-frequency excitation Low-maintenance turbo radial blower Gas mixer (integrated) Laser power control Laser logbook function Laser cutting head with 5" lens Laser cutting head with 7.5" lens Universal quick-change device ControlLine Control system SINUMERIK 840D Automatic shut-off ContourLine SprintLine Teleservice Microweld RJ45 network connection Network connection via telediagnostics CE marking Light barriers Multi-chamber extraction system Compact dust collection system

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, empty load weight: 550 kg, total length: 3,210 mm, total width: 1,162 mm, total height: 2,050 mm, discharge height: 1,080 mm, machine/vehicle number: 2211410, TECHNICAL DETAILS Capacity, light vegetables: max. 400 kg/h Capacity, heavy vegetables: max. 800 kg/h Nedpfxjz Ahnrs Ab Uslg MACHINE DETAILS Voltage: 3~ 400 V Frequency: 50 Hz Connected load: 7 kW Fuse rating: 25 A Water content: 500 l Protection class: IPX4 Dimensions & Weight Dimensions (L x W x H): 3,120 x 1,162 x 2,050 mm Machine weight: 550 kg Loading height: 1,140 mm Unloading height: 1,080 mm EQUIPMENT Barbotage system Frequency-controlled pumps Inverter control Stainless steel design Conveyor belt with product discharge Rinsing via spray device Height-adjustable feet Spiral water guide Extended and raised product discharge zone, special design Extension of the product discharge zone: 200 mm Documentation

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25.4 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10000 [rpm] Nodpfx Aouha Ugob Ujlg - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 5 GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] SECONDARY OPERATION - Number of positions : 7 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2270 x 1650 [mm] - Machine height : 2200 [mm] - Machine weight : 3500 [kg] MACHINE HOURS - Number of working hours : 80490 [h] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5,S6 - Rotating guide bush - Parts catcher - Ejection of workpiece - Chips conveyor - Coolant tank * with high-pressure pump - Bar loader : ROBOBAR SBF 532 - Oil mist extractor - Cooling unit

Condition: used, machine/vehicle number: BXMS230118020, No minimum price – guaranteed sale to the highest bidder! The new price was €4,950! TECHNICAL DETAILS Relief for the lower back: up to 25 kg Support force: continuously adjustable MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 600 x 600 x 600 mm Weight: 5 kg FEATURES Purely mechanical control at hip height Automatic deactivation of support during walking Force absorption during bending and force release during lifting Load transfer from the shoulders to the thighs via a support structure Nljdpjzz H D Aefx Ab Uog Energy storage Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 2000

Condition: used, Year of construction: 2019, battery capacity: 1,376 Ah, battery voltage: 80 V, overall weight: 2,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Battery type: 8 PzS Nominal voltage: 80 V Capacity: 1,376 Ah Voltage in idle state: 88.89 V Suitable for: Linde E70 and E80 Dimensions & Weight Dimensions (L x W x H): 1,290 x 1,030 x 770 mm Net weight: 2,500 kg All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Nedpfx Abezz H Dps Uslg Side loading up to 6 tons is possible with a large forklift truck on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1156

Condition: new, bore capacity in steel (diameter) 15 / 18 mm throat 180 mm bore stroke 80 mm turning speeds 200 - 4000 U/min 250 x 220 mm distance drilling head - clamping area max. 380 mm total power requirement 1,1 / 400 kW / Volt column diameter 65 mm tool taper MK 2 weight of the machine ca. 0,08 t dimensions 0,4 x 0,5 x 0,9 m Nlsdpofg U Tiofx Ab Ueg precise bench drill: - Large speed range - Programmable thread cutting - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection

Condition: used, Year of construction: 2020, overall weight: 540 kg, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS FEM class: FEM 3 Suitable for forklift load capacity: 3,000–5,000 kg Fork adjustment: 4-way Fork length: 1,200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,500 x 1,600 mm Self-weight: 540 kg EQUIPMENT 4-way fork adjuster Fork carriage Fork tines with 1,200 mm length All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Nlodpfxezz H Die Ab Ujg Lateral loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1152

Condition: used, Year of construction: 2019, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity forklift: 2,500–5,000 kg Fork length: 1,350–2,000 mm Mounting: FEM 3A MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,350 x 800 x 1,000 mm Net weight: 250 kg EQUIPMENT Hydraulic telescopic forks For loading onto a pallet for truck loading All dimensions are approximate. No guarantee is given for typographical or measurement errors. Nodjzz H A Espfx Ab Uolg Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 1103

Condition: used, functionality: fully functional, machine/vehicle number: 7085, Used universal cylindrical grinding machine Manufacturer: WMW Model: SU 315 x 1000 mm Equipped with internal grinding attachment Maximum workpiece diameter: 315 mm Maximum grinding length: 1000 mm Grinding spindle speed: 1340 rpm Workpiece speed: 22–500 rpm Longitudinal table travel: 5–1680 mm Table feed rate: 0.05–5 m/min Maximum workpiece weight: 300 kg Connected load: 12.5 kW Nljdpfx Abswl A H De Ueg Machine weight approx.: 5.8 t

Condition: used, Year of construction: 2022, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS FEM class: FEM 3 Load capacity forklift: 3,000–5,000 kg Fork length: 1,350–2,350 mm Nljdpfx Abszz H Afj Usg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,350 x 1,000 x 1,000 mm Self-weight: 200 kg All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In case of delayed collection, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1081

Condition: used, Year of construction: 2019, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg FEM class: FEM 3 Suitable for forklift load capacity: 3,000–5,000 kg Internal opening width: 70–940 mm Rotation range: 360° Fork length: 2,400 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,350 x 1,000 mm Self-weight: 1,000 kg Originating machine: Linde E50HL EQUIPMENT 3rd, 4th, and 5th valve Rotating clamp with 360° rotation function Fork positioner Side shifter Fork, 2,400 mm long All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Nodpfx Abjzz Hzze Uslg Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1013

Condition: used, Year of construction: 1973, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm total power requirement 4,5 kW weight of the machine ca. 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Nlodpst Hwt Sefx Ab Usg Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features * HEIDENHAIN Digital Display for 3 axes. * Hardened guideways. * Ball screw spindles. * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. * Moving operating platform. * Hanging control panel. * Manual operating control. * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. * Hydraulic clamping of column and slides. * Motor driven tool clamp. * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.

Condition: used, machine/vehicle number: 90540056, Year of construction: 2017, operating hours: 788 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Nedpfxezz Hzus Ab Ujlg Lifting height: 2,500 mm Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 150 Ah Battery type: 2 PzB Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 1,720 mm Own weight: 800 kg Service valid until: 07/2027 UVV (Occupational Safety and Health) certificate valid until: 07/2027 Operating hours: 788 h All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 446