Inverter

SMA SB 3000TL HC

Condition: used, functionality: fully functional, overall weight: 1,700 kg, total length: 2,600 mm, total width: 1,200 mm, total height: 2,200 mm, motor manufacturer: Schorch, power: 90 kW (122.37 HP), fuel type: electric, volume flow: 1,404 m³/h, Used Sabroe SAB 163 BF NH3 screw compressor on a steel base frame. Complete with a Schorch KN7250S-AB014-152 electric motor - 50 Hz - 90 kW - 2960 RPM, Sabroe OHU 6022 D oil separator, safety switches and a UNISAB II system controller. Dodetix U Dspfx Addjcr

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the foundry has been known of been able to produce highly demanding castings particularly in high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the moulding department and meltshop are intact and available. Dcedpfxsuxmt Te Adder All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Dsdpsvryhyofx Addjcr Elmepla saw Battenfeld R200/6 Battenfeld V125

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR Dsdpfx Adsp Audqsdecr INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002

Condition: excellent (used), Year of construction: 2008, 300 Kg load capacity welding rotary table, with hollow shaft diameter 125mm Dcsdpfx Adelamtbsdjr with jaw chuck 320mm or 400mm very robust speed infinitely variable from 0,15 to 5,0 rpm current transmission 350 A diameter rotary table 400mm inclination up to 135 height horizontal 835mm, tilted to center approx. 735mm length 850 mm x width 580 mm

Condition: good (used), filter area: 75 m², pressure: 15 bar, System: used chamber filter press ( refurbished ) Design: side rail guided Construction: optional according to customer requirements, e.g. also mounted in a container Dsdpfjqakhujx Addscr Filter plate format: 800x800 mm Number of plates: 68 Filter plates: PP Cake thickness: 30 mm Drain: closed Filter cloths: optionally available depending on the medium Filter area: approx. 75.21 m² Press capacity: approx. 1081.2 dm3 Plate pack length: approx. 4243 mm Filter pressure: approx. 15 bar Plate transport: manual Plate closure: electro-hydraulic plate closure Safety equipment: optional according to customer requirements and design Accessories: optional as special accessories Control cabinet: optional Electrics: electrical wiring of all consumers optional. Pump technology: optional Condition: refurbished Purchase or rental: Viewings of the systems by arrangement at our factory. Would you like to rent or buy this system? Please contact us, we will be happy to assist you.

Condition: new, Brugger FMP 225 Forestry Mulcher – New, 225 cm working width, ideal for heavy-duty mulching tasks! The Brugger FMP 225 is a robust forestry mulcher designed for agricultural, forestry, and fallow land applications. Featuring a double belt drive, 36 tungsten-carbide-tipped hammers, and hydraulic equipment, it is ideally suited for tractors from 110 hp – reliable, powerful, and built for tough jobs. Dcjdpfx Ajwhyw Eoddjr Technical Data – Brugger FMP225: Working width: 225 cm Drive: Double belt drive (5 + 5 V-belts) PTO speed: 1000 rpm Required power: 110 – 160 hp Weight: approx. 1,800 kg Mounting: Three-point linkage CAT II / III Italian CMR gearbox Rotor shaft Ø: 219 mm (465 mm with hammers) Hammers: 36 pieces, tungsten-carbide-tipped Working depth: –70 mm / –30 mm / +10 mm (3-stage adjustable) Housing: 8 mm wall thickness, 12 mm side panels Hydraulic connections: 2x double-acting (1x for tailgate, 1x for pressure roller) Equipment: Hydraulic rear flap & pressure roller Included: PTO shaft Prices + VAT: Brugger FMP180 180cm – 30 hammers, 1,600kg = €10,900 Brugger FMP200 200cm – 32 hammers, 1,700kg = €11,900 Brugger FMP225 225cm – 36 hammers, 1,800kg = €12,900 ----- Contact us for a tailored quote!

Year of construction: 2009, condition: ready for operation (used), A flexographic printing, slitting, die-cutting and gluing system with bundle ejector (Flexo Foldergluer) for corrugated board production and processing DY Machinery is available. Processes: Feeding, printing, creasing, slitting, die-cutting, folding, gluing, bundle ejection. Production speed: 220 sheets/min, max. sheet guide X/Y: 1200mm/2750mm, max. printing area X/Y: 1170mm/2700mm, min. sheet dimensions X/Y: 320mm/600mm, total system weight: approx. 42t. 1) Belt feeder with vacuum, dust separator, speed indicator and alignment device. 2) Top-side flexo printing with draw roller transfer, ink stop sensors and automatic cleaning. 3) Creasing and slitting unit with trimming and glue flap knife, slitting knife thickness: 8mm. 4) Rotary punch with polyurethane anvil and soft punching system, punching dimensions: +/-25mm. 5) Downward folding and gluing unit based on VALCO VC 350 AG system. 6) Top stacker with bundle retention system for bundle ejection. 7) Central control system ACCS-2000 with an order storage capacity of 100,000. The entire system has a remote control system for the flexo units, folding and gluing unit and bundle ejector. Documentation available. On-site inspection is possible. Expected to be available from October 2025. Dcjdpfx Aeu S I D Rsdder

Condition: new, Year of construction: 2024, Column lift turning device 3000 kg load capacity Dedpsu Auumsfx Addscr Positioner Sideros Syncrolift Double column Radio remote control (wireless) Year of construction 2024 Load capacity 3000 kg Minimum working height: 1100 mm Maximum working height 1600 mm Speed 1 rpm Vertical adjustment 500 mm Clamping plate diameter 800 mm Rotation 1.5 kW Lifting motor 2 x 1.5 kW Various column lift turning devices are available: 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10000 kg, 20000 kg Request a quote

Condition: used, Power converter, power converter, controller, inverter, inverter, solar power converter -Manufacturer: SMA Schüco, Sunny Boy Photovoltaic Inverter -Type: SB 3300 -PAC nom: 3300 W Djdpfxoin Rnxe Addjcr -Dimensions: 440/360/240 mm -Weight: 42 kg