Heavy duty machining center

SIGMA Eccon

Condition: used, Year of construction: 2015, x-travel 1.200 mm y-travel 600 mm z-travel 675 mm Control C 620 HSCI FS table-size 1.220 x 620 mm 40 fach Distance between table and spindle 735 mm turning speeds 10.000 U/min spindle drive 18 kW Nkedpfxsx Ak Hds Adwet Internal cooling system 30 bar -Electronic steering wheel. -LINEAR RULES. -Laser probe measuring tools. -Preparation for piece measuring probes. PROBE NOT INCLUDED.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller model: HASS, table width: 914 mm, table length: 2,134 mm, table load: 1,800 kg, overall weight: 11,340 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 7,500 rpm, coolant supply: 15 bar, distance table center to spindle nose: 864 mm, spindle motor power: 22 W, spindle nose: ISO 40, number of slots in tool magazine: 40, tool length: 406 mm, tool diameter: 63 mm, tool weight: 5,500 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​vertical machining center with HAAS CNC Nksdpowrfamjfx Adwjt

Condition: excellent (used), Fixed bed milling machine Zayer model KF 3000 with CNC heindenhain 355, prepared with external computer for cad cam, table 3000mm x 1000mm, travels, longitudinal 2700mm, transverse 1250, vertical 1000mm, rapid advances 15000mm/min, huron iso 50, spindle speed 3 ranges 3000 rpm variable, recently repaired huron head, with change of gear pair and all the bearings of the same head.power 30kw, weight admitted on table 10000kg, machine in good condition, weight of the machine 25tns. Nkedsvdv Tcspfx Adwet

Condition: used, Year of construction: 2008, Swing over bed 923,8 mm Swing over cross slide 755 mm Nkodpfx Asu Sn Hzjdwst Max. turning diameter 356 mm Max. turning length 510 mm X/Z-axis movement 260/590 mm Turret w/12 stations Spindle speeds 5000 rpm Spindle bore 73 mm Control: MSX-850 III Equipped with: Collet chuck w/collets Chip conveyor 3 standard tool holders No Gantry loader incl.

Condition: good (used), Year of construction: 2002, TRAUB TNL 12/7 CNC sliding headstock automatic lathe TECHNICAL DATA Bar capacity: 12 mm Main headstock strokes: 130 / 80 mm Spindle power: 4 kW Speed, main spindle: 12`000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max diameter, counter spindle: 12 mm Speed, counter spindle: 12`000 rpm Nedpfx Ajt E Dbyodwekt Dimensions: 2850 x 1100 x 1480 mm SCOPE OF OFFER U.A: (list not exhaustive): Traub TNL 12/7 CNC lathe Meyrat high-frequency spindles, 2 pieces Tool holders (driven and non-driven) FMB Minimag 3200 C bar loader Hydraulic unit High pressure pump Chip conveyor Exact scope of supply according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 16 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 16 m/min, nominal power (apparent): 16 kVA, controller manufacturer: Heidenhain, controller model: ITNC 530, table load: 800 kg, overall weight: 5,300 kg, spindle speed (min.): 10,000 rpm, operating hours of spindle: 8,500 h, spindle motor power: 12 W, spindle nose: ISO B40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Machine in very good condition and maintained by the manufacturer. Available immediately. Renishaw probe Video available on request. Nodewxrgtopfx Adwjkt Delivery and installation by us possible.

Condition: used, Year of construction: 1970, pressure:63 t throat:250 mm stroke:8-100 mm table depth:710 mm table width:500 mm ram head dimension:450x280 mm ram adjustment:63 mm no. of strokes:140 Hub/min total power requirement:7 kW weight of the machine ca.:3,5 t Nsdpfx Adjcxxx Howskt

Condition: used, X Axis 30.0 in 762 mm Nedoiypzdopfx Adwokt Y Axis 16.0 in 406 mm Z Axis 16.0 in 406 mm Read for inspect Ready for delivery

Year of construction: 2003, condition: good (used), Strokes 560x 410 x 510 mm, table 900 x 410, magazine 30 tools, spindle 12.000 rpm, chip conveyor Nodpfx Adjiwkhkowekt

Condition: used, Year of construction: 2005, functionality: fully functional, travel distance Z-axis: 1,219 mm, rotational speed (max.): 2,000 rpm, travel distance cross slide: 203 mm, Flatbed Lathe Manufacturer: Haas Type: TL-2 S/N: XXXXX Year of Manufacture: 08-2005 On-time hours: n/a Nedpfx Adjwftdmowokt Control: Haas CNC Technical Parameters: ----- - 4-way tool post with Parat quick change system - Z travel: 1,219 mm - X travel: 203 mm - Swing over bed: 406 mm - Swing over slide: 282 mm - Spindle bore: 76 mm - Spindle speeds: 10 - 2,000 rpm - Coolant system - Tailstock / MT 4 - Weight: 2,100 kg Accessories: ----- - 3 Parat cartridges - 3-jaw chuck - Documentation