Central lubrication

SKF Vogel MKU11-KW2-0005+428

Year of construction: 2002, condition: not inspected (used), Robot no control panel + connection cables Chsdogu U Itepfx Af Asc Used, untested robot. No technical documentation available. Not tested.

Condition: excellent (used), Year of construction: 1999, Clamping force: 25 tons Distance between tie bars: 270x270 mm Opening max: 275mm Min Mould height: 200 mm Mold platens size: 400 x 400 mm Screw diameter: 18 mm Injection volume: 20 cm3 Csdpsvl Skgsfx Af Aohc Shot weight: 17 g Injection pressure: 2500 bar Working hours: 38.035 h

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface Ø 125 mm Cedpod Swtaefx Af Ashc Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 9,300 h, load capacity: 3,500 kg, lifting height: 4,700 mm, free lift: 1,500 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, gearing type: automatic, battery voltage: 80 V, battery weight: 1,580 kg, fork length: 1,150 mm, tire condition: 95 %, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), empty load weight: 6,400 kg, total height: 2,200 mm, Equipment: cabin, full service history, lighting, pallet forks, sideshift, trailer coupling, For sale: Used Toyota electric forklift, type 8FBMT 35, year 2018, with triplex free lift mast! Chedjxzr E Eepfx Af Ajc Overall height: 2.2 m Lift height: 4.7 m Load capacity: 3,500 kg Solid rubber tires, 95% Hydraulic sideshift Fork length: 115 cm Includes charger Both drive motors and the rear axle have already been overhauled on the forklift, and the battery has also been replaced! Forklift is immediately available! Forklift is ready for immediate use! Forklift can be inspected and test-driven at our premises! Transport can be organized on request!

Condition: ready for operation (used), Year of construction: 2019, operating hours: 300 h, clamping force: 400 kN, overall weight: 2,180 kg, controller manufacturer: ARBURG, controller model: SELOGICA direct, Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details. Chjdpjzvm Azofx Af Aec - Control System: SELOGICA direct- Clamping Force: 400 kN- Opening Force: 130 kN- Opening Stroke: max. 350 mm- Mold Mounting Height (min.): 200 mm- Platen Distance (max.): 550 mm- Distance Between Tie-Bars (H x V): 270 x 270 mm- Size of Mold Platens (H x V): max. 446 x 446 mm- Weight of Movable Mold Half: max. 180 kg- Ejector Force / Stroke: max. 30 kN / 125 mm- Dry Cycle Time (EUROMAP): 1.2 - 189 s-mm- Injection Unit Size: 100- Screw Diameter: 20 mm- Effective Screw Length (L/D): 25- Screw Stroke: max. 100 mm- Calculated Stroke Volume: max. 31 cm³- Shot Weight (PS): max. 29 g- Material Throughput (PS / PA6.6): max. 5.5 kg/h / 2.8 kg/h- Max. Injection Pressure: 2500 bar- Max. Holding Pressure: 2500 bar- Max. Injection Rate: 64 cm³/s- Max. Screw Torque: 120 Nm- Nozzle Contact Force / Retraction Stroke: max. 50 kN / 180 mm- Heating Capacity: 4.95 kW- Hopper Capacity: 1.8 L- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor / Heating Rated Current: 42 A / 11 A- Total Rated Current: 53 A- Total Connected Load: 29 kW- Pump Motor Power: 11 kW- Hydraulic Oil Capacity: 165 L- Net Machine Weight: 2,180 kg

Year of construction: 2005, condition: excellent (used), Pneumatic punching machine. Cedpsff Apwsfx Af Aohc

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 47885/05, pneumatic punching of window profiles Chodpfx Aeff Apisf Ajc stroke 20 mm

Condition: used, Year of construction: 2015, functionality: fully functional, complete nitrogen generator with 30 bar booster and storage tanks Chsdpsy N Tcqjfx Af Aoc

Condition: new, Amada/promecam style Centrical 1V press brake dies Chodpfein I Hrex Af Aoc

Condition: good (used), Year of construction: 1998, operating hours: 2,250 h, functionality: fully functional, machine/vehicle number: 174667, clamping force: 500 kN, overall weight: 21,300 kg, For sale is an Arburg 320 S 500-150 injection moulding machine. The unit is in good condition. Manufacturer: ARBURG Model: ALLROUNDER 320 S Type / Version: 320 S 500-150 Machine number (serial number): 174667 Year of manufacture: 1998 Clamping force: 500 kN Voltage: 400 V 3∼ Frequency: 50 Hz Chsdpfx Afoxvxrzo Asc Operating hours: 130,746 h Current (unknown): 0.3 A Connected load / Power (unknown): 1×15.00 kW Total weight (unknown): 21.3 t Transport and loading can be organised Europe-wide for an additional charge if required. Prices are excluding VAT. Inspection possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange is possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you interested in selling yours? For more information or to contact us, please visit our website.